Reviews Female Threaded Adaptor

Class A Customs | 30 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-3000-BPK-PUMP

  • ...y Water Storage ||WATER TANK MEASUREMENTS: 34 1/2” Longest Length (not including fittings) x 12” x 17 1/2” (rotate tank to change height or width) Average thickness 7/32” +/- (+/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5" Threaded Female NPT Standard - open fitting, unsealed.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT hook garden hose directly to tank doing so will cause tank to explode resulting in damage..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
  • classAcustoms 12 VOLT FRESH WATER PUMP | on demand diaphragm pump | MODEL # 12V3 - READ INCLUDED INSTRUCTIONS BEFORE INSTALLATI....
Check Stock

Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit | UM-3000-BPK

  • ...view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES: (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

Shooter's Choice 6.5mm Sectional Rod System

  • (4) brass rod sections with male/female 8/32 threaded ends and swivel handle rod for easy cleaning.
  • 3” . 22 caliber bronze phosphor bore brush.
  • Brass component adaptor, 100 count 1”x1” cleaning patches, Nylon All-Purpose cleaning brush , . 25cal brass pierce point jag, 0. 5 fl. oz. bottle of Shooter’s Choice FP-10 Elite lubricant.
Check Stock

Metra Electronics 99-5839CH Aftermarket Radio Installation Dash Kit

  • Universal Car Radio Antenna Fakra Adapter, Fakra to Din ISO Audio Aerial Adaptor, Motorola Type DIN Male female to Fakra Z Male Female Plug, Car Radio Antenna Fakra to Din Cable DAB Aerial Cable ,Vehicle Aerial Adaptor for Car Radio Antenna, this car radio antenna adapter consists of a Fakra-Z plug and a Motorola DIN plug and is suitable for all types of Fakra jacks.
  • Compatible with : GPS antenna, car audio, GSM antenna, satelite radio, inftainment systems, wireless equipment, wireless infrastructure. Car Radio Antenna Antenna Adaptor fakra to Din Adaptor Convertor Plug Lead FOR Ford Mercedes BMW Alpine, Clarion, Eclipse, Pioneer, Sony etc.
  • Universal Car Radio Antenna Fakra Adapter, Motorola Type DIN Male female to Fakra Z Male Female Plug, Vehicle Aerial Adaptor.
  • Universal Vehicle Car Stereo FM AM Radio Antenna Adapter Cable: Digital Radio DAB+ AM/FM Tuner Pioneer Clarion Kenwood Alpine JVC PP16DAB PP15DAB RXD10 RXD34 RXD35 RXD50 RXD120 IRD30 BD400 CLRD30.
  • Provides free conversion between interfaces of male and fakra male and female to fakra female for auto car vehicle truck..
  • Package Included: 1 Piece Fakra Z Male to DIN Male Antenna Plug Converter.
  • 1 Piece Fakra Z Female to DIN Female Socket 15cm Cable.
  • 1 Piece Fakra Z Male to DIN Plug Male 15cm Cable....
Check Stock

Shooter's Choice 45cal. Pistol Sectional Rod Gun Cleaning Kit

  • Solid brass rod section with female 8/32 threaded end and swivel handle for easy cleaning.
  • Brass component adaptor, 20 count 2.5”x2.5” cleaning patches, Nylon All-Purpose cleaning brush, .45cal brass pierce point jag, 0.5 fl. oz. bottle of Shooter’s Choice FP-10 Elite lubricant.
Check Stock

Shooter's Choice 40cal Pistol Sectional Rod Gun Cleaning Kit

  • Solid brass rod section with female 8/32 threaded end and swivel handle for easy cleaning.
  • Brass component adaptor, 20 count 2. 5”x2. 5” cleaning patches, Nylon All-Purpose cleaning brush, . 40cal brass pierce point jag, 0. 5 fl. oz. bottle of Shooter’s Choice FP-10 Elite lubricant.
Check Stock

PVC Bulkhead Fitting Double Threaded Bulkhead Water Tank Connector for Rain Barrels Aquariums Water Tanks Tubs Pools Spigot Black 3/4 Inch Male 1/2 Inch Female 4 Pieces

