Reviews Exhaust Header Collectors

Tight-Fit Small Block Fits Chevy Block Hugger Headers

  • These small block Chevy tight fit headers work well on early hot rods with narrow frame widths due to the slim 4" distance from the flange to outermost point.
  • 1-5/8" primary tubes and 2-1/2" collectors aid in fitting tight clearance applications.
  • These come painted black for corrosion protection prior to use - we suggest stripping the paint and applying your preferred color of high temperature header paint.
  • Oval exhaust ports fit stock small block Chevy heads - will not clear angle plug heads.
  • Come complete with gaskets, header bolts, and 2" reducers to connect to your exhaust system.
Check Stock

Flowtech 11572FLT Small Block Chevy Turbo Headers - Natural Finish

  • Available with 1-3/4” or 1-7/8” mandrel bent primary tubes and 2.50” collectors with merge spears for increased exhaust velocity.
  • 3/8” thick header flanges for a leak-free seal.
  • 2.50” V-band flanges and clamps for superior seal and even pressure at the flange.
  • Premium header gaskets and bolts included.
  • Designed for a variety of configurations (Up and Forward, Down and Forward, or Down and Back).
Check Stock

Small Block Chevy Hugger Tight Fit Headers, Raw Finish

  • These small block Chevy tight fit headers work well on early hot rods with narrow frame widths due to the slim 4" distance from the flange to outermost point.
  • 1-1/2" primary tubes and 2-1/2" collectors aid in fitting tight clearance applications.
  • Raw steel finish allows you to paint or ceramic coat to your choice of color.
  • Round exhaust ports fit stock small block Chevy heads - will not clear angle plug heads.
  • Come complete with gaskets, header bolts, and 2" reducers to connect to your exhaust system.
Check Stock

BETTERCLOUD 16PCS 3 76mm 304 Stainless Steel DIY Custom Mandrel Exhaust Pipe Straight & Bend Kit

  • Made In the USA 3.00 inch X Pipe Universal These Are NOT Mandrel Bent.
  • Add an “X” pipe Kit to Create Dual Exhaust.
  • Kit includes Heavy 16 GAGE 3.00 DIA BY 11.00" inch About 55.00 Inches Long Assembled (4) 20.00" Long Pipes + 3.00 inch Header Collectors and Clamps.
  • Exhaust Cross Over X Pipe (Please measure to make sure this fits your Car or Truck) This is not a direct Replacement it is Aftermarket.
Check Stock

Cuque Motorcycle Exhaust Mid-Pipe Middle Pipe Full Exhaust System Vent Middle Pipe Stainless Steel Vent Middle Tube for Honda MSX125 2013-2015

  • 【Applicable models】Exhaust Mid Header Pipe,The exhaust central pipe is designed according to the exhaust pipe structure of a specific model. It can perfectly replace AFRICA TWIN CRF1000L ADV 2016 ‑2019 and other series models. The performance is stable. Please confirm the model before buying, so as to bring you a good Use experience..
  • 【Durable material】Exhaust Header Tube,It is made of high-quality stainless steel with a tapered tube with a thickness of 1 mm/0.04 inch. It is heat-resistant, high-temperature resistant, sturdy and not easily deformed, and has strong durability..
  • 【Applicable models】Exhaust Mid Header Pipe,The exhaust central pipe is designed according to the exhaust pipe structure of a specific model. It can perfectly replace AFRICA TWIN CRF1000L ADV 2016 ‑2019 and other series models. The performance is stable. Please confirm the model before buying, so as to bring you a good Use experi....
Check Stock

Flowmaster 815425S Outlaw Race Muffler 2.5" Shrty 409S

  • Over the axle pipe with optional tailpipe exit.
  • Designed to be connected directly to the header collectors.
  • Can be added into an existing exhaust system.
Check Stock

Exhaust Wrap LIBERRWAY Header Wrap Exhaust Heat Wrap for Exhaust Pipes Tap Kit for Car Motorcycle, 2\x50ft with 10 Stainless Ties and Gloves

  • Premium Quality Exhaust Heat Wrap: LIBERRWAY exhaust wrap is made from pulverized lava rock. The header wrap reduces heat under hood up to 50% and improving car and motorcycle performance..
  • Effective Exhaust Header Wrap: Withstands 1400℉ direct heat and 2000℉ intermittent heat. Stronger and more durable for improved thermal performance and reliability. High resistance to abrasions, oil spills, temperatures and vibration breakdown..
  • Functional Header Wrap: Extremely pliable for a tight and secure wrap. Improves horsepower performance and can be used on car exhaust header wrap, motorcycle exhaust pipe, gas pipe and other custom applications..
  • Easy to Install: Before installing, soak the header heat wrap in water so that the fiberglass will not flying about. Wear gloves to avoid itching. Wrap it around your exhaust pipe, using overlap to hold it in place (like a tennis racket grip) and simply use stainless ties to secure the ends in place..
  • What You Get: A roll of 2 in (width) x 50 ft (length) x 1/16 in (thickness) header exhaust wrap, 10 pcs 0.3 in (width) x 11.8 ft (length) 304 stainless steel zip ties and a pair of gloves. LIBERRWAY exhaust wrap comes with 1 Year Free Warranty and Full Refund within 60 Days to ensure your pleasant shopping experience....
Check Stock

LIBERRWAY Exhaust Wrap Header Wrap Exhaust Heat Wrap for Exhaust Pipes Tap Kit for Car Motorcycle 2 Rolls of 2 x50ft with 20 Stainless Ties and Gloves

  • Premium Quality Exhaust Heat Wrap: LIBERRWAY exhaust wrap is made from pulverized lava rock. The header wrap reduces heat under hood up to 50% and....
  • Effective Exhaust Header Wrap: Withstands 1400℉ direct heat and 2000℉ intermittent heat. Stronger and more durable for improved thermal....
  • Functional Header Wrap: Extremely pliable for a tight and secure wrap. Improves horsepower performance and can be used on car exhaust header wrap,....
  • Easy to Install: Before installing, soak the header heat wrap in water so that the fiberglass will not flying about. Wear gloves to avoid itching.....
  • What You Get: 2 rolls of 2 in (width) x 50 ft (length) x 1/16 in (thickness) header exhaust wrap, 20 pcs 0.3 in (width) x 11.8 ft (length) 304....
Check Stock

2.5 Inch 2 Bolt Exhaust Flange Exhaust Gasket Connection Kit for for Exhaust Stainless Steel 2.5 2 1/2 63mm -1 Pcs Flange & 1 Pcs Gasket

  • Made In the USA 3.00 inch X Pipe Universal These Are NOT Mandrel Bent.
  • Add an “X” pipe Kit to Create Dual Exhaust.
  • Kit includes Heavy 16 GAGE 3.00 DIA BY 11.00" inch About 55.00 Inches Long Assembled (4) 20.00" Long Pipes + 3.00 inch Header Collectors and Clamps.
  • Exhaust Cross Over X Pipe (Please measure to make sure this fits your Car or Truck) This is not a direct Replacement it is Aftermarket.
Check Stock

Remflex 8002 Universal Exhaust Gasket, (Set of 2)

  • Universal 3” Collector Flange, 3 Bolt Holes, 3-3/8" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

  • Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 3003 Exhaust Gasket for Ford V8 Engine, (Set of 2)

  • 1-1/8 inch width x 1-1/2" height Stock Square Port.
  • Ford V8 - 302 ('81-'95), 351 ('69-'97) Windsor, 1-1/8" x 1-1/2" Square Port, Manifold or Headers, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock