Reviews Fan Heatsinks

HEMOTONE Fit for ASUS ROG Rampage V Edition 10 Desktop Board Computer Motherboard Gaming Motherboard

  • Robust Power Design: 8+2 DrMOS power stages with alloy chokes and durable capacitors provide reliable power for the last AMD high-count-core CPUs.
  • Optimized Thermal Solution: Extended VRM and PCH heatsinks, M.2 heatsinks, multiple hybrid fan headers and fan speed management with Fan Xpert utility.
  • Core upgrade: Adopt high-quality design and optimized power supply design to support more cores and provide better performance.
  • Built for e-sports, streaming and games. Operating System: Support Windows 10 64 bit.
  • Enhanced Power Solution: 14+2 DrMOS power stages, ProCool sockets, alloy chokes and durable capacitors for stable power delivery in the most demanding situations.
Check Stock

UCTRONICS for Raspberry Pi 4 Dual Fan, Pi 4 Cooling Fan with Heatsink, Dual Fan Kit for Raspberry Pi 4 Model B

  • Specially suitable for the Raspberry Pi 4 Model B --- One dual cooling fan(50*25*13mm), one thermal tape(50*25*1mm) and two heatsinks(9*9*5mm), perfectly fit to the CPU and the other chips of the Raspberry Pi 4 Model B..
  • High speed and low noise --- The DC 5V dual cooling fan run quietly at high speed, effectively get rid of the noise..
  • Efficient heat dissipation --- The dual fan can be close to the heating chips for efficient heat dissipation with the thermal tape (It can stick the cooling fan with Raspberry Pi stably)..
  • Aluminum alloy material --- High quality aluminum material improves efficient heat dissipation, tough and durable..
  • Easy to install --- Remove the plastic film on the upper layer of the thermal tape and then stick the thermal tape to the bottom of the dual fan. Put the dual fan on the Raspberry Pi 4 Model B motherboard, then connect the red cable to the second pin, connect the black cable to the third pin. Stick the two heatsinks to the capacitance chip and the LAN chip..
Check Stock

GeeekPi Raspberry Pi 4 Fan, Raspberry Pi Cooling Fan 30x30x7mm DC 5V Brushless CPU Cooling Fan with 7PCS Raspberry Pi Heatsink for Raspberry Pi 4 Model B,3B+,Pi 3 & Retroflag NESPI CASE Plus (1-Pack)

  • Used for Raspberry Pi 4,Pi 3, Pi 2, Pi Model B+ & Retroflag NESPI CASE PLUS.
  • The DC 5V cooling fan run smoothly and quietly and it’s good for heat dissipation of Raspberry Pi. It can be assembled easily by screws..
  • The aluminum heatsinks has thermal conductive adhesive tape on the back..
  • Package Includes: 1x Cooling Fan, 1x Screw Set, 3x Heatsinks for raspberry pi 3B+/3B/2B/B+,4x Heatsinks for raspberry pi 4 Model B.
Check Stock

HEMOTONE Fit for Asus M5A78L LE AM3/AM3+760 DDR3 32G PC Motherboards Desktop Board Gaming Motherboard

  • Robust Power Design: 8+2 DrMOS power stages with alloy chokes and durable capacitors provide reliable power for the last AMD high-count-core CPUs.
  • Optimized Thermal Solution: Extended VRM and PCH heatsinks, M.2 heatsinks, multiple hybrid fan headers and fan speed management with Fan Xpert utility.
  • Core enhancement: Adopt high-quality layout and digital power design to support more cores and provide better performance..
  • Core upgrade: Adopt high-quality design and optimized power supply design to support more cores and provide better performance.
  • Enhanced Power Solution: 14+2 DrMOS power stages, ProCool sockets, alloy chokes and durable capacitors for stable power delivery in the most demanding situations.
Check Stock

Smraza Raspberry Pi 3 B+ Case with Fan, RPI Heatsinks, 5V 2.5A Power Supply for Raspberry Pi 3 Model B+(B Plus), Compatible with Raspberry Pi 3 Model B, Pi 2 Model B (4 Layers Case)

