Reviews Faucet Handle Compression Sleeve Puller

Compression Sleeve Puller Tool Remove Ferrule & Nut Of Pipe, Ferrule Puller For 1/2” Copper Water Compression Sleeve & 1/2-Inch Copper Tubing, Plumbing Tools Compression Ring Removal Tool

• 【No Damage To Walls & Copper & Supply Lines】This ferrule puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This compression sleeve puller removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this tool and make your life easy. Designed by plumbing professionals. Precision machined plumbing tool..
• 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. Re-designed bullet nose will not pull off and is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple..
• 【Work On Corroded & Frozen】Even such as the existing valve was severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut....

Compatible with Compression Sleeve Puller（03943）-- Sleeve Remover for 1/2-Inch Compression Fittings Only -- Corroded & Frozen Supply Stops --Plumbing Tools Compression Ring Removal Tool

• Make Your Life Easy--This sleeve remover removes 1/2-inch copper water compression sleeve.This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe..
• Saves A Lot Of Time-- if you don't have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. Saves a lot of time around cutting old pipes..
• Resistant & Wear Resistant.--Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe.Ideal for working on frozen or corroded supply stops,corrosion resistant & wear resistant..
• Operating Steps--1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. 4.T....

KSJED 104421 Cartridge Puller Removal Tool, Compatible with Moen 1200, 1222, & 1225 Single Handle Cartridges, Shower Faucet Valve Core Removal Tool

• 【Compatible】: Designed for MOEN sink, MOEN bathroom, and MOEN tub faucets for cartridge repair or cartridge removal or cartridge replacement. 104421 Cartridge Puller fit for Moen 1200, 1222 and 1225 Single Handle Cartridges..
• 【material】: The cartridge puller removal tool are made of stainless steel,which is durable and corrosion resistant..
• 【Function】: The faucet cartridge puller is designed to install and remove brass and plastic cartridges, and only remove the refrigeration cartridge and sleeve on the faucet..
• 【Package included】: 1 x Faucet Cartridge Puller Removal Tool..

Compression Sleeve Puller (4661) - Remove Nut & Ferrule Of Pipe - Ferrule Puller For 1/2” Copper Water Compression Sleeve - 1/2-Inch Copper Tubing - Plumbing Tools Compression Ring Removal Tool

• Saves A Lot Of Time--This ferrule puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. Saves a lot of time around cutting old pipes..
• Make Your Life Easy--This compression sleeve puller removes 1/2-inch copper water compression sleeve. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple..
• Operating Steps--Method 1: Only remove the ferrule---Let the ferrule in between the red notched end of the tool (notched clamping ferrule). Method 2: Both remove the compression nut and ferrule---Place red notched end of tool behind compression nut. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle..
• Resistant & Wear Resistant.--Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe.Easy and fast solve the problem of compression valves failing with small leaks.Ideal for working on frozen or corroded supply stops,corrosion resistant &....

Superior Tool 03876 Pro Handle & Sleeve Puller, Gray

Fiada 2 Pcs Olive Puller Olive Remover Puller Tool Compression Sleeve Puller Ferrule Removal Tool for 1/2 inch and 3/4 inch Brass Pipes

• Applicable Model: the ferrule removal tool can be applied for brass pipes or copper pipes with diameter of about 15 mm/ 1/2 inch and 22 mm/ 3/4 inch,....
• No Damage to the Pipe: the compression ring removal tool is an ideal tool for you to remove olives from pipes, allowing you to remove damaged olives....
• Sturdy for Long Time Use: made of solid brass material, the compression sleeve puller is smooth on the surface, with high strength and hardness, not....
• Simple to Apply: the ferrule puller is easy to use, no need to read the manual or use other tools to work, saving your time and energy, convenient for....
• Wide Range of Applications: the olive puller for compression sleeve has a wide range of applications, to increase torque and remove olives more....

Pipe Olive Remover Puller Tool, CATUDIY Olive Puller for Compression Sleeve Suitable for Brass Pipes Plumbing Tools with Diameters of 1/2 Inch & 3/4 Inches Ferrule (US Standard)

• 【Applicable Model】The compression sleeve puller not damage is suitable for brass pipes with diameters of 1/2 Inch and 3/4 Inch..
• 【Powerful Design】The ferrule puller tool is able to remove used or damaged olives from the copper pipe without damaging the pipe by utilizing compression fittings to lock the inches nut, olive puller can work on air-conditioning pipes.
• 【Ideal Removal Tools】The compression ring removal tool can increase torque, which is suitable for various tasks -- A handy duck puller tool to remove neatly used or damaged olives.
• 【Superior Material】This Olive puller for copper pipes fittings puller are made of solid brass with high strength, high hardness, corrosion resistance, wear resistance, high finish, which have long service life.
• 【Easy Using】The pipe tool can be used easily without checking any manual. Simple operation reduces frustration, saving more time and energy.

LASCO 13-2701 Metal Standard Duty Faucet Handle Puller

• A must have tool for every plumbers toolbox.

MILMUMU Compatible with Compression Sleeve Puller（03943） and Sleeve Remover for 1/2-Inch Compression Fittings Only

• Compression Sleeve Puller and Sleeve Remover for 1/2-Inch Compression Fittings Only.
• Ideal for working on frozen or corroded supply stops.
• Easily removes compression sleeves Won’t damage walls.
• Wt: 11 ounces Dimensions: 6.8 x 4 x 0.8 inches.
• Function: Removes Compression Sleeves without Damaging Pipe. Screws Directly into Compression Nut for Removal.

LASCO 13-2706 Compression Sleeve Puller Tool 4661, 1, SS

• The Compression Sleeve Puller Effortlessly Pulls The Nut And Ferral Off Of The Pipe.
• Removes 1/2-Inch Copper Water Compression Sleeve.

Plumb Pak Faucet Handle Puller PP24041

• 【1222 Faucet Repair Kit】: the shower faucet cartridge repair parts compatible with 1222 shower cartridge.
• package includes 1 x 1222 faucet cartridge replacement, 1 x puller, 1 x retainer clips, 1 x lubricant pack, complete faucet repair kit for assemble or disassemble your faucet cartridge system.
• 【Better Materials Prevent from Leaking】: 1222 replacement cartridge is made of durable brass and plastic, won’t be deformed or damaged after long time use, works in good conditions all the time without leaking or leading to hard-to-turn handles.
• 【Professional for Shower Faucet Repairing】: sized in 4 30 x 1.17 x 1.17 inches, which and are specifically designed to be compatible with moen 1222 series.
• professional design specialized for the 1222 shower cartridge, easy to repair without replacing the entire device.
• 【Easy to Install and Remove with Puller】: the shower repair kit comes with 1 x thick steel puller, which can remove your old cartridge easily without other tools.
• a small pack lubricant for installing the cartridge more smoothly.
• 【Warm Tips for Using】: the 1222 replacement cartridge fits posi-temp tub & shower faucets, the position may various slightly depending on the faucet model, you ....

Armour Line RP77233 Faucet Handle and Sleeve Puller, (single pack) , Red

• Used to remove old faucet handles and seats easily.
• Can be used to remove compression sleeves.
• Adjustable arm allows for use on small or large handles.
• Used as a puller to not damage pipes or knobs.

LASCO 13-2708 Compression Sleeve Puller for 1/2-Inch (5/8 OD) Copper Pipe

• Compression Sleeve Puller pulls the nut and compression sleeve off of the copper pipes.
• Saves time and effort when replacing old angle stops.