Reviews Fender Extensions

MudBusters Fender Flares for the Yamaha Wolverine RMAX2 1000 (Max Coverage)

  • FRONT, UPPER AND LOWER REAR ADDED COVERAGE: 6 inches of additional coverage above your front tire, 2.5 inches in the middle of your front fender AND 3.5 inches behind your front tire! Upper and Lower Rear fender flares add 4 inches of additional coverage in front of your rear tire adding protection behind the driver and passenger side cab. Upper rear flares attach to your dump bed adding 2 inches above your rear tire and 4 inches of additional coverage beside the rear tail light!.
  • EASY TO INSTALL: MudBusters fender extensions are pre-formed, allowing for easy installation. The structural rigidity of MudBusters pre-formed fender flares makes a built-to-last and durable product. Every fender flare kit includes hardware and instructions with pictures to install this product in less than an hour..
  • FITS ALL 2021 RMAX 2's WITH STOCK FENDERS.
  • SAVE TIME: Give yourself and your passengers better coverage, more time for fun, and less time to clean! MudBusters further reduce the amount of mud and dirt spinning up onto your machine, you, and your gear, adding more time for you to enjoy your ride..
  • MADE IN THE USA: All of our products are made here in the United States from high-quality American made materials sourced throughout the country..
Check Stock

Smittybilt XRC GEN2 Armor Front for Jeep JK 2/4Door

  • Maximizes wheel well clearance and provides ultimate protection.
  • PP+TPO slip strips provide 5/16" additional damage protection.
  • Integrated Halo fog light and turn signal for front fenders.
  • Allows articulation room for up to 40" tires.
Check Stock

TeraFlex 4304450 JK Rear Big Rotor Kit with Caliper Brackets

  • Max Tire Sport/Overland Fenders: 33” Rubicon Fenders: 35”.
  • Max Tire Diameter rated w/ stock wheel backspacing..
  • Wheels w/ less backspacing than stock (4. 5-5” backspacing) will require at least 0. 5” Rear Bump Stop Strike Pad Extensions to avoid tire rubbing on the inner fender liner at full compression when articulated. – NOT INCLUDED..
  • Included Components: Instructions Hardware 4 Spring Spacers Bumpstops.
Check Stock

Kiwi Master Fender Flares Extensions Compatible for 2014-2023 Polaris RZR XP/4 1000 Accessories Extended Mud Flaps Guards

  • ▶ PERFECT FIT POLARIS RZR 1000 FENDER FLARES – Fits 2014-2023 RZR XP 1000 and XP 4 1000 models, A must have for your RZR XP 1000. (Does not fit the S and Trail models).
  • ▶ DURABLE HDPE RZR 1000 FENDER EXTENSIONS – Made from tough High Density Polyethylene (HDPE) to save weight and ensure strength and durability for any type of riding or racing.Keeping the mud from reaching the interior cab over the wheels.Keeping the floor area free of dirt and mud..
  • ▶ KEEPING MUD OFF THE RIDERS – The flaps keep the spray out of the back of your RZR XP 1000. Prior to installation the inside of your hard top would get splattered with mud just driving on a dirt road. It stays dry when you have installed the flaps.
  • ▶ COOL PERFORMANCE – Light weight and extremely durable, engineered to endure the harshest environments from the desert heat to the arctic cold. Won’t crack or warp from temperature extremes. Has a clean matte finish to match the OEM fenders..
  • ▶ EASY INSTALLATION – All mounting hardwares with instructions included, search for installation videos may help you. Full warranty,support return for undamaged,full non-defective products within 30 days after receipt of goods,satisfaction guaranteed.
Check Stock

3M Heavy-Bodied Seam Sealer 08308 Two-Part Self-Mixing Automotive Epoxy 200 ml/6.75 fl oz Cartridge White