  • 4 layer Raspberry Pi 3 B+ Case - Specially designed for the 2018 new version Raspberry Pi 3 Model b+, and compatible with Pi 3B 2B (Not include Pi Board).
  • Fans & Heatsinks Cooling - With DC 5V quiet fan and a set of Aluminum heatsinks to keep raspberry pi cool..
  • Easy to access to all GPIO ports - 4 layers Acrylic case allow you use all ports of pi and won't block signal and perfectly protect your pi components..
  • Convenient to turn on/off pi - Power Cable w/ on off switch button, easy to press button to power on your pi..
  • Easy to install with Instruction manual. Package include: 4 layer dark brown Case, 4pcs rubber feet, 3pcs Aluminum Heatsinks, 1pc Power Supply Adapter(5V/2.5A , Cord length: 59 inch), 1pc Mini Fan and 1pc Phillips Screwdriver..
Check Stock

GeeekPi Acrylic Case for Raspberry Pi 4 Model B & Raspberry pi 3 Model B+, Raspberry Pi Case with Cooling Fan and 7PCS Heatsinks for Raspberry Pi 4 Model B/Pi 3B+/ Pi 3B/ 2B (Clear)

  • 2 pieces of transparent acrylic box parts: easy to assemble and provides full access to your Raspberry Pi.
  • High Quality Acrylic case with fan secures your model Raspberry Pi 3B/3B+/Raspberry Pi 4B.
  • More easily access to the board, power, RCA Video, Audio, USB, LAN (model B only), SD card and Light pipes.
  • Great heat dissipation performance.Comes with assembly screwdriver..
  • Package Includes:1x Acrylic Case with Cooling Fan, 1x Screwdriver, 3 x Heatsinks for Raspberry Pi 3B+/3B/2B, 4 x Heatsinks for Raspberry Pi 4B(Added on 2019.7.26).
Check Stock

GeeekPi Retroflag MEGAPi Case with Functional Power and Reset Buttons Safe Shutdown and Safe Reset with Cooling Fan & Heatsinks for Raspberry Pi 3 B+ & Raspberry Pi 3/2 Model B

  • MEGAPi CASE specifically designed for Raspberry Pi 3 B+ (B Plus) 2.
  • Easy access to the SD-Card and all other ports without opening the case.
  • The Cooling Fan and Heatsinks will solve the overheating problem of your Pi.
  • Package Includes: 1x MEGAPi CASE, 1x Cooling Fan, 1x 3pcs of Heatsinks, 1x Flannel Bag, 1x Screw Driver, 1x Instruction manual.
Check Stock

4 PCS 3D Printer Blower Cooling Fan, 5015 Cooling Fan 50mm x 50mm x 15mm Fan for Hotend Extruder Heat Sinks with 2 Pin Terminal(12V 0.18A)

  • Low noise while cooling the hot end of heatsinks..
  • ✹✹ DC 12V 50mm Blower Cooling Fan Hotend Extruder Turbine Fan for cooling heatsinks on hot ends, prints, or other cooling needs..
  • ✹✹ Easy to cool the filament that is deposited on your print. Cooling your print can make the difference between a beautiful print and a failed print..
  • ✹✹ Size:50mm*50mm*15mm(L*D*H), Speed:6500±10%RPM, Noise:25dBA, Bearing: oil, DC 12V, 0.18A..
  • ✹✹ Note: New & Old Version is shipped randomly.(Any questions, you can contact us and we will give you a satisfied solution!)..
Check Stock

LoveRPi Active Cooling Media Center PC Case with Fan for Raspberry Pi 3, Libre Computer Board, ASUS Tinker Board (Translucent)

  • ULTIMATE PERFORMANCE AND DURABILITY: Exclusively designed for the Raspberry Pi 3 Model B+, Libre Computer Boards, ASUS Tinker Board, and ODROID-C2***, this revolutionary case is built with durable polycarbonate and active cooling fan to provide performance and protection to your SBC..
  • INTRICATE FEATURES: We analyzed over 30 cases and created four revisions to build this final case design. It features numerous design elements not found on any other case and takes into account all of the popular single board computers on the market..
  • QUICK AND EASY ASSEMBLY: Screw optional design uses numerous latches to secure both the board and the case together. MicroSD card slot is extended to prevent damage allow for easy tool-less removal. GPIO ribbon cable slot enables expansion without sacrificing protection..
  • TRANSLUCENT WITH FRONT LED AND IR: Sleek design is perfect for media center applications with a clean glossy front cover for LEDs and IR sensors found on Libre Computer Boards and the ODROID-C2. Raspberry Pi 3 requires separate IR receiver (diode + transistor)..
  • TWO FAN SPEEDS AND SUPPORTS TALL HEATSINKS: Brushless DC fan can be connected to 5V for maximum performance or 3.3V for quiet cooling. Can be used with tall heatsinks up to 12mm for best results..
Check Stock

LoveRPi Active Cooling Media Center PC Case with Fan for Raspberry Pi 3 Model B+, Libre Computer Board, ASUS Tinker Board (Black)

  • MATTE BLACK WITH FRONT LED AND IR: Sleek matte black design is perfect for media center applications with a clean glossy front cover for LEDs and IR sensors found on Libre Computer Boards and the ODROID-C2. Raspberry Pi 3 requires separate IR receiver (diode + transistor)..
  • TWO FAN SPEEDS AND SUPPORTS TALL HEATSINKS: Brushless DC fan can be connected to 5V for maximum performance or 3.3V for quiet cooling. Can be used with tall heatsinks up to 12mm for best results..
Check Stock

Noctua NF-F12 PWM Premium Quiet Fan 4-Pin 120mm Brown

  • Premium quiet fan, 120x120x25 mm, 12V, 4-pin PWM, max. 1500 RPM, max. 22.4 dB(A), >150,000 h MTTF.
  • Award-winning 120x25mm fan with Focused Flow frame for high static pressure and superior quiet cooling performance.
  • Ideal for CPU heatsinks (e.g. Noctua NH-U12(S) series) and water cooling radiators, perfect replacement fan for loud all-in-one (AIO) coolers.
  • 4-pin PWM version for automatic speed control via 4-pin PWM fan headers, broad 300-1500rpm speed range (1200rpm max. with supplied Low-Noise Adaptor).
  • Includes anti-vibration mounts, fan screws, Low-Noise Adaptor, extension cable and y-cable for running two PWM fans on the same header.
Check Stock

Dynatron A14 80mm 2 Ball CPU Cooler

  • Fan & Heatsinks , Socket G34 , Bearing Type 2 Ball , Fan Size 80mm.
  • RPM At Duty Cycle 20%: 1000 RPM , At Duty Cycle 50%: 2000 RPM , At Duty Cycle 100%: 3800 RPM.
  • Air Flow At Duty Cycle 20%: 13.8 CFM , At Duty Cycle 50%: 30.78 CFM , At Duty Cycle 100%: 65.4 CFM.
  • Noise Level At Duty Cycle 20%: 16.0 dBA , At Duty Cycle 50%: 31.5 dBA , At Duty Cycle 100%: 43.4 dBA.
  • Power Connector 4 Pin / Heatsink Material Aluminum.
Check Stock

GIM KB-17 PWM Case Fan 120mm High Performance Cooling Quiet Fan, 4 Pin, 200-1800 RPM

  • Premium quiet fan, 120x120x25 mm, 12V, 4-pin PWM, max. 1500 RPM, max. 22.4 dB(A), >150,000 h MTTF.
  • Award-winning 120x25mm fan with Focused Flow frame for high static pressure and superior quiet cooling performance.
  • Ideal for CPU heatsinks (e.g. Noctua NH-U12(S) series) and water cooling radiators, perfect replacement fan for loud all-in-one (AIO) coolers.
  • 4-pin PWM version for automatic speed control via 4-pin PWM fan headers, broad 300-1500rpm speed range (1200rpm max. with supplied Low-Noise Adaptor).
  • Includes anti-vibration mounts, fan screws, Low-Noise Adaptor, extension cable and y-cable for running two PWM fans on the same header.
Check Stock