Reviews Faucet Installation Kit

KWODE Commercial Wall Mount Faucet Installation Kit, Wall Mount Kitchen Faucet Mount Kit Backsplash Mount Set for Stainless Steel Commercial Kitchen Prep & Utility Sink

  • Commercial Faucet Installation Kit:This faucet installation kit connected size is G1/2 male(also called 1/2 IPS), not 1/2” NPT, fitting wall commerical faucets with G1/2 female end..
  • LEAK-PROOF DESIGN: It is one-piece construction for no leaking, plastic washers and rubber washers are used together for better leak-proof effect..
  • EASY TO INSTAL :Connect the longer end to the back of wall mount faucet,the shorter end to water line,aganist washes at the back of stainless steel sink by lock nuts to secure faucet.(tips please use the water tape to avoid leakage).
  • INSTALLATION KIT FOR BACKSLASH MOUNT FAUCET:This elbow adapter with 1/2 IPS male ends is designed to install a wall mount commerical faucet on the backsplash of stainless steel commercial kitchen prep & utility sink, which can save you space and increase the service life of the water supply line..
  • SOLD IN PAIR: Comes with 90 degree angled elbow joint x 2, lock nut x 2, stainless steel washer x 2 and rubber washer x 2..
Check Stock

KWODE 2-Handle Commercial Sink Faucet 8 inch Center Wall Mount Kitchen Faucet with 8\ Swivel Spout for Home Restaurant Kitchens Brass Constructed Chrome Finish

  • ❤8 Inch Center Commercial Wall Mount Faucet with 8” Swing Nozzle Add-on Spout, Best for 1 or 2 compartment sinks in your home or restaurant.All The Parts you can get separated like 90 degree Installation Kit, Other size spout(like 6” 8” 10” 12” 14”) even if the gooseneck Spout, you can Search “KWODE” to find it..
  • ❤Practical Designed Commercial Faucet: 2-hole wall mount faucet with 7-9 inch adjustable hole center, meets most customer with 8 inch irregular center faucet distance. Max 2.2 GPM water Flow. Lead free brass constructed with superior rust resistant chrome polished finish resist corrosion and tarnishing against every use..
  • ❤Wall Mounted Faucet: 8-inch center commercial faucet with 8 inch swivel swing spout nozzle easy to be compared with your ceramic/acrylic/crystal stone or prep utility sinks. Chrome Plated copper to make it clean and 360°rotated 8” add on spout by hand..
  • ❤Backsplash Mount Installation Faucet: 2-hole wall mounted installation, easy to install, just 10 minutes finish without plumber need. Just tighten up the nut and connect the water supply that is enough.(Attention: Please make sure each gasket in each female thread before installation).
  • ❤Reliable Quality Products: 5 years replacement warranty f....
Check Stock

Garden Sprinkler, Kadaon 360 Degree Rotating Lawn Sprinkler Large Area Coverage - Adjustable, Weighted Gardening Watering System

  • ...tion system can automatically water after turning on the tap, which can save up to 70% of water compared to manual watering. The precision sprinkler system can slowly and accurately deliver the right amount of water to the root area where the plants need it..
  • ❤ Wide Range of Application: Irrigation kit simple installation, no need to excavate or excavate pipeline technology. During the installation process, you can enjoy the fun of DIY. The irrigation system kit is very suitable for atomization, lawn irrigation, terraces, gardens, vegetable irrigation, roof cooling, family homes, irrigation, agriculture, greenhouses, flower beds, pool mist, mist cooling, irrigation, etc..
  • ❤ Install all faucets: 30M drip irrigation kit contains 125 watering accessories. With 2 types of threaded faucet connectors. ①If your home faucet is 3/4'', please directly install a black 3/4'' Threaded Faucet Connector. ②If your home faucet is 1/2'', Install the green 1''2 converter on the faucet first, then install a 3/4'' Threaded Faucet Connector. ③If your home faucet is without thread, please use Universal Faucet Connector. (as shown in image 3).
Check Stock

Pull Down Spray Hose Kit Compatible with Moen Kitchen Faucet Replacement Parts # 150259 Hose, Nylon Finish 67 Inch Length Compatible with Moen Kitchen Faucet Replacement Part 187108 Pull Down Hose

  • Compatible with Moen pulldown kitchen faucets: Please check the faucet model before placing an order, make sure this fits by entering your model number. This kitchen faucet replacement hose kit is ONLY compatible with Moen pulldown kitchen faucets No.150259, NOT the pull out faucets..
  • Easy Installation: Kitchen sink hose replacement is exactly the same one that needed to be replaced and compatible with your Moen pull out faucets. The installation process of pull down faucet hose is the reverse of the disassembly process, quick and easy installation, no tools and glue needed..
  • Durability and Convenience: The same brass end fitting connection of kitchen faucet hose allows for 360° rotation-free. The length of kitchen faucet replacement hose is 67 inch, perfect fit when replacing your kitchen faucet hose! kitchen faucet hose replacement ensuring quality durability and convenience..
  • Not leaking: Pull down faucet hose is made of high-quality metal and nylon materials. Kitchen sink hose replacement is perfectly connected to the kitchen faucet hose and prevent your kitchen faucet sink from leakage. Built for longer-lasting use with less headaches!.
  • Trustworthy after-sales: We provide 1 year warranty for every Hibbent replacement hose kit for Moen pulldown....
Check Stock

