Reviews Exhaust Kits

SUPERFASTRACING 2.25 T304 Stainless Steel DIY Custom Mandrel Exhaust Pipe Straight & Bend Kit

  • 2.5" Mild Steel DIY Custom Mandrel Exhaust Pipe Straight & Bend Kit.
  • These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it..
  • Each pipe is expanded on one end to allow easy installation..
Check Stock

Flanged Hex Head Bolts, Flange Bolts, Exhaust Manifold Bolt Kit M10X1.5-35mm 6-Pack

  • Aftermarket 03423 Exhaust Manifold Hardware Kit.
  • Stainless Steel construction provides strength and offers good.
  • The bolt kits are ideal for securing exhaust components and eliminating exhaust leaks.
  • Fits some Toyota,BWM,Lexus,Chevrolet models.Please check the size before purchasing.
Check Stock

3 Inches OD DIY Custom Exhaust Pipe Kit 16-Piecese Straight & 45/90 Degree & U-Bends

  • ▶️ These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end....
  • ▶️ Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability.
  • ▶️ i.e. Maximizing Smoothest High Exhaust Air Flow Rate.
  • ▶️ Slip Fit Joints to Provide Easiest Fabrication.
  • ▶️ 16-Gauge Piping Walls, Inlet / Outlet Size (IN) : 3" OD.
Check Stock

Ingersoll Rand 308B Air Straight Die Grinder, 1/4\

  • POWER: Motor delivers 0.33 HP (0.25 kW) and 25,000 rpm free speed..
  • Piped Away Exhaust Ready: These die grinders are compatible with “piped away” exhaust kits, so you can transfer exhaust away from you and your workspace..
  • DURABLE: Ball-bearing construction improves balance, reduces vibration, and ensures a longer life.
  • RELIABILITY: Integral safety-lock throttle lever prevents accidental start up..
  • LIGHTWEIGHT: At only 1lb., the ergonomic composite housing protects this tool from cold air and offers greater operator comfort..
  • Built-in lubricating wick increases angle gear life.
  • Rear exhaust directs air away from the operator.
  • Powerful motor delivers 0.33 HP (0.25 kW) and 25,000 rpm free speed.
  • Durable ball-bearing construction improves balance, reduces vibration, and ensures a longer life.
  • Strong aluminum housing withstands tough operating conditions.
  • Small and lightweight design provides easy operation greater access to tight spots.
  • Easy-to-use, integral safety-lock throttle lever prevents accidental start up.
Check Stock

Mid Valley - 3'OD DIY Custom Exhaust Tubing Mandrel Bend Pipe Straight & U-bend Kit Set of 16

  • These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end to allow easy installation..
  • Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, i.e. Maximizing Smoothest High Exhaust Air Flow Rate.
  • Package Included 4 x 48″ Straight Pipes 4 x 90 Degree Pipes 4 x 45 Degree Pipes 4 x 180 Degree U-Bends As our pics shown.
Check Stock

Krator 2.5" Mild Steel DIY Custom Mandrel Exhaust Pipe Straight & Bend Kit - 48" Straight, 90 Degree, 45 Degree, 180 Degree U-Bends Pipes

  • 2.5" Mild Steel DIY Custom Mandrel Exhaust Pipe Straight & Bend Kit.
  • These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it..
  • Each pipe is expanded on one end to allow easy installation..
Check Stock

3'' Custom Exhaust Kit Universal Mild Steel 16PCS Tubing Mandrel Bend Pipe Straight & U-Bend (2 PACKAGES SHIPPING))

  • Specification: 16-Gauge Piping Walls, Inlet / Outlet Size (IN) : 3″ OD.
  • Easy To Use: Slip Fit Joints to Provide Easiest Fabrication.
  • Universal Kit: 4 pcs 48″ Straight Pipes, 4 pcs 90 Degree Pipes, 4 pcs 45 Degree Pipes, 4 pcs 180 Degree U-Bends.
  • Sturdy Structure: Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, i.e. Maximizing Smoothest High Exhaust Air Flow Rate.
  • DIY Custom: These Exhaust Bend Kits Include Enough Tubing To Allow You To Run Your Own Exhaust System The Way You Want It.
Check Stock

DNA MOTORING ZTL-30RAW 16 Pcs 3 Inches Mild Steel DIY Custom Mandrel Exhaust Pipe Straight & U Bend Tube Kit,Universal Fit

