Reviews Eye Lag Screw

Bungee Brake Kit (20FT)

  • HEAVY DUTY BLOCK: Accepts cable up to 1/2" in diameter, includes heardware and rubber bumper for impact with trolley.
  • BUNGEE CORD: Superior quality 1/2" Bungee cord knotted on both ends come ready to install..
  • QUICKLINKS: 3/8" Quick Links connect looped ends of bungee to block on one end and tree or post on other end..
  • EYE LAG SCREW: 3/8" X 3 3/4" beefy screw sinks into tree bark or 4x4 anchor post. Also includes backup cable sling to secure in place..
  • INSTRUCTIONS: Complete Installation & Safety Handbook for entire zip line system, not just bungee brake..
Check Stock

Stainless Steel 316 Lag Screws Hex Head Lag Bolts 1/2 x 1-1/2 Qty 250

  • Stainless Steel 316 Lag Screws Hex Head Lag Bolts 1/2".
  • Commonly referred to as a lag screw or lag bolt.
  • Features the sharp cutting threads of a wood screw.
  • Commonly used in heavy duty carpentry applications including lumber framing and anchoring equipment to wood such as machinery and large vices.
  • 316 stainless steel is highly corrosion and rust resistant.
Check Stock

CONFAST 1/2\ (Inside/Screw 1/2\ - 13) Double Expansion Anchor (20 per Box)

  • Allows for lag screw bolts to be installed into concrete, brick and block.
  • Inserts into a hole by tapping with a hammer until flush.
  • Lag screw expands the lag shield against the walls of the hole.
  • Drill hole with masonry drill bit based on diameter on anchor.
Check Stock

Insaga 304 Stainless Steel Gate Hinges for Wooden Fences Heavy Duty, One-Piece Molding Screw Eye Hook for Wooden Farm Gate Hinge Bolts, Eye Hinges with Hole Dia 5/8'' to Adjust Gate Sag (Set of 2)

  • Premium Quality: Insaga Gate Hinges made of Anti-rust 304 stainless steel with non-welded one-piece products, with high load-bearing capacity and long lasting features, which is a is a good choice to install or replace gate post hinges on wooden fence or gate , adjust to correct gate sag..
  • Specification: The total length of Screw Eye is 4-1/2'' with diameter 5/8'' eye hole, and the thread length reach to 3'' for easy to tightening..
  • Usage: Can be freely matched with pintle 5/8'' Wood Post Lag Screw Hinge or Wall Plate Hinges ( Sold separately)..
  • Pls contact with us any time if you have any problems about our products, we will always be there to help..
Check Stock

Miers Labs NO Jet Lag Homeopathic Jet Lag Remedy (1 Pack, 32 Tablets) & Comfort Travel Eye Mask with Adjustable Straps Blocks Light, Improves Sleep Quality Travel Essential

  • A PERFECT PAIR: Taking both NO Jet Lag and our Travel Eye Mask on your travels will help solve those issues we all have when leaving home to go on holiday or work trips..
  • REDUCES JET LAG- After a long-haul flight, we all want to arrive feeling fresh and alert and with NO Jet Lag you can. With over 8 million packs sold across the world, this is a proven successful jet lag product. These are a travel essential and will help to alleviate body stress and fatigue due to disruptions in the body’s natural clock rhythm..
  • QUALITY TRAVEL MASK: If you travel a lot and find it difficult to get some shut-eye on the plane, using our sleeping mask will help you relax and block out everything around you so you can gradually drift off. If you have difficulty staying asleep due to bright city or street lights outside your window, or maybe even the early morning sunrise seeping through, then our soft padded eye mask can help prevent you from waking up..
  • TRAVELLER TESTED: No-Jet-Lag is a unique product, specially formulated and rigorously tested to alleviate jet lag. In the 1994 survey of international flight attendants, 75% of respondents said No-Jet-Lag was either good or very good in countering the effects of jet lag. Our mask has multiple benefits, as well as getting....
Check Stock

Hard-to-Find Fastener 014973269470 Lag Expansion Shields, 1/4 Short, Piece-12

  • Expansion shield anchors for use with lag screws are designed to anchor into concrete, brick, and block..
  • Expansion shield anchors consist of pre-assembled two-part expansion shields..
  • These anchors expand as a lag screw is fastened through the anchor..
  • These anchors feature very precise tapered internal threading to permit easy turning of the lag screw..
  • Zinc plating adds a layer of corrosion resistance to the anchors..
Check Stock

Muzata 20Pack 1/8\ Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 10 Pairs CK17

  • Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:10pcs left-hand lag screws,10pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we rec....
Check Stock

Hakkin 3/8 Hex Lag Bolts Wood Screws 60PCS Assorted Wood Screw & Bolt Assortment Sets 1-1/2 2 2-1/2 3 3-1/2 4 Hexagon Head Lag Bolts for Wood Decks Building,Industrial