Drip Irrigation Kit, Garden Irrigation System, 156Pcs Automatic Garden Watering System with Adjustable Dripper 82ft 1/4\ Blank Distribution Drip Irrigation tubing, Garden, Flower Bed,Patio,Lawn

  • ...tion system can automatically water after turning on the tap, which can save up to 70% of water compared to manual watering. The precision sprinkler system can slowly and accurately deliver the right amount of water to the root area where the plants need it..
  • ❤ Wide Range of Application: Irrigation kit simple installation, no need to excavate or excavate pipeline technology. During the installation process, you can enjoy the fun of DIY. The irrigation system kit is very suitable for atomization, lawn irrigation, terraces, gardens, vegetable irrigation, roof cooling, family homes, irrigation, agriculture, greenhouses, flower beds, pool mist, mist cooling, irrigation, etc..
  • ❤ Install all faucets: 30M drip irrigation kit contains 125 watering accessories. With 2 types of threaded faucet connectors. ①If your home faucet is 3/4'', please directly install a black 3/4'' Threaded Faucet Connector. ②If your home faucet is 1/2'', Install the green 1''2 converter on the faucet first, then install a 3/4'' Threaded Faucet Connector. ③If your home faucet is without thread, please use Universal Faucet Connector. (as shown in image 3).
Check Stock

Danco 10303 Moen Replacement Handle, Acrylic

  • REPLACEMENT HANDLE FOR MOEN: This classic knob handle replaces Moen OEM # 96782 & 96791 (Bathroom Sinks) and 96797 & 98039 (Tub/Showers) single-handle faucets that were installed before 1990.
  • REPLACEMENT HANDLE DIMENSIONS: 1-21/32 inch diameter at base and 1-3/4 inch height.
  • COMPATIBILITY: This kit is designed specifically for use with Moen One-Handle bathroom sink tub and shower valves and WILL NOT FIT Moen Posi-Temp or ExactTemp faucet valves.
  • INCLUDED COMPONENTS: This Moen tub shower handle replacement includes (1) knob handle, index button with hot and cold graphics and the installation screw.
  • DURABLE CONSTRUCTION: The clear acrylic construction provides strength and reliability to this Moen faucet replacement handle.
  • HASSLE-FREE INSTALLATION: This complete Moen faucet handle replacement is designed with all parts needed for an easy installation.
  • INSTALL INSTRUCTION TIP: Place replacement handle onto faucet stem with point facing up to start off the installation.
  • TOOL REQUIRED: Phillips Screwdriver is needed to complete this DIY installation.
Check Stock

Sink Faucet Hose Sprayer Attachment,Handheld Bidet Toilet Sprayer,Dual Function Faucet Sprayer Rinser,Bathroom Shower Head Baby Cloth Diaper for Feminine Hygiene,Bathing Pets,Chrome Finish

  • Healthy Personal Hygiene: This sink faucet hose sprayer cleans person hygiene from bottom,especially for women pregnancy and menstrual....
  • Water Pressure Control: The faucet sprayer set has 2 spray modes:jet spary and soft mode. Gentle soft mode for feminine bottom cleaning,baby bath,or....
  • Two Mount Methods: The bathroom faucet sprayer rinser has two ways of installation,you can hook sink hose sprayer holder to your toilet tank that save....
  • Premium Quality:The faucet sprayer rinser has superior chrome finish for rust-proof,anti corrosion,and easy to maintain and operate. The faucet....
  • Easy Installation: Sink hose faucet sprayer attachment comes with all installation kit.Frustration free to finish installation in a few....
Check Stock

Tiny Home for Military Couple

  • [Solid Construction Every Part - No Leak/ No Loose]: Stainless Steel Draft Beer Tower with standard threads for faucet installation, further fix with faucet wrench, no leaks & no loose. Popular for indoor/ outdoor family gatherings or commercial applications like bars, hotels, and restaurants, etc..
  • [Contents Everything You Need For A Beer Tower]: Comes with 1 stainless steel column, 2 brass faucets, 2 of 5 feet 3/16" I.D. tubing, 1 beer tower gasket, 4 of M6 screws and nuts, 2 clamps, 2 beer faucet springs, 2 beer faucet soothers, 1 beer tap wrench, and 1 cleaning brush. A complete beer dispenser tower..
  • [Safe & Strong Material & Shiny Surface]: High-quality material long-last beer tap tower for homebrew. Rustproof stainless steel column, safe for beverage beer tubing, solid brass faucet with stainless steel core, stainless steel screws, and springs for longer service. The surface of the beer tower and beer faucet are both electroplated for better wear resistance..
  • [Few Minutes for Easy Installation Convenient Kit]: Pre-assembled faucet shanks and beer lines to save your time. 1. install this on a bar counter, then drill a hole on the countertop, place the gasket, pass the hose through the hole, use screws to fix the tower, and install the faucet. 2. D....
Check Stock

