Reviews Exhaust Cut And Clamp Systems

LucaSng 5 inch Inlet 8 inch Outlet Polished Stainless Miter Cut Diesel Exhaust Stack(Stack Smokers 5 inch ID Inlet 36 inch Long With Clamp), Silver

  • Inlet: 5", Outlet/Tip Size: 8", Length: 36" ,Polished Silver Finish.
  • Made of High Quality T409 Stainless Steel ,OE replacement assembly.
  • Fitment: Universal,For Truck, Ford, Dodge, Chevy.
  • Installation should depend on the inside diameter and outside size.
  • Miter Cut Diesel Smoker Exhaust Stack Tip For Diesel Exhaust Systems.
  • Package includes: 1 Exhaust Tip with 1 Exhaust Clamp.
Check Stock

LucaSng 5" Inlet 8" Outlet 36" Long Polished Stainless Steel Miter Angle Cut Diesel Smoker Exhaust Stack Tip(Smokers 5" ID Inlet 36" Long with Clamp)

  • Made of High Quality Stainless Steel ,OE replacement assembly.
  • Inlet: 5", Outlet/Tip Size: 8", Length: 36" ,Polished Silver Finish.
  • Miter Angle Cut Diesel Smoker Exhaust Stack Tip For Diesel Exhaust Systems.
  • Fitment: Universal,For Truck, Ford, Dodge, Chevy.
  • Installation should depend on the inside diameter and outside size.
  • Package includes: 1 Exhaust Tip with 1 Exhaust Clamp.
Check Stock

Tnuocke 2.0" Butt Joint Band Exhaust Seal Clamp Sleeve,50mm Stainless Steel Exhaust Sleeve Band for Exhaust Pipe, Muffler,Manifolds,Coupler H-031-50

  • Premiun Materials:The exhaust clamp is made from high quality stainless steel, stainless steel material, not easy to rust, corrosion-resistant,Precision-machined, shiny surface with no burr.
  • Prefect design:Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion.
  • Easy install:Put one of the nutbars on one side and insert the bolts, put another nut bar on, then screw the nuts, and connect.
  • Wide use:They are fit perfectly for exhaust tips, mufflers, cat back systems, racing exhaust.
  • Package:You will get 1 stainless steel Exhaust Band Clamp,The exhaust band clamp is reusable without damaging the pipes.
Check Stock

WONGWAI 4 PCS 2.5 Inch 2 1/2 Butt Joint Exhaust Band Clamp Sleeve, Stainless Steel Exhaust Clamp for Exhausts, Mufflers, Downpipes

  • HIGH-QUALITY MATERIAL - Made of premium 304 stainless steel, our exhaust clamp band sleeve has great corrosion resistance and not easy to rust. After many tests, they can give a good performance in the exhaust systems, and high quality in durability and reliability..
  • PERFECT SEALING CAPABILITY - These butt joint exhaust band clamps have been adopted high-strength fastening parts, providing the real leakage-free sealing capability. It is perfect for 2.5 inches exhaust pipes or mufflers..
  • 360 DEGREE FULL CLAMPING - Designed with an entire 360-degree full clamping area, the stainless steel exhaust clamp has an overall 360-degree clamping force without distorting exhaust pipe, muffler, or exhaust tubing in the exhaust system..
  • WIDE APPLICATIONS - These butt joint band clamps have removable and reusable bolts and nuts, which makes them durable and sturdy. They can be easily installed accurately without welding. They are suitable for exhausts, mufflers, downpipes, headers and manifolds..
  • MONEYBACK GUARANTEE - WONGWAI promises to provide you with a refund if you find any issue with our products in 30 days so that you can rest assured that you make the right choice. If you have any questions regarding our butt joint exhaust band clamp sleeve, please feel free to....
Check Stock

2.5" Lap Joint Band Clamp Exhaust Clamps Pipe Repair Parts Stainless Steel

  • ...5" ID Pipe, made of 304 stainless steel. There are 5 sizes for choose, it can meet your various needs. reducing costs and time Significantly..
  • The lap joint clamps 2.5" are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat back systems, racing exhaust, and show cars..
  • Conforms to pipe and flex tubing, exhaust pipe connector come with an "I" block provides a full 360 °equal distribution of stretching forces, without distorting the pipe, to create the best seal available without distorting pipe, This exhaust band clamp is specifically designed for exhaust pipes connection..
  • No welding design makes lap joint clamp fast, easy and accurate installation. It is removable and reusable. just need to put one of the nut bar on one side and insert the bolts, put another nut bar on, then screw the nuts, works done..
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 2.5" lap joint band clamp, you can feel free to contact us via Amazon Mail. We provide 24-hour mail s....
Check Stock

3 Inch Flexible Duct Hose 16 Feet Non-Insulated Aluminum Dryer Vent Hose Noise Reducer PVC Air Hose for HVAC Ventilation, Inline Duct Fan, Black (2 Clamps Included)

