Reviews Exhaust Mufflers With Baffles

Delkevic Aftermarket Slip On compatible with Honda CBR600 F4i (2001-2006) with DS70 9" Carbon Fiber Oval Muffler

  • Delkevic DS70 9" carbon fiber oval mufflers are made from a pre-formed carbon fiber composite sleeve and 304 stainless steel. This muffler is loud and aggressive with or without the baffles installed..
  • This set includes all necessary hardware to mount the muffler onto the engine..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Full 3-1 Exhaust compatible with Yamaha FZ-09 MT-09 XSR900 DS70 9" Carbon Fiber Oval Muffler 14-20

  • FZ-09 (2014-2017) MT-09 (2018-2020) XSR900 (2016-2020).
  • Delkevic DS70 9" carbon fiber oval mufflers are made from a pre-formed carbon fiber composite sleeve and 304 stainless steel. This muffler is loud and aggressive with or without the baffles installed..
  • This set includes all necessary hardware to mount the muffler onto the engine. Gaskets are included..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Speedway 2.5" Mild Steel DIY Custom Mandrel Exhaust Pipe Bend Kit w/Mufflers

  • Premium 16-gauge steel construction of both tubing and mufflers to provide long lasting performance.
  • Each tube is expanded on one end to allow easy slip fit installation.
  • 2.5" mandrel bent tubing is full size throughout the bend for maximum flow and increased power.
  • Two chamber mufflers with twin baffles to reduce drone and interior noise while maintaining a deep powerful tone.
  • Mufflers are offset inlet and center outlet configuration to fit a variety of muscle car and hot rod applications.
Check Stock

Speedway 2.25" Mild Steel DIY Custom Mandrel Exhaust Pipe Bend Kit w/Mufflers

  • Premium 16-gauge steel construction of both tubing and mufflers to provide long lasting performance.
  • Each tube is expanded on one end to allow easy slip fit installation.
  • 2-1/4" mandrel bent tubing is full size throughout the bend for maximum flow and increased power.
  • Two chamber mufflers with twin baffles to reduce drone and interior noise while maintaining a deep powerful tone.
  • Mufflers are offset inlet and center outlet configuration to fit a variety of muscle car and hot rod applications.
Check Stock

3 Inch 2 x Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

  • Universal butt joint band 3.0" exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes..
  • Universal butt joint exhaust clamp fit for 3.0" OD pipe to 3.0" OD pipe, mufflers ect. quickly connect the exhaust pipe, removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Stainless steel clamp with great performance in anti-corrosion Stainless steel clamp with great performance in anti-corrosion.
Check Stock

Permatex 80334 1000 Degree Plus Exhaust Repair Kit, Single Unit

  • Permatex 1000 Plus, Exhaust Repair Kit With Bandage And Support Wire, Complete Kit For Repairing Cracks In Mufflers, Tailpipes And Exhaust Pipes.
  • These Are Complete Line Of Heavy-Duty Shop Products.
  • Through Creativity, Productivity And Innovation - This Brand Continues To Develop The Finest Automotive Accessories.
  • Complete kit for repairing cracks and splits in mufflers, tailpipes and exhaust pipes.
  • Kit contains ready-to-use foil-packed bandage and support wire.
Check Stock

WONGWAI 4 PCS 2.5 Inch 2 1/2 Butt Joint Exhaust Band Clamp Sleeve, Stainless Steel Exhaust Clamp for Exhausts, Mufflers, Downpipes

  • ...hey can give a good performance in the exhaust systems, and high quality in durability and reliability..
  • PERFECT SEALING CAPABILITY - These butt joint exhaust band clamps have been adopted high-strength fastening parts, providing the real leakage-free sealing capability. It is perfect for 2.5 inches exhaust pipes or mufflers..
  • 360 DEGREE FULL CLAMPING - Designed with an entire 360-degree full clamping area, the stainless steel exhaust clamp has an overall 360-degree clamping force without distorting exhaust pipe, muffler, or exhaust tubing in the exhaust system..
  • WIDE APPLICATIONS - These butt joint band clamps have removable and reusable bolts and nuts, which makes them durable and sturdy. They can be easily installed accurately without welding. They are suitable for exhausts, mufflers, downpipes, headers and manifolds..
  • MONEYBACK GUARANTEE - WONGWAI promises to provide you with a refund if you find any issue with our products in 30 days so that you can rest assured that you make the right choice. If you have any questions regarding our butt joint exhaust band clamp sleeve, please feel free to contact us, and we will make sure to provide the best service..
Check Stock

