Reviews Exhaust System Kit

Floshine 8PCS DIY Stainless Steel 2.25 Exhaust Pipe Kit,Including Mandrel Bend Pipe & U-Bend & Straight Pipe，Universal Fit 2.25 Inch Exhaust System

  • DIY Exhaust System--Four types of pipes totaling 16 pipes to meet your exhaust system renovation plans.
  • High-quality--Rust-proof steel and computerized mandrel bends deliver high strength and greater durability, and factory custom manufacturing provides stability and longer service life..
  • Products in the kit-- 2 pcs 90°Pipes, 2 pcs straight pipe exhaust kit, 2 pcs 135°Pipes， 2 pcs 180° U-Bends.
  • Easy to installation--Each pipe is extended in diameter at one end to facilitate sliding installation of different pipes.Installation can be done with clamps or by welding.
  • Fitment--Exhaust Pipe Bender Universal fit for modifying the exhaust pipe for the 2.5 inch exhaust system, 16 pipes can be interconnected and cut to create your own exhaust system.
Check Stock

SPELAB Electric Exhaust Cutout Valve 3.0 Inch 76mm Catback Single Y Pipe with One Controller Remote Kit…

  • One-Touch Loudness: 3.0 Inch Electric Exhaust Cutout Valve Kit fit for all types of vehicles. Note: please make sure you have enough space to install before purchase and make sure your exhaust size is 3.0 inch. Professional Installation is highly recommended. 3.0” Cut-out valve Kit included: 1 x 3.0” exhaust pipe cutout valve with motor, 1 x extension harness (Length: 3.5M), 1 x wireless remote control (without battery), and 1 x control box with cigarette lighter plug..
  • Function: This Cut Out Valve System Kit is specifically designed for single exhaust pipe and made to enhance the performance and power of your vehicle by remotely controlling of cutout valve. The faster the exhaust could be pushed out of the engine, the faster the combustion process could start over which give more horsepower. Aggressive deep sound while ensures smooth exhaust gas flow. SPELAB Butt Joint Exhaust Band Clamp is recommended for installation..
  • Cutout Valve: High-quality chrome-plated steel butterfly plate and valve pipe wall thickening process. You can turn on and off from the inside of the car by remote control. Turn off the switch, keep your original, peaceful exhaust system for comfortable. Turn on the switch, you can get aggressive deep sound. The opening angle of t....
Check Stock

PowerStroke Turbo Diesel Exhaust Manifold Bellowed Up Pipes Kit Compatible with Ford 1999-2003 7.3L 679-005 F-250 F-350 Super Duty

  • PowerStroke Turbo Diesel Exhaust Manifold Bellowed Up Pipes Kit  ---Replace the factory exhaust feed system (exhaust manifold to the turbocharger)....
  • Turbocharger Up Pipe Kit Works fit for Ford 7.3L powerstroke turbo V8 diesel models only! Such as: 1999 2000 2001 2002 2003( for Ford )F-250 Super....
  • Function - Direct replacement, Turbocharger Up Pipe Kit replaces the vehicle's factory installed exhaust manifold,Rust-resistant for long-lasting....
  • OE#:  679-005,F4TZ6K854C, F4TZ6K854F, F81Z6K854EA, F81Z6K854FA, F81Z6N632AA, F8TZ6K854AA.
  • include - 1 x Set of Turbo Diesel Exhaust Up Pipe All....
  • IMPORTANT NOTE - This Turbocharger Up Pipe Kit is designed to replace an original Turbocharger Up Pipe Kit with these exact options. If you do not....
Check Stock

NICECNC Black Exhaust System Muffler Pipe Compatible with 4 Stroke GY6 50cc Engines Scooters GY6 50cc 139QMB QMB139 1P39QMB Scooter Moped

