Reviews Exhaust Manifold Paint 2

Exhaust Manifold Bolt Repair Kit Compatible with GM Trucks & SUV's（1999 & Newer ）With a 4.8, 5.3, 6.0 or 6.2 L

  • No need to remove broken bolts, The exhaust manifold bolt repair kit will repair the exhaust leak without having to remove the cylinder head or drill out and replace the broken end bolts.
  • Install this part is to repair the driver's side front or the passenger side rear corner broken exhaust manifold bolts.
  • Exhaust manifold repair kit compatible with Trucks & SUV's (1999 & Newer) With a 4.8, 5.3, 6.0 or 6.2 L.engine size..
  • Material: Exhaust manifold repair brackets made of carbon steel, exhaust manifold bolt repair brackets will not fail like the bolts do from heat and expansion of the manifold.
  • We value your shopping experience, If you encounter any problems in installing the exhaust manifold stud repair kit, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

KBS Coatings 65328 Pure White Xtreme Temperature Coating - 1 Pint

  • Withstands Continuous Temperature of up to 1500°F.
  • Outstanding Heat & Weathering Resistance.
  • Resists Rust when primed with XTC Primer.
  • Surfaces: header paint muffler paint exhaust manifold paint BBQ grill paint paint for wood stove high heat paint stove wood burning stove paint cast iron stove paint high temperature stove paint pellet stove paint stove pipe paint.
Check Stock

Remflex 3003 Exhaust Gasket for Ford V8 Engine, (Set of 2)

  • 1-1/8 inch width x 1-1/2" height Stock Square Port.
  • Ford V8 - 302 ('81-'95), 351 ('69-'97) Windsor, 1-1/8" x 1-1/2" Square Port, Manifold or Headers, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

MBRP Exhaust S5001409 Muffler Bypass Fits 14-21 Compatible with/Replacement for Sierra 1500 Silverado 1500

  • ...EASE NOTE ON 2013 AND NEWER 4.8L, 5.3L OR 6.2L ENGINES ONLY, this will fit these motor sizes in years 2013 and newer if the oil dipstick tube is located on the passenger side of your vehicle. and it will fit any year 1999 to current models if you have a 6.0L engine in your vehicle because there is only one style of manifold for the 6.0L engine.
  • ▲ - 100% brand new and high quality, It is easy to install and uses high-quality materials that meet or exceed OEM standards. Exhaust manifold repair brackets made of carbon steel, exhaust manifold bolt repair brackets will not fail like the bolts do from heat and expansion of the manifold.
  • ▲ - The Exhaust Manifold Bolt Repair Bracket is to stop exhaust leaks that occur between the exhaust manifold and the cylinder head..
  • ▲ - If you have any questions, please feel free to contact us, we will serve you wholeheartedly. If you're not 100% satisfied with our tools, simply return it for a full refund in 30 days..
Check Stock

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

  • Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

A-Premium Left Exhaust Manifold Kit with Gasket Compatible with Nissan Frontier 2005-2019 Pathfinder 2005-2012 NV1500 NV2500 NV3500 2012-2021 Xterra 4.0L

  • 【Vehicle Fitment】This Exhaust Manifold Kit is Compatible with Nissan Frontier 2005-2019, NV1500/NV2500/NV3500 2012-2021, Pathfinder 2005-2012, Xterra 2005-2015---V6 4.0L.
  • 【Durable Construction】This exhaust manifold set is made of solid metal which can resist heat, cold, warping and corrosion, and restore engine proper operation.
  • 【Reference Number】The A-Premium Exhaust Manifold Kit's reference number: 674-947, 674947, 14002EA210, 14002EA21A. Before placing an order, verify that the part is compatible with your vehicle using the compatibility system..
  • 【Customer Support】1 Year Unlimited-mileage Quality Guarantee.
  • With being sturdy and brand-new, this exhaust long tube headers is the ideal replacement. Please get in touch with us at any time if the product has any quality issues, such as damage or isn't appropriate for your automobile..
Check Stock