SEUNMUK 4 Pack 2.5 Inches Exhaust Clamp Sleeve, Stainless Steel Butt Joint Band Clamp Exhaust Coupler Exhaust Band Clamp Sleeve for 2.5-Inch OD Exhaust Pipes, Mufflers

  • ROBUST CONSTRUCTION - The stainless steel exhaust clamp is high-quality 304 stainless steel material, well polished with smooth mirror finish and high strength, which is solid and durable to last and can be reused for a long time..
  • EASY TO JOINT - No welding design, the joint exhaust band clamp features a practical components including bolts, nuts and I-block, you can easily mount or disassemble them, and you can also wrap some exhaust heat tape to enhance complete sealing..
  • TIGHT SEALING - Uniform distribution of clamping force will not crush the pipeline, which can provide tight seal and keep off exhaust and noise leakage. The exhaust band clamp sleeve can close fit on the exhaust pipes or mufflers..
  • PRACTICAL AND MULTIPURPOSE - 4 packs of joint exhaust muffler clamps is designed with 2.5-inch diameter and 3 inches length, which fits for exhaust pipes or mufflers, manifolds, catalytic converters of that with an outer diameter of 2.5 inches..
  • SATISFACTORY SHOPPING EXPERIENCE - If you have any dissatisfaction with exhaust clamp 2.5 inch, you will get a full refund within 30 days. If you have any questions about the product, please feel free to contact us, we will provide you with a satisfactory solution..
Check Stock

Dynomax 36409 Exhaust System Hanger

  • KEEPS EXHAUST PARTS IN PLACE -- Designed to support undercar exhaust components.
  • OE DESIGN -- Designed with OE-style features (where applicable) for easy installation.
  • AVAILABLE IN DIFFERENT SIZES -- Offered in a variety of styles and sizes for a quality vehicle repair.
  • PREMIUM MATERIALS -- Made from quality steel for durability and long life.
  • BETTER TOGETHER -- Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade.
Check Stock

Dynomax 36367 Exhaust System Hanger

  • KEEPS EXHAUST PARTS IN PLACE -- Designed to support undercar exhaust components.
  • OE DESIGN -- Designed with OE-style features (where applicable) for easy installation.
  • AVAILABLE IN DIFFERENT SIZES -- Offered in a variety of styles and sizes for a quality vehicle repair.
  • PREMIUM MATERIALS -- Made from quality steel for durability and long life.
  • BETTER TOGETHER -- Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade.
Check Stock

J-B Weld MufflerSeal Muffler Cement Plastic Tube 12 oz., Model Number: 37912

  • J-B Weld Muffler Seal: MufflerSeal is an iron reinforced paste designed to seal mufflers, pipe joints and exhaust systems. MufflerSeal can resists up to 700 F..
  • Cure Process: MufflerSeal can cure in two ways: By allowing the product to fully harden after it has been applied which can take up to 24 hours (time may vary based on cold or humid work environments) or MufflerSeal can be cured through heat application. You will be able to tell when the product is cured once it is hard..
  • Projects: Mufflers, Pipe Joints and Exhaust Systems..
Check Stock

Firman Generator Exhaust Extension Kit

  • Fits mufflers with No.68 & 88 spark arrestor screen - OR- 1-1/2" to 1-3/4" apart, spark arrestor hole spacing..
  • The exhaust adapter bolts onto the generator's stock muffler. Remove the existing spark arrestor and bolt to muffler outlet, re-using original bolts..
  • Changes tone of exhaust noise, for more noise reduction purchase a Zombiebox Noise Barrier.
  • Firman compatible Generator exhaust extension WITH MUFFLER allows for safe venting of exhaust fumes from an enclosure.
  • Find complete noise enclosures and solutions from Zombiebox on the web.
Check Stock

Borla 140496 Cat-Back Exhaust System

  • Full stainless steel exhaust for maximum durability and corrosion resistance.
  • Custom mufflers tuned to generate the highest quality exhaust tone possible.
  • Straight through exhaust system to maximize exhaust flow and minimize backpressure to boost performance.
  • Full system is back up by a million mile warranty. 2.50inches diameter front pipe, 2.00inches diameter split-rea pipes.
Check Stock