  • 【STURDY VENTILATION DUCT】3 Inch air duct hose made of aluminum foil thick layer of white PVC on this ducting, prevents light leaks. Flame-retardant coating，working on -22 to 266℉ environment..
  • 【LOW NOISE & LEAK PROOF】 This is reducing noise from fans and carbon filter systems, can decrease the noise by up to 50%. Steel spring wire lock together with the aluminum foil both outside and inside to form an airtight and leak proof lock system..
  • 【SUPER FLEXIBLE】Can be bent at 360° and freely stretched as well without deformation，no rigid elbow, help to reduce the ventilation resistance and the leak of wind..
  • 【EASY TO INSTALL】3 Inch 16 Feet Length (when fully extended) dryer hose with 2 x 304 stainless steel duct clamp，easy to secure on your inline fan or other duct openings, then use screwdriver fix the clamp on ducting. In additional, the length can be cut, you can simply cut it with scissor for what you ideal size..
  • 【Various Applications】Black dryer vent hose will move and deliver air in HVAC, Air Conditioner, Dryer Rooms, Bathroom(smell and moisture exhaust), Kitchens(cooking exhaust), Grow Tent and so on..
Check Stock

ESPEEDER 2.0" Lap Joint Band Clamp Exhaust Clamps Pipe Parts Stainless Steel 2Pcs

  • ...ade of 304 stainless steel. There are 5 sizes for choose, it can meet your various needs. Come with 2Pcs/Package. reducing costs and time Significantly..
  • The lap joint clamps 2.0 are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat back systems, racing exhaust, and show cars..
  • Conforms to pipe and flex tubing, exhaust pipe connector come with an "I" block provides a full 360 °equal distribution of stretching forces, without distorting the pipe, to create the best seal available without distorting pipe, This exhaust band clamp is specifically designed for exhaust pipes connection..
  • No welding design makes lap joint clamp fast, easy and accurate installation. It is removable and reusable. just need to put one of the nut bar on one side and insert the bolts, put another nut bar on, then screw the nuts, works done..
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 2.0" lap joint band clamp, you can feel free to contact us via Amazon Mail. We provide 24-hour mail s....
Check Stock

BLACKHORSE-RACING 4 Inch V Band Clamp with Stainless Steel Flange 4 Inch V Band Bolt Clamp with 2 Male Female Flanges for Turbo Pipe Performance Exhaust Sysformance Exhaust Pipes

  • √ 4 INCH STAINLESS STEEL EXHAUST CLAMP KIT - Complete V-band kit is ideal for performance exhaust systems, downpipes, catback exhausts, turbo back....
  • √ COMPLETE 4 PIECE KIT - This complete 4inch Vband kit includes 1x 4" V-Band clamp which is designed to accommodate the 2x stainless steel 4" Vband....
  • √ DESIGNED FOR 4" EXHAUST PIPES - This kit is specifically designed for 4" exhaust pipes. The flanges feature a recessed opening which allows for a....
  • √ PERFECT FOR TURBO AND HIGH HORSEPOWER VEHICLES - If you're making a downpipe, catback exhaust, turbo back exhaust, mid pipe, or up pipe for your....
  • √ EASY ON, EASY OFF - A V-band kit allows you to connect or disconnect sections of your exhaust by removing a single nut. Conventionally exhaust....
Check Stock

BLACKHORSE-RACING 3 Inch 76mm Stainless Steel V Band Bolt Clamp with 2 Male Female Flanges for Turbo Pipes SS V-Band Flange Kit

  • ▲ 3 INCH STAINLESS STEEL EXHAUST CLAMP KIT – Complete V-band kit is ideal for performance exhaust systems, catback exhausts, turbo back exhausts and more..
  • ▲ COMPLETE 3 PIECE KIT – This complete 3inch Vband kit includes 1x 3″ V-Band clamp which is designed to accommodate the 2x stainless steel 3″ Vband flanges.
  • 1 male flange and 1 female flange. This allows for the flanges to properly align during installation to insure a leak free seal..
  • ▲ DESIGNED FOR 3″ EXHAUST PIPES – This kit is specifically designed for 3″ exhaust pipes. The flanges feature a recessed opening which allows for a 3″ exhaust to easily slip inside the flange, providing a perfect overlap seam for welding..
  • ▲ PERFECT FOR TURBO AND HIGH HORSEPOWER VEHICLES – If you’re making a catback exhaust, turbo back exhaust, mid pipe, or up pipe for your car, truck, or other vehicle this V-band kit is ideal for connecting different pipe sections. Conventional exhaust flanges multiple nuts, bolts, washers and a gasket. A V-band kit eliminates all of these and allows for a connection with a single nut..
  • ▲ EASY ON, EASY OFF – A V-band kit allows you to connect or disconnect sections of your exhaust by removing a single nut. Conventionally exhaust flanges involve multiple ....
Check Stock

