Reviews Extension For Metalworking

POWERTEC 110680 4 x 36 Inch Sanding Belts | 80 Grit Aluminum Oxide Sanding Belt | Premium Sandpaper – 10 Pack

  • Kit includes 1 each: P1000, P1200, P1500, and P5000 grit sanding belts (4 total).
  • Industrial quality metalworking material designed specifically for knife making | Closed coat | Heavy duty polyester cloth backing.
  • Precision engineered bi-directional tape joint | Anti-clogging stearate to reduce heat and buildup | Resin over resin bonding for long belt life.
  • Wet or dry applications | Ultra fine grits are ideal for sharpening, polishing, or ultra fine finishing of any surface | Great for general metalworking as well.
  • Factory direct | Hand built in usa by Red Label Abrasives | Money back guarantee.
Check Stock

Red Label Abrasives 2 X 42 Inch Knife Sharpening Sanding Belts – Ultra Fine Grits – 4 Pack Assortment

  • Kit includes 1 each: P1000, P1200, P1500, and P5000 grit sanding belts (4 total).
  • Industrial quality metalworking material designed specifically for knife making | Closed coat | Heavy duty polyester cloth backing.
  • Precision engineered bi-directional tape joint | Anti-clogging stearate to reduce heat and buildup | Resin over resin bonding for long belt life.
  • Wet or dry applications | Ultra fine grits are ideal for sharpening, polishing, or ultra fine finishing of any surface | Great for general metalworking as well.
  • Factory direct | Hand built in usa by Red Label Abrasives | Money back guarantee.
Check Stock

Red Label Abrasives 2 X 42 Inch Knife Sharpening Sanding Belts - Premium Ceramic - Coarse Grits - 6 Pack Assortment

  • Kit includes 1 each: P36, P40, P60, P80, P100, and P120 grit premium ceramic sanding belts (6 total).
  • Industrial quality metalworking material designed specifically for knife making | Closed coat | Heavy duty y-weight polyester cloth backing.
  • Precision engineered bi-directional tape joint | Anti-clogging stearate to reduce heat and buildup | Resin over resin bonding for long belt life.
  • Wet or dry applications | Unique properties of ceramic grain deliver outlast other types (zirconia, silicon carbide, aluminum oxide, etc.) | Great for general metalworking as well.
  • Factory direct | Hand built in usa by Red Label Abrasives | Money back guarantee.
Check Stock

6-Inch Cross-Slide Drill Press Vise X-Y Compound Vise 2 Way Heavy Duty Cross Slide Vise Clamp Machine Metal Milling

  • Material - This X-Y compound vise made of heavy duty cast iron construction, Powerful serrated steel jaws.
  • Size - 6" wide machinist jaws ,Maximum jaws opening: 5.9" , Jaw depth 2.08 inch.
  • Vice Travel X: 5.5inch Vice Travel Y: 7.48inch.cold rolled steel....
  • Usage - uyoyous cross slide vise have swivel crank handles for adjusting vise front to back and left to right, bolt down slots for securing..
  • Function - Hinged vise crank handles drops out of the way, designed for woodworking and metalworking..
  • Wide Application - our heavy duty cross slide vise designed for woodworking and metalworking, widely used in milling machine, drill press and....
Check Stock

Mixiflor 40Pcs Cone Shape Abrasive Sandpaper 1/4 Inch Shank Flap Wheels 80/120/180/240/320 Grits Aluminum Oxide for Removing Rust Deburring Polishin

  • MOST COMMON SHANK SIZE: The 1/4 shank makes these abrasive wheels suitable to be used as sanding wheels for electric drills, cordless drills, die....
  • METALWORKING APPLICATIONS: The mounted flap sanding wheels are commonly used in metalworking as a grinding or deburring wheel to clean up welds and....
  • WOODWORKING APPLICATIONS: Often used for flap sander wheels in woodworking for the stripping of old layers of paint when during resurfacing projects....
  • PREMIUM MATERIALS: High quality aluminum oxide coated abrasive cloth provides a solid and durable grinding power combined with high efficiency and....
  • YOU WILL GET: 6*15mm Cone Shape Abrasive Sandpapert - 5 Different Sanding sizes ‒ 8 pcs of each 80/120/180 /240/ 320 grits.
Check Stock

Genmitsu 4 Pack Hold Down Clamp Kit, CNC Router Clamp for Woodworking and Metalworking, 3-7/20''L x 4/5'' W x 2-7/10''H, Compatible with CNC Router Machine PROVerXL 4030 &3040 Extension Spoilboard

