Reviews Extension For Floor Drilling

WEN 4214 12-Inch Variable Speed Drill Press,Orange

  • Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed..
  • Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches.
  • Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III.
  • 9-1/2 x 9-1/2" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2".
  • Includes drill press, mechanical variable speed, laser, table roller extension, 5/8" keyed chuck & key, tools for assembly.Drill press Height from the Floor to the top: 37 inch.
Check Stock

AW 9.84 FT 45MM Spinning Static Dancing Pole Kit for Club Party Fitness Exercise

  • [Easy & Flexible Installation]: AW 9.84 ft extendable spinning dancing pole is easy to put up and take down, no-drilling and does no harm to your ceiling.
  • the height can be adjusted with 3 extension poles to accommodate different ceiling height from 7.35 to 9.84 ft.
  • [Durability & Strong Support]: Sturdy steel with chrome plated for durability and rust-resistance.
  • can load up to 1102 Lbs vertically and 617 Lbs horizontally, bears more weights than others in the market.
  • [Spinning or Static Modes]: Adjust the screw nuts on the bottom base to achieve the spinning or the static status, suitable for beginners to finish entry-level actions, or to achieve more professional and difficult poses.
  • [Safety & Stability]: High precision and seamless joints offers comfortable hand feeling and superior safety, which will not scratch your hands and give you excellent dancing experience.
  • bottom & top plate is protected by aprons to improve stability and protect the floor and ceiling.
  • [Wide Application]: This dancing pole is suitable for both beginners and professional dancers to do exercise, stage performance, teaching, ideal for using at home, stage, club, dance studio.
  • Overall Dimension (Extension Pole Included) (Dia.xH): 9 1/16" x 118 1/8".
Check Stock

Wood Drill Press Bores One Hole at Fast Speed

  • Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed..
  • Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches.
  • Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III.
  • 9-1/2 x 9-1/2" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2".
  • Includes drill press, mechanical variable speed, laser, table roller extension, 5/8" keyed chuck & key, tools for assembly.Drill press Height from the Floor to the top: 37 inch.
Check Stock

Wood Drill Press Bores One Hole at Fast Speed

  • Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed..
  • Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches.
  • Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III.
  • 9-1/2 x 9-1/2" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2".
  • Includes drill press, mechanical variable speed, laser, table roller extension, 5/8" keyed chuck & key, tools for assembly.Drill press Height from the Floor to the top: 37 inch.
Check Stock

THUNDERBAY Cyclone 120V Lithium Ice Auger (Powerhead w/8" Auger Bit and 18" Extension)…

  • 【Ice Auger Adapter and Extension】Hex head shaft Ice Auger Adapter fit in 1/2 inch drill chuck for Power Drill and adjustable in three different heights, about 14 inches in length. 0.79 inch inner Round Shaft black extension fit to Gas Powered Earth Auger , 12.6 inches in length. The Extension and adapter convert most hand ice augers to automatic mode, saving your fishing time..
  • 【High-Performance Drilling】8'' auger diameter, about 20'' drilling depth(without Extension length ), weight 5.4 lbs. Quietly, lite weight and easy to use. Comes with spare blades, Dual flat steel blades offer smooth cutting and breakthrough. Drills fast and with the center point it can overlap holes and helps keep the bit stable when starting..
  • 【High Quality】The Ice Auger, Auger extension and Ice fishing Auger Drill Adapter were all forged from heavy duty, welded steel and finished with a powder coat for Long-lasting use without rusting or damaging..
  • 【Safety Topper and Carry Bag】The safety topper is really a must to prevent the auger from going through the ice if it falls out of your drill chuck. Saved your auger from disappearing dow....
Check Stock

Drill, Press - Wood Drill Press: Bore One Hole, Fast Speed, Construction Drills - Electric

  • Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed..
  • Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches.
  • Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III.
  • 9-1/2 x 9-1/2" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2".
  • Includes drill press, mechanical variable speed, laser, table roller extension, 5/8" keyed chuck & key, tools for assembly.Drill press Height from the Floor to the top: 37 inch.
Check Stock

8 Inches Ice Fishing Auger with Extension - Ice Auger Drill Suitable for Gas Powered Earth Auger and Power Drill with Safety Disk, Replaceable Auger Blade

