Reviews Exhaust For Vortec

Remflex 2049 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Reflex's unique flexible graphite material has been proven for more than 30 years.
  • Chevy V8 - 4.8L, 5.3L, 5.7L- LS1, LS6 /6.0L- LS1, LS2 Vortec, 1-3/4" Round Port, For Headers, 2/Set.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • There are no rubber binders or composite materials in Remflex Exhaust Gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Assault Racing Products PC2021 Small Block Chevy Dual Plane High Rise Satin Aluminum Intake 1500-6500 RPM SBC

  • Dual Plane High Rise RPM Range: 1500 - 5500.
  • Square bore carb bolt pattern for the Holley 4150/4160 style carburetor.
  • Does not have provision for exhaust heated choke.
Check Stock

Remflex 2048 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - 4.8L, 5.3L, 5.7L- LS1, LS6/6.0L- LS1, LS2 Vortec, 1-1/2" RP, For Weld Bead Headers, 2/Set.
  • additional sealing material is provided around the weld bead to provide a better seal.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

JEGS Small Block Chevy Vortec Cast Iron Cylinder Head | Made In USA | 1 Per Package | Straight Spark Plug | 1.94” Intake / 1.5” Exhaust Valve | 170cc Intake Ports | .475” Max Lift

  • FITS ALL 1955-Present GM small blocks except LT1, LT4, and LS1-style engines.
  • UTILIZES FAST BURN COMBUSTION CHAMBERS and high-velocity intake and exhaust ports.
  • PERFORMS GREAT RIGHT OUT OF THE BOX and can be mildly ported and milled up to 0.040 inch.
  • REQUIRES A VORTEC-STYLE INTAKE MANIFOLD to complete installation.
  • SPECIFICATIONS: 1.94” intake / 1.5” exhaust valve, 170cc intake ports, .475” max lift, straight spark plug design, 3/8 “ rocker arm studs, 64cc combustion chambers, 1.25” valve springs.
Check Stock

LSX Header Bolts for LS1 LQ4 LQ9 LS9 4.8 5.3 6.0 6.2L Grade 10.9 Silverado Tahoe (Iron)

  • These bolts are made with hardened Grade 10.9 steel, and can withstand a minimum tensile strength of 150,000PSI..
  • Flange Bolts are identified by the built-in washer under the head that acts to distribute the clamping load over a greater area..
  • They are designed to provide the same holding power as if you were to use a washer..
  • These bolts are superior to original or OEM product, and are made to withstand high strength and extreme conditions, generally found in Motorsports!.
  • Fits: LS1, LS2, LS3, LS6, LS7, LS9, GM Vortec 4.8 5.3 6.0 6.2L with OEM Exhaust Manifolds & Aftermarket Headers..
Check Stock

A-Team Performance - Distributor Black Cap EFI VORTEC 1996-2002 and Red Spark Plug Wires Set 2 in 1 Kit - Compatible with Chevy GM Small Block 5.0L 5.7L 305 350 Tahoe C1500 K1500 C2500 K2500

  • Distributor Black Cap EFI VORTEC 1996-2002 and Red Spark Plug Wires Set 2 in 1 Kit.
  • Compatible with Chevy GM Small Block 5.0L 5.7L 305 350 Tahoe C1500 K1500 C2500 K2500.
  • EFI Vortec 1996-2002 Distributor - Direct EFI distributor replacement for stock units with improved features such as Zinc-coated steel hold down clamp for a secured fit.
  • Specifications - Magnetic Pick-Up Trigger, Computer-Controlled Advance Type, Crab-Style Female Cap, and 6 Cylinders. Spark Plug Wire - with Black Straight Boot for Crab Style Vortec Distributor, Black 90 Degree Boot for Spark Plug.
  • Long-lasting Service - Low-resistance heat conductor that can withstand wear and tear and last for years. Warranty and Compatibility - Spark Plug Wire is compatible with GMC Chevy GMC Truck SUV Vortec 5.0L 5.7L 5700 350 1996-2003 and comes with a one-year warranty.
Check Stock

A-Team Performance - Complete Distributor - Compatible with Chevy GM EFI VORTEC 1996-2002 Small Block 5.0L 5.7L 305 350 Tahoe C1500 K1500 C2500 K2500 Black Cap

  • EFI Vortec 1996-2002 Complete Distributor replacement for stock units with improved features such as Zinc-coated steel hold down clamp for a secured fit.
  • Compatible With Chevy / GM 5.0 L / 305 in3 commonly referred to as Vortec 50005 and .7 L / 350 in3 commonly referred to as Vortec 5700.
  • CNC-Machined — High-quality EFI distributor with CNC-machined aluminum housing, steel internal, and chromoly steel gear material construction.
  • Specification - Magnetic Pick-Up Trigger, Computer-Controlled Advance Type, Crab-Style Female Cap, and 6 Cylinders.
  • Direct replacements for stock units, but with improvements throughout.
Check Stock

Aluminum High Rise Small Block Chevy SBC Vortec Hurrican Single Plane Intake Manifold 350 Single Plane Modified 3000-7500 RPM