AutoEC Heat Shield Tape, Self-Adhesive Heat Reflective Tape Roll, Adhesive Backed Heat Barrier for Car, Truck, Motorcycle (1.5\X 15')

  • LIGHTWEIGHT: Giant Loop’s Hot Spring Heat Shield is a lightweight heat problem-solver for virtually any motorcycle exhaust system. This exhaust shield protects bags and bodywork from heat damage..
  • PECIFICATIONS: Made of rugged laser-cut aluminum construction, it weighs 3.2oz and measures 6” long X 2-2-3/4″ wide X 7/8″ tall. Includes stainless steel clamp - 27″ circumference, 8″ diameter (conforms to shape of exhaust as it’s tightened, fits every can we’ve seen).
  • UNIVERSAL FIT: Attach to virtually any motorcycle make/model, including dual sport, enduro, adventure touring and sport bike. It is easy to install on any make or model. For full details, read the installation instructions that you’ll find below..
  • RECOMMENDED USE: We recommend using our heat shield to protect your bags and bodywork from your bike’s exhaust system. We include one heat shield with the MoJavi Saddlebag, Coyote Saddlebag and Great Basin Saddlebag and 2 are included with Siskiyou Panniers. Additional heat shields are highly recommended as additional protection for dual exhaust motorcycles..
  • GO LIGHT, GO FAST, GO FAR: Giant Loop started just with a single saddlebag sold online by two adventure motorcycle riders and it’s now one of the most innovative motorcycle so....
Check Stock

2PCS Exhaust Clamps 3 Inch Butt Joint Exhaust Pipe Muffler Clamp Band Stainless Steel Connection for Cars

  • Size: We offer you 2pcs exhaust clamps, which you can measure better before you buy. These fixtures feature a unitary construction that minimizes part count and maximizes material efficiency and weight..
  • Material: The band clamp is a wide band of metal, usually stainless steel, wrapped around the exhaust pipe joint. Our products are preformed rings and are now more commonly used in high-end aftermarket exhaust systems that use slip fit because they are relatively inexpensive and can be reused without damaging the pipe..
  • Flexible Disassembly and Repair: The butt strap clamp is a simple and effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Offering unique sealing and high clamping loads, it does not distort your exhaust components and provides flexible removal and repair..
  • Save Time and Effort: Distribute the clamping force evenly over the entire 360° range to prevent leakage and control material deformation. It is easy to install or disassemble with one bolt, saving time and effort. T-304 strip stainless steel and carbon steel galvanized hardware..
  • Satisfied Customer Service - Both product quality and payment, will always be guaranteed. We are responsible sellers, always providing high quality products a....
Check Stock

FORTLUFT Exhaust Dual Tip Carbon Fiber & Stainless Steel (3.50''/89mm, Dual Tip Competition Style RIGHT SIDE)

  • Right Side - Outside Diameter 3.50''/89mm - Inlet Pipe Outside Diameter 2.50''/63.5mm.
  • Universal, Stainless Steel and Carbon Fiber, Nonmagnetic.
  • FORTLUFT provides the guarantee for the Exhaust Dual Tip Slant Cut Competition Style Carbon Fiber & Stainless Steel corrosion-resistance for the 1-year period or during the next 15000 miles (24000 km) after the spare part installation..
  • The universal Exhaust Dual Tip Slant Cut Competition Style Carbon Fiber & Stainless Steel FORTLUFT is part of the automobile exhaust system. This element decorates and completes the exhaust system providing a car with the sport style look. Thanks to the universal fastening coupled with a clamp, this spare part can be used for any car brand..
  • The spare part has a modern design and is made from the high-quality Carbon Fiber & Stainless Steel. Exhaust Dual Tip Slant Cut Competition Style perfectly blends with the car making it look sporty and aggressively. Leading car tuning studios recommend such kinds of tips to their customers. Exhaust Dual Tip Slant Cut Competition Style Carbon Fiber & Stainless Steel has two nozzles of different lengths. There are two models provided depending on the installation method: left side and right side..
Check Stock

Banjo TC206 2\ T-Bolt Hose Clamp

  • Features a Quick Release T-Bolt to allow quick and easy installation without having to fully disassemble the clamp..
  • The clamp is made of 100% 304 stainless steel for excellent weather and corrosion resistance..
  • HPS Aluminum V-Band flanges are made of 6061 aluminum and utilize a NBR o-ring to create an air-tight seal for positive pressure applications. Ideal for intercooler piping systems as well as intake systems..
  • The HPS Aluminum V-Band flanges feature a male and female side to automatically align the flanges onto each other to eliminate improper installation..
  • The back side of HPS V-Band flanges feature a recessed lip to help center your aluminum tubing to the flange and allow unrestricted air flow. REMARK: Do not use HPS Aluminum V-Band kits for exhaust applications..
Check Stock