  • Seals Cracks, Crevices And Body Seams, Plus Waterproofs And Insulates.
  • Flexible - Will Not Shrink, Harden Or Crack.
  • For Firewalls, Floor Pans, Trunk Seams, Fender Extensions, Taillight Openings.
Check Stock

ReadyLift 69-5212 3 F / 2 R SST Lift Kit - Toyota Tacoma TRD / SR5 / Rock Warrior

  • Tacoma Max Lift: 3.0"F/2.0"R - Max Tire Dia: 32.5".
  • Allows for up to a 33 x 11.5 tire on an 8" wide wheel with 5" backspacing with minor trimming of the inner fender liner.
  • Steel upper strut extensions are the strongest on the market and are designed to position the strut alignment properly with the control arm and upper....
  • Professional installation time is estimated at two to three hours. An alignment will be necessary after installation.
  • Guaranteed for life against manufacturing defects.
Check Stock

Vito's Performance Compatible with Yamaha Banshee fenders + Gas Tank Plastic + Grill + Graphics Black & Yellow 2003

  • Saves a lot of wear and tear on your sportsman, protects occupants from rocks and debris that are thrown by your tires.
  • Perfectly matches the overall vehicle styling, gives your Compatible with Polaris a rugged and cool look..
  • High Quality and Durability - ATV fenders made from high Compatible with Impact plastic, which is strong and durable enough to stand up to the harshest environments, from desert heat to arctic cold with ease..
  • Excellent Appearance- Our ATV Compatible with Fender extensions will make a great addition and offer a new look for your vehicle, rather than being an additional piece of plastic..
  • Improve the overall beauty of your vehicle, make it unique and attractive. High hardness, stain resistance and easy to clean..
Check Stock

Adjustable Pontoon Boat Square Rail Fender Cleat/Clip/Hanger for Bumper, 4 Pack

  • Features: Boat fender clips can help you adjust the position of the fender easily and quickly to suit different docking situation. This is a pontoon fender clips focusing on efficiency and convenience..
  • Specifications: Pontoon clips are designed to clamp on 1 inch and 1.25 inch square tube rails securely. They can be repositioned quickly, which solve the problem of lashing and unfastening fender lines constantly..
  • Applicable: Suitable for 1 / 4 to 3 / 8 inch fender line, the height of the fender can be adjusted easily, and the fender can be fixed firmly by pressing the rope into the groove of the fender cleat after adjusting the height of the fender..
  • Material: The pontoon clips for bumper constructed from eximious ABS material are durable and will not scratch your boat rails. The surface of boat fender hangers are smooth and don't worry about scratching your sofa on your pontoon boat..
  • Attributes: Contains 4 gray pontoon fender hangers, made in the United States. We provide you with 100% satisfaction guarantee and 24-hour customer service..
Check Stock

Front Fender Mudguard, Aukson Motorcycle Accessory Fit for Triumph Bonneville T100 2001-2016(Black)

  • √√√Perfect compatibility:Motorcycle front fender mudguard fits for Triumph Bonneville T100 2001-2016.Please check and compare the compatibility before you placing an order. - motorcycle front fender.
  • √√√Easy installation:Easy and convenient for installation, it is reliable and durable to use. If you have any question,please get in touch with us as soon as possible. - motorcycle rear fender.
  • √√√Function:This motorcycle front fender is mainly used to effectively shelter from water and mud of the road surface. - motorcycle fender.
  • √√√Premium material:Made of quality ABS and stainless steel material, it is wear-proof and corrosion proof. - triumph bonneville front fender.
  • √√√Direct replacement:It is manufactured according to original standard, a wonderful replacement for the old or broken one. - front fender 2008 triumph scram....
Check Stock

OEMTOOLS 24900 Black Vinyl Fender Cover 27 x 34 Fender Covers for Mechanics Vinyl Cover for Car Holds Tools in Place Cleans Won t Scratch Surfaces