  • Condition:100% Brand New AFTERMARKET PARTS,This is a great Performance up-grade when installing a big bore kit or a great replacement exhaust for a broken stock exhaust system..
  • Chinese Scooter Parts Gy6, 139QMB, 1P39QMB,50cc Chinese Scooter Performance Exhaust System 4 Stroke.
  • Performance Exhaust System Fits 50cc 4 Stroke Chinese Scooters GY6 50cc, QMB139 50cc Based Chinese Scooter Engines.
  • Fitment:Fits Most GY6-Style 50cc Engines.
Check Stock

Speedway Motors Pickup Truck Mild Steel Mandrel Bend Dual Exhaust Pipe Kit, 2-1/2

  • Cut out the middle man and build the perfect automotive exhaust system your project deserves!.
  • Universal kit includes all the necessary 2-1/2″ exhaust pipe bends and straights to allow you to run your own custom exhaust system.
  • Mild steel exhaust pipes feature a natural, anti-rust coating for corrosion prevention.
  • Includes 4 each: 45 degree bends, 90 degree bends, 180 degree bends.
  • plus 6 46″ inch straight pipe exhaust lengths.
  • Each 2-1/2″ smooth mandrel bent tube is expanded on one end to allow easy slip-fit installation.
Check Stock

Exhaust Flange, 2inch Universal Flat Oval Split Exhaust Flange Connection Repair Kit Low Carbon Steel Exhaust Downpipe Flange Replacement Accessory

  • Function: This 2-inch flat elliptical exhaust flange provides an effective fixing solution for the exhaust system, removing the intercooler system and turbine parts, such as charging pipes, intake pipes, diesel engines, turbochargers Compressor and heavy-duty exhaust system, etc..
  • Practical Exhaust Flange Repair Kit: The diameter of the center hole of this product is about 2 inches, and the oval bolt hole is about 2 inches. It has the characteristics of fine workmanship, high precision, high sensitivity, practicality and reliability..
  • Great Quality Low Carbon Steel Material: Our exhaust flange is made of high-quality low-carbon steel, which can ensure high hardness, rust resistance, effectively provide services while ensuring long-term use, and has good practicability..
  • High Precision: Our exhaust flanges are produced in strict accordance with the process, and each part is precision processed to achieve precise tolerances to achieve trouble-free performance. Old or damaged adapters can be replaced directly. Please rest assured to buy..
  • Easy Installation: This exhaust flange can be used without welding or cutting the exhaust pipe, just connect it to the flared pipe, and then bolt it to the existing flange you need to connect That's it, the installation st....
Check Stock

Vance & Hines Replacement Baffle for Straightshot Performance Exhaust Systems 21877

  • Typically Reduce Sound Output by 2-3 db,Nice Aftermarket Replacement.
  • Dimension:7.75*2.1 Inch (Length*OD*),Pls Confirm the Inner Diameter of your Exhaust Pipe before Purchasing, Note: Not Fit for 2009 FXSTSSE.This Quiet Baffle is Hand-made and Wrapped in the Middle Part,pls Allow Minor Differences of the Measurement.
  • Quiet Baffle is Wraped by Silencer Cotton+Aluminum Foil ,it can be directly used on your bike,No Mounting Bolts Included.
  • Notes: It is recommended that new exhaust gaskets and a proper jet kit be installed when changing an exhaust system on a carburated motorcycle, or new exhaust gaskets and a digital fuel processor when changing an exhaust system on a fuel-injected motorcycle. Discoloration (bluing) is caused by tuning characteristics, like cam timing, carb jetting, etc., and is not caused by defective manufacturing..
Check Stock

YHMTIVTU 2.1\ Quiet Baffle Exhaust Pipe Muffler Silencer Universal Fit for Motorcycles 1 Pair