  • Specification: 16-Gauge Piping Walls, Inlet / Outlet Size (IN) : 3″ OD.
  • Easy To Use: Slip Fit Joints to Provide Easiest Fabrication.
  • Universal Kit: 4 pcs 48″ Straight Pipes, 4 pcs 90 Degree Pipes, 4 pcs 45 Degree Pipes, 4 pcs 180 Degree U-Bends.
  • Sturdy Structure: Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, i.e. Maximizing Smoothest High Exhaust Air Flow Rate.
  • DIY Custom: These Exhaust Bend Kits Include Enough Tubing To Allow You To Run Your Own Exhaust System The Way You Want It.
Check Stock

DNA Motoring ZTL-25SS 16 Pcs 2.5 Inches Stainless Steel DIY Custom Exhaust Tubing Mandrel Bend Pipe Straight & U-Bend Kit, Universal Fit

  • Easy To Use: Slip Fit Joints to Provide Easiest Fabrication.
  • Universal Kit: 4 pcs 48" Straight Pipes, 4 pcs 90 Degree Pipes, 4 pcs 45 Degree Pipes, 4 pcs 180 Degree U-Bends.
  • Sturdy Structure: Made of High Quality Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
  • i.e. Maximizing Smoothest High Exhaust Air Flow Rate.
  • DIY Custom: These Exhaust Bend Kits Include Enough Tubing To Allow You To Run Your Own Exhaust System The Way You Want It.
Check Stock

DNA Motoring ZTL-25RAW 16 Pcs 2.5 Inches Mild Steel DIY Custom Exhaust Tubing Mandrel Bend Pipe Straight & U-Bend Kit, Universal Fit

  • Specification: 18-Gauge Piping Walls, Inlet / Outlet Size (IN) : 2.5" OD.
  • Easy To Use: Slip Fit Joints to Provide Easiest Fabrication.
  • Universal Kit: 4 pcs 48" Straight Pipes, 4 pcs 90 Degree Pipes, 4 pcs 45 Degree Pipes, 4 pcs 180 Degree U-Bends.
  • Sturdy Structure: Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, i.e. Maximizing Smoothest High Exhaust Air Flow Rate.
  • DIY Custom: These Exhaust Bend Kits Include Enough Tubing To Allow You To Run Your Own Exhaust System The Way You Want It.
Check Stock

Universal 4 Turbo Dual Smoker Diesel Exhaust Stack T Pipe System with 2Pcs 4 Inlet 8 Outlet Gloss Black Stainless Steel Miter Angle Cut Diesel Smoker Stack Tips

  • Universal 4" Turbo Dual Smoker Diesel Exhaust Stack T Pipe Kit + 4"Inlet 8"OutLet Cut Stack Tips Gross Black.
  • Designed For Chevy/Dodge/Ford Full Size Pickup Truck.
  • Smoke kits:T409 Stainless Steel & Coated Black.
  • Cut Exhaust Stack Tip：Inlet: 4" (101.6mm), Outlet: 8" (203.2mm), Total length: 36" (914.4mm) Gloss Black Finish.
  • Professional installation is highly recommended.
  • Package includes1 Set Smoke kit with 2 Cut Exhaust Stack Tip.
Check Stock

LucaSng Universal 5' Turbo Dual Smoker Diesel Exhaust Stack T Pipe System with 2Pcs 5' Inlet 8' Outlet Gloss Black Stainless Steel Miter Angle Cut Diesel Smoker Stack Tips

  • Universal 5" Turbo Dual Smoker Diesel Exhaust Stack T Pipe Kit + 5"Inlet 8"OutLet Cut Stack Tips Gross Black.
  • Designed For Chevy/Dodge/Ford Full Size Pickup Truck.
  • Smoke kits:T409 Stainless Steel & Coated Black.
  • Cut Exhaust Stack Tip：Inlet: 5" (127mm), Outlet: 8" (203.2mm), Total length: 36" (914.4mm) Gloss Black Finish.
  • Professional installation is highly recommended.
  • Package includes1 Set Smoke kit with 2 Cut Exhaust Stack Tip.
Check Stock

COMP Cams K12-600-4 Thumpr 227/241 Hydraulic Flat Cam K-Kit for Chevrolet Small Block

  • High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle..
  • 227/241 Duration at .050". 107 Degree Lobe Separation Angle. 0.479"/0.465" Valve Lift.
  • K Kits vary in their contents, but generally contain a camshaft, a set of lifters, valve springs, retainers, locks, valve seals, timing set, assembly....
  • Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note. Best with aftermarket converters....
Check Stock