  • 【Ice Auger Adapter and Extension】Hex head shaft Ice Auger Adapter fit in 1/2 inch drill chuck for Power Drill and adjustable in three different heights, about 14 inches in length. 0.79 inch inner Round Shaft black extension fit to Gas Powered Earth Auger , 12.6 inches in length. The Extension and adapter convert most hand ice augers to automatic mode, saving your fishing time..
  • 【High-Performance Drilling】8'' auger diameter, about 20'' drilling depth(without Extension length ), weight 5.4 lbs. Quietly, lite weight and easy to use. Comes with spare blades, Dual flat steel blades offer smooth cutting and breakthrough. Drills fast and with the center point it can overlap holes and helps keep the bit stable when starting..
  • 【High Quality】The Ice Auger, Auger extension and Ice fishing Auger Drill Adapter were all forged from heavy duty, welded steel and finished with a powder coat for Long-lasting use without rusting or damaging..
  • 【Safety Topper and Carry Bag】The safety topper is really a must to prevent the auger from going through the ice if it falls out of your drill chuck. Saved your auger from disappearing dow....
Check Stock

AREAJD Projector Wall Mount Shelf No Drill, Projector Shelf, Projector Mount Wall Floating, Projector Wall Mount Shelf, Projector Holder, Projector Stand Wall White, Small

  • Fit for projectors below 10.4*6.8 inch. Max Load reach up 10lb..
  • No damage to wall. Two installation methods are available, seamless nail(No damage to the wall, no need to make holes) and drilling..
  • Away from the room looks tacky. This wall mount don't need long pole and extension cord, keep room pretty..
  • Usually lower installation costs. No need for specialized tools, Running through walls or ladders..
  • Save Room Space. you may save critical floor and table space by safely mounting your projector to the wall. Wall mounts are excellent for utilizing otherwise wasted wall space..
Check Stock

BOSCH Daredevil DSBE1012 12 In Drill Bit Extension

  • The item is Bosch Daredevil DSBE1012 12-inch drill bit extension.
  • Used for power tool accessories, drill bits & accessories.
  • Features a full cone threaded tip for fast and effortless drilling.
  • 1 4-inch hex drive extension for Bosch spade bits.
Check Stock

Drill Press Stand, for Drilling Collet Workshop,Single Hole Aluminum Base, Drilling Depth Up to 60mm, Adjustable, Quality Aluminum, Keep Drill Stable, for Shop or Home Use

  • ◆[New type adjustable]: This is a new type of adjustable drill floor, which is very suitable for store or home use..
  • ◆ [Usage range]: Designed for electric drills with a diameter of 43mm or 38mm (1.7 inches or 1.48 inches)..
  • ◆[Drilling Depth]: The maximum drilling depth is 60mm (2.4"), with 2 holes for installation.
  • ◆[Reinforced and stable base]: It has a solid column and a solid base, with slots for installing machine vise, making it more stable and safe to use..
  • ◆[Precise Drilling]: This thrust drill stand is an ideal choice to keep the drill bit stable during use, and can perform more precise drilling than handheld operations. (Excluding drill bits, flat-nose pliers, wood!).
Check Stock

ER32 Collet Holde Carbon Steel MT4 ER32 M16 Collet Chuck Tooling Holder CNC Milling Lathe Tool with Wrench

  • ER straight extension rod, long shaft, suitable for deep hole machining. Mainly used for various types of drilling and milling machine, spindle Morse taper machine..
  • Straight-type handle body for holding small drilling, milling tools..
  • You can reduce the use of longer tools, which can reduce costs and improve efficiency..
  • Stable diameter, other parts have been accurate ground to eliminate imbalance..
  • Mainly used for various types of drilling and milling machine, spindle Morse taper machine..
Check Stock

Machine Light,Led Work Light, 30W Folding Aluminum Alloy ong Arm Lamp for Lathe Milling Drill Press Industrial Lighting Reading,Cool and warm light available

  • Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed..
  • Spindle Travel of 3-1/8″ with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches.
  • Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III.
  • 9-1/2 x 9-1/2″ cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2″.
  • Includes drill press, mechanical variable speed, laser, table roller extension, 5/8″ keyed chuck & key, tools for assembly.Drill press Height from the Floor to the top: 37 inch.
Check Stock

Fiskars Extension for Hand Drill, For Holes up to Ø 200 mm, Silver, QuikDrill, L, 1000641

  • Replacement blades for hand drills for drilling burrows up to 200 millimetres in diameter, For planting flowers and perennials, Also suitable for aerating the soil and compost and for setting fence posts.
  • Clean drilling of the two blades into the ground, Will not get stuck to roots or small stones.
  • Easy attachment of the extension to the Fiskars Quikdrill hand drill, Can be combined with Fiskars Quikdrill hand drills 100 mm (item no.: 1000636) and 150 mm (item no.: 1000638) for drilling smaller holes.
  • Highly durable robust blades, Easy cleaning under running water, Finnish design.
  • Contents: 1x Fiskars QuikDrill PlusPart L, Size: L, Dimensions (H x L x D): 0.2 x 20 x 10 cm, Weight: 580 g, Material: Steel, Colour: Silver, 1000641.
Check Stock