  • Typically Reduce Sound Output by 2-3 db,Nice Aftermarket Replacement.
  • Dimension:7.75*2.1 Inch (Length*OD*),Pls Confirm the Inner Diameter of your Exhaust Pipe before Purchasing, Note: Not Fit for 2009 FXSTSSE.This Quiet Baffle is Hand-made and Wrapped in the Middle Part,pls Allow Minor Differences of the Measurement.
  • Quiet Baffle is Wraped by Silencer Cotton+Aluminum Foil ,it can be directly used on your bike,No Mounting Bolts Included.
  • Notes: It is recommended that new exhaust gaskets and a proper jet kit be installed when changing an exhaust system on a carburated motorcycle, or new exhaust gaskets and a digital fuel processor when changing an exhaust system on a fuel-injected motorcycle. Discoloration (bluing) is caused by tuning characteristics, like cam timing, carb jetting, etc., and is not caused by defective manufacturing..
Check Stock

Orion Motor Tech Exhaust Manifold Bellowed Up Pipe Kit Compatible with 99-03 Ford 7.3L Powerstroke Turbo V8 Diesel Performance F250 F350 Super Duty Excursion E350| 1999 2000 2001 2002 2003

  • Bellowed Up Pipes 7.3 ----- Replace the factory exhaust feed system (exhaust manifold to the turbocharger) which is prone to leakage due to the....
  • Replace Part # ----- 679-005, F81Z-6K854-EA, F81Z-6K854-DA, F81Z6K854EA, F81Z6K854DA on various 1999-2003 | 99 00 01 02 03 Ford 7.3L Powerstroke Turbo....
  • Fits These Vehicles ----- Works on Ford 7.3L powerstroke turbo V8 diesel models only! Such as: 1999 2000 2001 2002 2003 Ford F-250 Super Duty 7.3L,....
  • OEM Fit, Quality, Finish ----- This exhaust manifold pipe kit has gone through rigorous test for perfect fit and function that exceeds OEM....
  • All-in-one Kit ----- Includes everything you need for a fast & effective replacement of bellowed up pipes on the factory exhaust feed system, comes....
Check Stock

Universal 2.5 Inch Custom Tubing Mandrel Bend Pipe Straight & U-Bend Kit

  • Cut out the middle man and build the perfect automotive exhaust system your project deserves!.
  • Universal kit includes all the necessary 2-1/2″ exhaust pipe bends and straights to allow you to run your own custom exhaust systems.
  • Mild steel exhaust pipes feature a natural, anti-rust coating for corrosion prevention.
  • Includes 4 each: 45 degree bends, 90 degree bends, 180 degree bends, and 46″ inch straight pipe exhaust lengths.
  • Each 2-1/2″ smooth mandrel bent tube is expanded on one end to allow easy slip-fit installation.
Check Stock

RJWC Can Am Renegade XMR Centered Dual Slip On Exhaust

  • Designed to improve Performance by reducing back pressure in the stock exhaust system..
  • Fits: Artic Cat/Kawasaki/Suzuki (check description for years/models).
  • Brand: Krator | Each kit includes a billet exhaust tip, stainless steel screen and screws for easy installation.
Check Stock

Hydrofarm HGNP 30ml Nutrient Pump, 30 ml

  • Use this light system cooling kit along with 4-feet aluminum Dryer Ducting to exhaust heat and cool your growing are in warm climates.
  • Fits Powerhouse (all), Daystar (DAUN), Radiant, Xtrasun (XT1AC) and Sunburst.
  • Kit includes two exhaustfan Flanges, one vent cover, three mounting screw packs, one 20-feet self-adhesive weather-strip.
  • You can also use vent covers to Block unused ports.
  • This method can be used for a single stand-alone light to simply exhaust warm air.
Check Stock

Custom Header Exhaust Kit Generator Fits HONDA GX390 GO KART MiniBike Drift Trike

  • Custom header exhaust kit for use on Honda GX390 engines. Great start for those that want to construct their own exhaust system for generators, go karts, mini bikes. Kit includes mandrel bent 90 degree 1 1/4" tube with 3.5" radius, cnc cut 1/4" thick flange, and stainless steel replacement mounting hardware..
Check Stock