  • What you will get: package comes with 4 pieces threaded bulkheads for rain barrels, water tanks, or aquariums, spigot and so on, bringing convenience to your daily life.
  • Size information: the double threaded bulkhead fittings are 3/4 inch male and 1/2 inch female thread, which are applicable models fitting for most items.
  • Quality material: the water tank connector threaded bulkhead is made of quality PVC material, which will not fade, crack, or peel, so it is durable to serve you for a long time, giving you good use feeling.
  • Easy to install: first you need to drill a 25-26mm hole for installation, then assemble the PVC bulkhead and hose adaptor together.
  • Multi-functional tool: the threaded bulkhead will contour to the shape of the round barrels, maintaining your barrel with fresh rain water season after season.
  • It is suitable for both commercial and industrial use.
Check Stock

Shooter's Choice FP-10 Lubricant Elite 4OZ SQZ BTL (FPL04), Multi

  • Cleans: . 22 Rim fire, . 22-. 250 cal, . 223/5. 56mm.
  • (4) brass rod sections with male/female 8/32 threaded ends and swivel handle rod for easy cleaning.
  • 3” . 22 caliber bronze phosphor bore brush.
  • Brass component adaptor, 100 count 1”x1” cleaning patches, Nylon All-Purpose cleaning brush , . 22cal brass pierce point jag, 0. 5 fl. oz. bottle of Shooter’s Choice FP-10 Elite lubricant..
Check Stock

Decision Target System Vol 1 - Concealed Carry Firearms Training Simulator - Dry Fire Training System - 45 Scenarios

  • Solid brass rod section with female 8/32 threaded end and swivel handle for easy cleaning.
  • Brass component adaptor, 20 count 2. 5”x2. 5” cleaning patches, Nylon All-Purpose cleaning brush, . 40cal brass pierce point jag, 0. 5 fl. oz. bottle of Shooter’s Choice FP-10 Elite lubricant.
Check Stock

Magholder Horizontal Pistol Handgun Springfield XD/XD(M) Pistols in 9MM-40cal Magazine Holder (Left)

  • Solid brass rod section with female 8/32 threaded end and swivel handle for easy cleaning.
  • Brass component adaptor, 20 count 2. 5”x2. 5” cleaning patches, Nylon All-Purpose cleaning brush, . 40cal brass pierce point jag, 0. 5 fl. oz. bottle of Shooter’s Choice FP-10 Elite lubricant.
Check Stock

SHOOTER'S CHOICE G10CC VEN HI-TEC GREASE SYRINGE 10CC

  • Solid brass rod section with female 8/32 threaded end and swivel handle for easy cleaning.
  • Brass component adaptor, 20 count 2. 5”x2. 5” cleaning patches, Nylon All-Purpose cleaning brush, . 40cal brass pierce point jag, 0. 5 fl. oz. bottle of Shooter’s Choice FP-10 Elite lubricant.
  • Included components: Bronze brush, cotton mop, Jag, brass components, patches, FP-10 lubricant elite, all purpose brush.
Check Stock

Quickun 1\ ABS Bulkhead Water Tank Connector Adapter Fitting with Plugs Thru-Bulk Pipe Fitting (Set of 2)

  • 【Size Information】: The double threaded bulkhead fittings are 1 inch G male and 1 inch G female thread(Bulkhead OD: 44.6mm)..
  • 【Included】2Pcs bulkhead adapter and 2Pcs plugs..
  • 【Durable】:Material:ABS.This bulkhead fittings will not fade, crack, or peel..
  • 【Easy to Use】:Drill a 44.6mm hole for installation, then assemble the ABS bulkhead and hose adaptor together.
  • 【Function】:Can be mounted in walls, tanks, or panels. Bulkhead design to make the fitting easy through holes..
Check Stock

DCT 4in Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection

  • WOODSHOP DUST CONTROL: Use the DCT 4” Inch Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection to complete your woodshop dust control system by connecting 2 shorter pieces of 4-inch (10.2cm) plastic pipe into one longer pipe for ductwork dust collection.
  • Threaded quick connect adaptor end screws tightly into flexible hose and tapered end offers press-on attachment.
  • HASSLE-FREE: Eliminates the need to connect and disconnect a hose clamp each time a new woodworking machine is used.
  • Takes all of the work out of disconnecting and moving or switching from machine to machine.
  • Stays secure and airtight without sliding off, decreasing airflow, or decreasing dust collection capability.
  • No special adapters for each tool required.
  • EASY TO USE: Designed to quick connect thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp.
  • not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
  • SPECIFICATIONS: Constructed from heavy-duty hard plastic.
  • 1/8-inch (3mm) quick adaptor coupling thickness.
Check Stock