SENLO Price Pfister Faucets Bathtub and Bathroom Shower 3-Chrome-Handle Remodel Rebuild Repair Replacement Tub Trim Kit Compression Valve Stem Verve 6-Step Metal Removal Faucet Seat Bibb Wrench Tool

  • Super Easy To Install - SENLO Price Pfister shower valve and trim kit features as its simple installation and can be fitted in just a few minutes. You don't need to call a professional plumber for help, and you can get the job done with some necessary household faucet tools. In order to realize home improvement, each package includes installation shower tools and valve stem removal tools to get the job finished excellently..
  • Save Your Time Our bath tub repair kit comes with a 6-step faucet seat wrench. With this convenience, you don't have to spend additional time finding this tool, when you try to remove tub seat. This is one of the main reasons why so many people choose our replacement trim kit..
  • Beautify Your Bathroom - As you can see, tub and shower repair kit with 6-step bibb seat wrench is the perfect solution to your water-use issues. Classic designed bathroom remodel kit provides more elegant visual satisfaction. Chrome plated handles and faucet escutcheons will also beautify your bathroom..
  • Durable Construction - Our Price Pfister stem kit and shower set is made from only the finest materials. It is designed out of solid metal that is finished in beautiful champagne chrome. Durable brass faucet cartridges and metal handle construction pro....
Check Stock

Delta Faucet Classic 2-Handle Widespread Roman Tub Faucet Trim Kit, Deck-Mount, Stainless T2705-SS (Valve Not Included)

  • ROUGH SOLD SEPARATELY: Faucet trim kit only, purchase Delta rough-in kit R2700 or R2707 separately to complete the unit.
  • ROMAN TUB FAUCET: Pair this deck-mount bath faucet with your new or existing Roman bath tub. Recommend 10-16 inch centers to ensure full handle clearance.
  • EASY INSTALLATION: Designed to fit 3-hole, 8-16-in. Widespread tub faucet configurations.
  • LIFETIME LIMITED WARRANTY: You can install with confidence, knowing this Delta Roman tub faucet is backed by Delta Faucet's Lifetime Limited Warranty.
  • 2-HANDLE DESIGN: The two-handle, widespread design provides total control in finding the perfect water temperature. ADA Compliant.
Check Stock

Jupiter Ionizer Undersink Installation Kit - 2 Headed - Chrome Faucet

  • THIS PRODUCT ONLY WORKS WITH THE ALKAVIVA/JUPITER MELODY AND ATHENA IONIZERS, NON-H2 MODELS****.
  • 2 Headed Faucet Kit - This Kit provides a 9" Tall Chrome faucet with two water outlets.
  • Alkaline Water disperses from the taller outlet & the acidic water disperses from the shorter outlet.
  • Cold Water Adapter - to connect to cold water line, Special Adapter - Connects the Alkaline Output to the Faucet.
  • Diagram and Instructions for Installation.
Check Stock

Dual Tapper Electric Handheld Percussion Massager by Fatherland Shop

  • [Solid Construction Every Part - No Leak/ No Loose]: Stainless Steel Draft Beer Tower with standard threads for faucet installation, further fix with faucet wrench, no leaks & no loose. Popular for indoor/ outdoor family gatherings or commercial applications like bars, hotels, and restaurants, etc..
  • [Contents Everything You Need For A Beer Tower]: Comes with 1 stainless steel column, 2 brass faucets, 2 of 5 feet 3/16" I.D. tubing, 1 beer tower gasket, 4 of M5 screws and nuts, 2 clamps, 2 beer faucet springs, 2 beer faucet soothers, 1 beer tap wrench, and 1 cleaning brush. A complete beer dispenser tower..
  • [Safe & Strong Material & Shiny Surface]: High-quality material long-last beer tap tower for homebrew. Rustproof stainless steel column, safe for beverage beer tubing, solid brass faucet with stainless steel core, stainless steel screws, and springs for longer service. The surface of the beer tower and beer faucet are both electroplated for better wear resistance..
  • [Few Minutes for Easy Installation Convenient Kit]: Pre-assembled faucet shanks and beer lines to save your time. 1. install this on a bar counter, then drill a hole on the countertop, place the gasket, pass the hose through the hole, use screws to fix the tower, and install the faucet. 2. D....
Check Stock

Multipure Aquaversa Model MP750 Drinking Water System With Inline Connecting Hardware

  • This model includes a below sink installation kit, allowing it to be attached to a cabinet wall below the sink with an included mounting bracket..
  • The two quick connect fittings accept 1/4″ flexible tubing. The kit includes 36″ of 1/4″ clear, flexible tubing..
  • The kit also includes the Adapta Valve, which connects to your cold water supply, along with 36″ of 3/8″ tubing to connect to the Adapta Valve.
  • This drinking water system does not include a faucet. You may use your own faucet that accepts 1/4″ flexible tubing, or hook the system up to your refrigerator or any other custom installation..
Check Stock