  • Feature: This clamp can be used on a T-Slot Aluminum Spoilboard, and also can be used on Threaded MDF Spoilboard with pre-installed threaded holes (4mm (0.16'')) . Compatible with Genmitsu PROVerXL 4030 CNC router kit, 3040 Extension Spoilboard, as well as other large CNC machines. Just make sure the size of T-Slots/ holes on your Spoilboard can be compatible with this clamp..
  • Dimensions: This clamp is 85mm length x 20mm width x 68mm height. (3-7/20''L x 4/5'' W x 2-7/10''H)..
  • Working range: This clamp accommodates material up to 35mm (1.38'') thick and holds it firmly in position. It can hold a variety of materials for desktop CNC router machines..
  • Sturdy Quality: Constructed of High Strength Cold Rolled Sheet for durability and wear resistance..
  • Versatility: This clamp provides exceptional clamping forces for your universal t-track system configurations and assemblies. It is ideal for work holding, positioning, and fixturing for woodworking or metalworking, including routers, drill presses, CNC, table saws, jigs, panels, vertical mills, and more..
Check Stock

BEAMNOVA Universal Metal Bender Set High Precision Benchtop Manual Rebar Scroll Wire Bending Machine for Copper Tube Iron Aluminum Steel Brass

  • MULTIPLE PURPOSE - BEAMNOVA universal metal bender is a multiple functional metal bending machine, which can be used to produce grids, doors, gates, balcony railing, patio furniture as well as wrought iron lamps..
  • BENDING DIFFERENT KINDS OF MATERIALS. - BEAMNOVA manual scroll bender is designed to cut different kinds of metal material, such as steel, brass, copper, aluminum, etc..
  • IDEAL FOR METALWORKING & REPAIR SHOPS - BEAMNOVA rebar bender is heavy-duty, but at the same time portable and easy to use, which makes it an ideal tool for repairs shop and metalworking shops..
  • GREAT BENDING CAPACITY - In terms of flat steel, BEAMNOVA metal bending machine can perform at 1.18” x 0.394” (30x10 mm).
  • as to round steel and square steel, it can bend 0.394”..
  • DURABLE DESIGN WITH EASY OPERATION - BEAMNOVA universal metal bender is assembled with heavy materials that can last for many year’s use. You can mount it onto a workbench or floor, increasing the flexibility of metal bending process..
Check Stock

5pcs High Speed Steel Center Drill Set, Center Drill Bits, Combined Drill, Countersink Lathe Mill Tool Set, HSS 60 Dgree 1.5/2/2.5/3/4mm for Lathe Machines & Remove Chips

  • ★【For Metalworking】These center drill bits are used in metalworking to provide a starting hole for a larger-sized drill bit..
  • ★【For Conical Indentation】They can also be used to make a conical indentation in the end of a workpiece in which to mount a lathe center..
  • ★【Material】Made from high speed steel, these center drill bits are of high hardness and good wear resistance.Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes..
  • ★【5 Sizes】There are total 5 pieces center bits in this set that can be used to drill holes in different sizes..
  • ★【Applications】Widely used on lathe machines, these center drill bits can cut easily and remove chips smoothly.Available for all Kinds of Materials: Metal, Alloy, Copper, Iron, Wood, Aluminum, and so on..
Check Stock

35 Pack 1/4 Abrasive Flap Wheel Sander Set WENORA 80 Grit Aluminum Oxide Flap Wheels Cylindrical Shape Sanding Wheel 7 Sizes

  • 【PREMIUM MATERIAL】 High quality aluminum oxide coated abrasive cloth provides a solid and durable grinding power combined with high efficiency and long life to give you that premium performance that you need and expect from your tools..
  • 【SHANK DESIGN UPGRADE 】 we upgraded the ordinary round shank to 1/4-Inch hex shank to improve the firmness at high speeds. Even in large-area heavy-duty machining, there will be no loosening or slipping..
  • 【METALWORKING APPLICATIONS】 The mounted flap sanding wheels are commonly used in metalworking as a grinding or deburring wheel to clean up welds and cuts in iron, stainless steel and metal alloys. Also used for removing layers of rust and paint on flat metal surfaces.
  • 【WOODWORKING APPLICATIONS】These abrasive wheels suitable to be used as sanding wheels for electric drills, cordless drills, die grinders and.for the stripping of old layers of paint when during resurfacing projects or sanding and finishing contoured wood surfaces..
  • 【VARIETY OF WHEEL SIZES】Our 35 piece set includes (5) 1” thick sanding wheels with 1/4” hex shank in each of the 7 different sizes.
  • 0.78", 1", 1.2", 1.58", 2", 2.36" and 3.14" widths.
Check Stock