  • AUTOMOTIVE FENDER PROTECTOR: Large vinyl car cover provides maximum protection for the fender on your vehicle as you perform automotive repairs and....
  • VARIETY OF USES: These fender guards make excellent fender covers for cars and fender covers for boats.
  • Ideal front or rear fender cover, folding....
  • WON'T CAUSE DAMAGE: Our master fender covers offer vinyl paint protection and won't scratch surfaces as they cover your fender.
  • PROTECTION FROM SUBSTANCES: This auto fender protector is made from grease-resistant and acid-resistant material, preventing dangerous and harmful....
  • CONVENIENT FEATURES: Our car fender protector includes a tool ridge that holds tools in place for easy access while you complete auto maintenance and....
Check Stock

OEMTOOLS 24902 Vinyl Fender Cover 27 x 34 Fender Covers for Mechanics Vinyl Cover for Car Holds Tools in Place Cleans Won t Scratch Surfaces Green Vinyl

  • AUTOMOTIVE FENDER PROTECTOR: Large vinyl car cover provides maximum protection for the fender on your vehicle as you perform automotive repairs and....
  • VARIETY OF USES: These fender guards make excellent fender covers for cars and fender covers for boats.
  • Ideal front or rear fender cover, folding....
  • WON'T CAUSE DAMAGE: Our master fender covers offer vinyl paint protection and won't scratch surfaces as they cover your fender.
  • PROTECTION FROM SUBSTANCES: This auto fender protector is made from grease-resistant and acid-resistant material, preventing dangerous and harmful....
  • CONVENIENT FEATURES: Our car fender protector includes a tool ridge that holds tools in place for easy access while you complete auto maintenance and....
Check Stock

KEMIMOTO Compatible with 2022 Grom Fender Eliminator Kits MSX125 Grom License Plate Bracket Holder 2022 2023 Grom Tail Tidy

  • 【FITMENT】:ONLY compatible with 2022 2023 Grom MSX125. Please check the motorcycle model before ordering. This fender eliminator DOES NOT fit with OEM turn signals..
  • 【Meterial】: The 2022 grom fender eliminator is made of Aluminum Alloy, It is not only very light but also very hard. Besides, the surface coating of fender eliminator kits license plate holder is bright black. Your motorbike looks cooler after installing it..
  • 【FEATURE】:This fender eliminator fits with MSX125 bike perfectly, the aftermarket turn signals could be installed on this grom fender eliminator directly. The fender eliminator with unique side design..
  • 【INSTALLATION】:Grom fender eliminator is very pretty straightforward with the install. Unplug all stock wiring, filter out of the tail, take off the fender, take off blinkers and tag light from stock fender, install plate, tag light, blinkers, filter wires back up into bike and tighten the bolts!.
  • 【Package】The package with fender Eliminator, plate, bolts and manual. If you have any other problems, please feel free to contact us, we are always here for you..
Check Stock

Yungeln Rear Mudguard Scooter Fender Bracket Scooter Replacement Accessory Support Mudguard Bracket Fender Compatible with Scooter Xiaomi 1S / M365 / Pro

  • Material--Rear fender and fender bracket are made of high density plastic material,with strong toughness and good wear resistance,good anti-oxidation performance,no fading for a long time, no deformation high practicability and durability..
  • Rear fender--Has the function of preventing mud and water splashing,necessity on rainy days prevent the mud to dirt your clothes when riding the scooter,can prevent splash ups and protect your tires during use..
  • Fender bracket--Can prevent the fender from being jolted on the way,can keep the fender stationary in one position solve the fender sloshing problem,alsoit eliminates the possibility of the LED cable touching the wheel,the cable protection point,located under the rear mudguard,protects the led light cable from wear..
  • Easy to install--Just unscrew the rear warning light screw,fix the mudguard bracket on your 1S / M365 / Pro Electric Scooter with existing bolts..
  • Packing List--1x rear fender,1x fender bracket,4x rear fender screw cover,3x screw..
Check Stock