  • This Satin Vortec Hurricane Single Plane Intake Manifold is the best performing single plane race style manifold available for engines using the 1996 and later Vortec (Gen 1+) cylinder heads..
  • It has been proven over and over in dyno tests and on track use to provide unequaled power and performance..
  • It features four corner water ports, a tapped fifth port in the front face, nitrous bosses, and dual distributor holddowns..
  • 360° single plane high rise design for outstanding power from 3000~7500 RPM.
Check Stock

Gen III LS Head Gasket Kit for GM Chevy LS1 LS6 LQ4 LQ9/4.8L 5.3L 5.7L 6.0L 1997-2007 Cylinder Engine Block Valley Cover Gasket 12589226 12612350 12558178

  • ...60436/(1)Front Main Crank Seal#12585673/(2)Knock Sensor Grommet# 12558177/(4)Water Block Off Gaskets#12551933/(2)LS Water Pump Gasket #12630223/(1)Front Cover Gasket#12633904/(1)Rear Main Seal Gasket#12639249/(1)Oil Pan Gasket#12612350/(2)Cylinder Head Gasket#12589226/(1)Engine Block Valley Cover Gasket#12558178/(1)Exhaust Manifold Gasket#12617944/(1)Valve Cover Gasket#12637683.
Check Stock

Z Whip Stainless Steel LS Header Exhaust Manifold Bolt Kit. Compatible with all GM Chevy LS Series Engines LSX LS1 LS3 LS2 LQ4 LS6 LQ9 5.3L 6.0L 6.2L Hardened SS 304 (18-8) Bolts

  • Set of 12 Hardened 304 (18-8) Stainless Steel Bolts. These will not Rust or Corrode..
  • Compatible with all LS Series Engines 1997-2014 LS1, LS2, LS3, LS6, LS7, LS9, GM Vortec 4.8L 5.3L 6.0L 6.2L with OEM Exhaust Manifolds & Aftermarket Headers. Also Fits LSX LM7 LR4 LQ4 LQ9 L33 LH6 L92 L76 L99 L96 L82 L83 L84 L86 L87 Engines.
  • We are an AS9100D and ISO 9001:2015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. Parts we produce fly at 30,000 feet where failure is not an option. We put the same quality into every part we produce..
  • When you purchase Z Whip Parts you will always get the highest quality for your vehicle that you rightfully deserve.
  • Meets or Exceeds Industry Standard ASME / ANSI Specifications.
Check Stock

A-Team Performance – Marine Distributor Crab Style – Compatible with Mercruiser Volvo Penta 18-5351 Vortec V-8 884794A02 5.0L/ 5.7L/ 6.2L MPI

  • Compatible with Mercruiser Volvo Penta 18-5351 Vortec V-8 884794A02 5.0L/ 5.7L/ 6.2L MPI.
  • Reliable high signal strength trigger system.
  • Ball bearing and bushing combination provide maximum timing stability and long life. Aluminum housing construction.
  • Compatible with flat tappet or hydraulic roller cams Fits Vortec V-8 2001 and up 5.0L/ 5.7L/ 6.2L MPI EnginesReplaces Mercruiser 884794A02, Mallory 9-26751.
Check Stock

Brian Tooley Racing BTR Vortec Truck Stage 2 Cam and Spring Kit 4.8 5.3 6.0 Includes Beehive Springs and Michigan Motorsports Valve Seals

  • Brian Tooley Racing BTR Truck Stage 2 Camshaft Kit 4.8 5.3 6.0 Camshaft and Beehive Springs and Michigan Motorsports Valve Seals.
  • The Brian Tooley Vortec Racing Truck Cam Kit includes: Stage 2 Truck Cam, Beehive Springs and Michigan Motorsports Valve Seals.
  • These Vortec Truck cams use a 3 bolt cam gear and were designed with low lift so GM LS2, LS3 and LS6 springs and pushrods can be used, making these the most affordable truck cams available..
  • The Stage II cam has more of a noticable idle, with even more average torque production than the Stage I cam, at the sacrifice of some low end torque and fuel mileage..
  • This is the largest cam we recommend to run with stock 4L60E converter in a 4.8/5.3. Specs are 212/218 .553/.553 111.
Check Stock

Ignition Distributor Set Brass Terminals Distributor Cap and Rotor Kit compatible with Chevrolet GMC Cadillac Vortec V8 5.0l 5.7l 7.4l Compatible Part Number DR474 DR331

  • Distributors cap and rotor kit features brass inserts and stainless steel rotor springs,designed to provide the best possible fit to ensure maximum conductivity between the distributor towers and spark plug wires,prevents arc through and crossfire..
  • Engineered specifically compatible with General Motors Vortec V8 engines,specifically compatible with General Motors Vortec V8 engines,Offering the quality,reliability,durability..
  • Direct replacement ready to install,including the cap and rotor kits.Fuel mileage and acceleration better than OE part..
  • Recommended replacement part compatible with GM vehicle's original factory component,Fits standard and automatic transmissions..
  • Cap and rotor kits reference part number: 1104079,93441558,1104051,1104058..
Check Stock