  • 1.【Premiun Material ＆ Mighty Grip】Heavy duty screw bolts are made from 304 stainless steel and no exterior finish, greater strength and corrosion resistance performance than regular stianless steel or zinc plated fasteners.These lag bolts for wood is coarse threads for superior holding, will not strip off..
  • 2.【Standard and Various Sizes】The hex lag bolts kit includes 6 different most common used sizes:3/8×1-1/2"，3/8×2"，3/8×2-1/2",3/8×3",3/8×3-1/2",3/8×4".
  • Quantity: 60 pieces screws and washers in total (30 sets)..
  • 3.【Project Center】These stainless steel lag screws are great for exterior household securing wood works industrial applications such as deck building or joining lumber，and DIY design..
  • 4.【Choice for Heavy Duty Applications】These lag bolts are ideal used for securing wood in heavy duty applications that standard wood screws cannot support the load feature deep wood screw coarse threads for superior holding and prevent stripping in the material.
  • Can be applied in even severe environment. Often using with washer which distribute the pressure of the head evenly so that to prevent pull through..
  • 5.【Guarantee in Hakkin】Hakkin hex lag screws undergo rigorous ins....
Check Stock

Muzata 60Pack 1/8' Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 30 Pairs CK17

  • Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:30pcs left-hand lag screws,30pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we rec....
Check Stock

Muzata 20Pack 1/8' Black Swage Lag Screws Left & Right Black Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck NeatBlack System 10 Pairs CK17, CA7

  • Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:10pcs left-hand lag screws,10pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8″ swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4″ sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8″ cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, ....
Check Stock

1000LED 4 Inch Round Pole Bracket Tenon Adapter, Tenon Pole Bracket, Single Vertical Bracket Adapter for LED Street Light, Shoebox Light

  • ...sual effect according to different of occasion.String light hanging wire can present very good effects in outdoor and indoors..
  • 【Enough Accessories】This outdoor string light kit provide almost all of the kit you need, including 180 feet Stainless Steel 304 Cable.
  • 4 Pcs M5 Turnbuckle,4 Pcs Attached Snap Hook,4 Pcs Screw Eyes Lag Thread,8 Pcs Eye Straps,12 Pcs Adjustable Locking Device,16 Pcs Lag Screw,16Pcs Plastic anchors,130PCS Black Twist Ties,1*user manual..
  • 【Service Support】We are committed to providing customers with high quality products and comprehensive after-sales service.All accessories in globe string lights wire are reliable for long term and convenient uses and they are backed with a 100% money back guarantee.Whether it is product quality or usage problems,you can contact us at any time.we will reply within 24 hours,all guarantees the interests of customers are our aim..
Check Stock

#14 x 4\ Construction Lag Screw Exterior Coated Torx/Star Drive Heavy Duty Structural Lag Screw Far Superior to Common Lag Screws - Modified Truss Washer Head - Full Box - 500 Screw Count

  • Manufactured from High Quality Heat Treated Steel, Triple Coated, and ACQ Treated Lumber Compatible.
  • Corrosion Resistant Exterior Coated Screws Passed 1200 Hour Salt Spray Test Without Coating Failures.
  • .24 (#14) Thread Diameter, .508 Head Diameter Modified Truss Head Screw for Better Compression Force.
  • These Construction Lag Screws Far Exceed Standard Lag Bolts in Shear Compression Forces.
  • Excellent Screw for Decking, Fencing, Roofing, Framing, Timber Frame or Post, and Beam.
Check Stock

48 Pack Swage Lag Screws Left & Right for 1/8\ Cable Railing kit,T316 Stainless Steel Stair Deck Railing Wood Post of Cable Railing Kit, Decking Railing Hardware, DIY Baluster Kit

  • 【LEFT & RIGHT DESIGN】 With the Left hand lag screws and Right hand Lag Screws design, it can rotate wire rope in the same direction, which resolves the problem of twisting the wire rope. Products without Left & right design might damage the cable. The wrench multi-tool is handy, it will help you drill the lag screw into the wood easily..
  • 【PROTECTOR SLEEVES】 These stainless steel protector sleeves will prevent the wire cable from wearing into the post, and maintain the cable rail tension for preventing wire rope vibration..
  • 【COMPATIBILITY】 These Cable Railing Kits are suitable for 1/8" diameter wire rope cable railing system, perfect for DIY your own wood baluster post stair or decking railing project, good for indoor or outdoor applications..
  • 【HIGH-QUALITY 】 Made of premium stainless steel for weather-tough durability, super-strong resistance to rust and corrosion, low maintenance and lasting beauty..
  • 【WHAT YOU WILL GET】 The cable railing kit includes 30 PCS left handed thread swage lag screws, 30 PCS right handed thread swage lag screws, 80 PCS protector sleeves, 2 PCS drill bits (The 6.5mm drill bit is used for drilling the protector sleeves holes, and the 5mm drill bit is used for drilling the lag screws holes), 1 PCS wrench..
Check Stock