Mixiflor 50 Pack Abrasive Flap Wheel Sande,1\ x 1\ x 1/4\ Shank Mounted Flap Wheels,80 Grit Aluminum Oxide for Remove Rust and Weld Burr,1/4 Shank Fits All Drills

  • MOST COMMON SHANK SIZE: The 1/4 shank makes these abrasive wheels suitable to be used as sanding wheels for electric drills, cordless drills, die grinders..
  • METALWORKING APPLICATIONS: The mounted flap sanding wheels are commonly used in metalworking as a grinding or deburring wheel to clean up welds and cuts in iron, stainless steel and metal alloys. Also used for removing layers of rust and paint on flat metal surfaces..
  • WOODWORKING APPLICATIONS: Often used for flap sander wheels in woodworking for the stripping of old layers of paint when during resurfacing projects or sanding and finishing contoured wood surfaces..
  • PREMIUM MATERIALS: High quality aluminum oxide coated abrasive cloth provides a solid and durable grinding power combined with high efficiency and long life to give you that premium performance that you need and expect from your tools..
  • VARIETY OF WHEEL SIZES: 50 Pack flap sanding wheels with 1/4 inch Shaft, 1 inch Thickness and 1 inch Outer Diameter..
Check Stock

S erounder Hold Down Clamp, Metal Quick Acting Hold Down Clamp Set for T-Slot T-Track Woodworking Tool(T Screw and Plastic Knob Nut Just)

  • ✔Scope of Applications：The T-slot clamp is ideal for fixing, positioning and fixing workpieces in many woodworking or metalworking applications, including planers, drilling machines, CNC, table saws, fixtures, panels, vertical milling machines, etc.
  • ✔Easy to Install：The hold-down clamp is easy to install, and the flush pressure is applied to any position along the flush-mounted t-slot t-shaped track. Slide into the t-shaped track and fasten it by turning the knob nut.
  • ✔Multifunctional Usage：This is a set of compression fixtures for t-slot rails. These t-track hold-down clamps can be used in many woodworking and metalworking applications for workpiece fixation, positioning and fixing.
  • ✔Premium Materials：Our t-track hold-down clamp is made of high-quality metal materials, sturdy and durable, and has a long service life. Exquisite craftsmanship and exquisite operation ensure its super durability.
  • ✔What You Get：You will receive 1 x whole clamps set (threaded rod, t screw, knob nut, slide block, washer, clamp board) or 1 x t screw and plastic knob nut just.For a better customer experience, we will optimize the product from time to time.
Check Stock

BUCKTOOL Dual Speed 1" x 42" Belt Disc Sander Combo, Bench Knife Sharpener with Large Work Table, Professional Benchtop Belt Sander with Direct-drive 4.8A Brushless Motor for Metalworking, BD1801DS

  • DUAL SPEED DIRECT DRIVEN MOTOR: 4.8A brushless induction motor can provide 1750 & 3450 RPM speeds for your different needs, 25% more sanding efficiency than belt-driven motor.
  • MAINTAINANCE FREE & EASY ASSEMBLE: Unlike other belt-driven motors that need yearly belt change, the brushless induction motor do not need maintenance, and you only need to install 2 work tables, then the bench belt sander will be ready to work.
  • MADE FOR METALWORKING: From work tables to the machine base, and even the belt frame and dust ports are made of metal, this benchtop belt disc sander is just born for metalworking like knife making and all metal polishing.
  • EASY BELT DISC CHANGE: The easy-remove belt cover and quick belt release system makes belt changes ever fast. Hoop & loop design sanding disc makes disc replacement super easy and does not need to use glue anymore.
  • MULTI-ANGLE SANDING: the work table for sanding disc can be adjusted from 0-45 degrees for your different angles sanding needs.
Check Stock

Hymnorq 3/8 Inch Fractional Size M35 Cobalt Steel Twist Drill Bit Set of 5pcs, Jobber Length and Straight Shank, Extremely Heat Resistant, Perfect Drilling in Stainless Steel and Cast Iron

  • COBALT STEEL - Manufactured from M35 grade cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, ideal for repeated drilling in metalworking..
  • FOR METALWORKING - Particularly successful in cutting through hard metals(hardness less than HRC38°) such as stainless steel and cast iron, although they can be used for softer materials like copper and aluminium, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate..
  • SELF CENTERING - The 135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. The bits will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks..
  • 5PC SET - The set includes 5pcs of 3/8” diameter M35 grade cobalt steel twist drill bits, packed in a convinient and reuseable PVC case for easy storage and carrying. Manufactured to German DIN338 standard..
  • DOWNLOADABLE USER GUIDE - We've summed up some tips of drilling metals, including a RPM chart for several common metals, based on our reviews and some articles on the internet. In most cases, our customers w....
Check Stock