SPEEDER Exhaust and Intake Manifold Stud Bolt Nut Gaskets Kit Stainless Extended M8 1.25MM*50MM Compatible with Honda Acura B D H F B18 GSR 20Pcs

  • Exhaust manifold Stud Bolt Nut Gaskets Kit is designed compatible with Honda Acura B, C, D, F, H series engines. also works for the intake manifold.
  • You can also remove the gasket (exhaust manifold stud designed compatible with Ford 4.6 & 5.4 Liter V8 Engine).
  • Standard 304 stainless steel studs and serrated flange nuts kit is great replacement for your orginial stud and bolt that are rusted and broken.
  • Exhaust manifold stud nuts kit thread size, M8*1.25MM, also fit other vehicle, such as Chevrolet, GMC, Dodge and so on. Please Check and measure the lengths(50mm) and thread sizes(M8*1.25MM) needed for your specific vehicle application.
  • The exhaust manifold bolts and studs kit has been heat-treated for enhancing its stable performance and durability. All parts are engineered and tested to meet or exceed original standards and performance.
  • We value your shopping experience, If you encounter any problems in installing the exhaust manifold stud bolt nut kit, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

Remflex 8002 Universal Exhaust Gasket, (Set of 2)

  • Universal 3” Collector Flange, 3 Bolt Holes, 3-3/8" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Exhaust Manifold Bolt Repair Kit Compatible with 1999 & Newer GM Trucks and SUV's With a 4.8L, 5.3L, 6.0L & 6.2L LS Engines (Driver Front/Passenger Side-Rear)

  • ... 【Special Tips】2013 AND NEWER 4.8L, 5.3L OR 6.2L ENGINES ONLY, this will fit these motor sizes in years 2013 and newer if the oil dipstick tube is located on the passenger side of your vehicle. If you have a 6.0L engine in your vehicle it will fit 100% (1999 and newer) as there is only one manifold style for the 6.0L engine..
  • 【Function and Role 】Install this part is to repair the driver's side front or the passenger side rear corner broken exhaust manifold bolts. Stops exhaust leaks that occur between the exhaust manifold and the cylinder head. Make your driving quieter..
  • 【High-Quality Materials】 Exhaust manifold repair brackets made of High quality carbon steel, up to OEM standard.TIG welding for durablity and long service time.exhaust manifold bolt repair brackets will not fail like the bolts do from heat and expansion of the manifold.
  • 【After-sales service】Confidence originates from quality! We promise to provide one free return/exchange within 30 days. Provide customers with a truly risk-free shopping experience. If you have any problem, feel free to contact us..
Check Stock

Remflex 2006 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • 1-3/8 inch width x 1-1/2 inch width Square Port - Matches the Stock cast iron Head Port.
  • Chevy V8 - SB 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, Stock Port, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1404.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Check Stock

Exhaust Manifold Gasket Spring Rebuild Kit with Clamp for Polaris Ranger RZR 800 2008-2010 Replaces 3610047 7041687 7041804 5811511

  • 【Top quality materials】Made of high temperature resistant graphene material. Strong airtightness, can withstand 800-1000 degrees, more durable than the original..
  • 【Why need to replace】Extreme temperatures, oil and coolant contamination, and constant exhaust blockage can wear out gaskets and cause leaks between the cylinder head and manifold..
  • 【Fitment】Replacement for P-olaris Ranger 700 (Does NOT fit Crew or 6x6) 2009.
  • For P-olaris Ranger 800 Full Size (Including Crew) 2010-2012.
  • 【Replaces part number 】3610047, 5811511, 7041687, 5250091 7041789.
  • 【Package includes】2 exhaust manifold gasket, 3 Exhaust Gasket Seal, 9 Exhaust Spring.
Check Stock

Remflex 2008 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - 4.8L, 5.3L, 6.0L LS2 ('99-'08), 5.7L, LS1 LS6 ('97-'08), includes Vortec, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1440.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock