Reviews Exhaust Brake

Air Powered Brake Piston Wind Back Tool Pneumatic Brake Caliper Compression Tool Brake Caliper Piston Compressor Rewind Tool Brake Pump Adjusting Tool for Auto Repair

  • Professional Design: Brake caliper compression tool features anti slip knurled handle, exhaust button, pressure plate with rubber sleeve, magnetic head and inlet interface. Made of high carbon steel for durability..
  • Simple Operation: Use the brake compressor on left or right hand thread brake system wheel cylinder piston brake calipers (wind back calipers and some push back single piston calipers) with the 1/4inch air hose adapter to simplify brake jobs..
  • Brake Caliper Piston Tool: Use the ratcheting brake caliper compressor tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads..
  • Ratcheting Action: Brake piston compression tool provides 360 degree swing.
  • center located ratchet screw creates an even force when compressing the piston to ensure proper alignment and prevent damage to your brake assembly.
  • reverse movement by flipping the switch on the handle tool to retract the compression plate..
  • Easy Reset: Drain the fluids from calipers then remove the caliper and worn brake pads from your rotor assembly.
  • Retract brake caliper press plates to fit inside the caliper cavity.
  • Begin ratcheting slowly and steadily until the pisto....
Check Stock

Front and Rear Brake Kit, Drilled and Slotted Brake Rotors Ceramic Brake Pads Suitable for CADILLAC ESCALADE SILVERADO 1500 TAHOE GMC YUKON

  • ★Performance Improvement★ The brake discs rotors use drilling and slotting technology, which can not only enhance the dust exhaust function, but also improve the heat dissipation performance and keep stable in braking..
  • ★Ceramic formula★ The brake pads use ceramic formula, which is clean, and no noise during braking..
  • ★Most competitive★ Competitive price and guaranteed to perform better or equal to OE parts..
  • ★Notice★ Note-Please read the description and compatibility chart before you place an order. Please contact us at any time if you have any question..
  • ★Includes★ 2x Front Drilled & Slotted Disc Brake Rotors（Front rotor size 330mm）.
  • 2x Rear Drilled & Slotted Disc Brake Rotors（Rear rotor size 345mm）.
Check Stock

Stark Thermal Wrap 1\ Wide x 50' Long - Fiberglass Heat Shield Exhaust Manifold/Header Wrap - Yellow

  • Reduce up to 90% Radiant Heat - helps shield fuel lines, brake lines, wire looms and more from radiant heat.
  • Rated for 1350°F continuous, 2000°F intermittent. Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this exhaust header wrap.
  • Fiberglass exhaust header wrap can create more horsepower and reduce under hood temperatures.
  • 1/16" x 1" x 50' Roll fiberglass exhaust heat wrap wiht 11-3/4" stainless ties (pack of 5).
  • Special weave makes it easier to wrap around bends, and gives carbon fiber look..
Check Stock

Stark Thermal Wrap 2\ Wide x 50' Long - Fiberglass Heat Shield Exhaust Manifold/Header Wrap - Yellow

  • Reduce up to 90% Radiant Heat - helps shield fuel lines, brake lines, wire looms and more from radiant heat.
  • Rated for 1350°F continuous, 2000°F intermittent. Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this exhaust header wrap.
  • Fiberglass exhaust header wrap can create more horsepower and reduce under hood temperatures.
  • 1/16" x 2" x 50' Roll fiberglass exhaust heat wrap wiht 11-3/4" stainless ties (pack of 5).
  • Special weave makes it easier to wrap around bends, and gives carbon fiber look..
Check Stock

Holoras Exhaust Pipe Springs Puller T-Spring Remover Installer Hook Tool for Motocross Motorcycle Kart Bike

  • T-spring remover installer is made of Plastic and Metal, it has good quality.
  • This spring puller is used to remove exhaust pipe springs, seat or tank holding spring, brake springs, side stand springs, center stand springs,....
  • Security added to grip when applying tension to the spring, makes exhaust spring removal easy..
  • The easy pain free way of removing and re-installing your exhaust spring.
  • Excellent grip with PVC coated handle. Small size, easy to carry..
Check Stock

LEDAUT 2\x 50' Twill Weave Motorcycle ATV Titanium Exhaust Heat Shield Wrap with 11.8\ Locking Ties (Pack of 15)

  • Reduce up to 90% Radiant Heat - helps shield fuel lines, brake lines, wire looms and more from radiant heat.
  • Rated for 1350°F continuous, 2000°F intermittent. Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this exhaust header wrap.
  • Fiberglass exhaust header wrap can create more horsepower and reduce under hood temperatures.
  • 1/16" x 1" x 50' Roll fiberglass exhaust heat wrap wiht 11-3/4" stainless ties (pack of 5).
  • Special weave makes it easier to wrap around bends, and gives carbon fiber look..
Check Stock

Maxon Auto Corporation 2 Roll 2\ x50' Black Fiberglass Exhaust Heat Wrap Heat Shield Sleeve with Stainless Steel Zip Ties (Pack of 20)

  • Reduce up to 90% Radiant Heat - helps shield fuel lines, brake lines, wire looms and more from radiant heat.
  • Rated for 1350°F continuous, 2000°F intermittent. Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this exhaust header wrap.
  • Fiberglass exhaust header wrap can create more horsepower and reduce under hood temperatures.
  • 1/16" x 1" x 50' Roll fiberglass exhaust heat wrap wiht 11-3/4" stainless ties (pack of 5).
  • Special weave makes it easier to wrap around bends, and gives carbon fiber look..
Check Stock

Samurai 2-Part Spray Paint for Car Exhaust Pipe - High Heat (Black, Pack of 1 Can)

  • Exhaust Pipe paint withstand temperature up to 1200 °F / 649 °C.
  • Specially formulated to brighten and customize your exhaust pipe with durable coating feature to protect against exposure to excessive heat.
  • Easy-to-use paint comes with everything you need include prevent rust, corrosion, chipping, brake dust, and automotive chemical and it is also best on all High Heat surfaces..
Check Stock

Rampage Xt 1/5 Scale Gas Truck (Blue)

  • Powerful 2-stroke gas engine, Pull start, Large capacity fuel tank, Tuned Exhaust pipe, 4mm 6061 T6 Aluminum chassis, Aluminum body oil filled shocks, Front and rear gear differentials, Ball bearings throughout..
  • Easily tuned gas engine w/ choke, Tunable centrifugal clutch, Adjustable brake linkage, Adjustable ride height, Tunable suspension, Multiple shock locations, Adjustable toe angle, Adjustable camber..
  • Aggressive monster truck tires, Shaft driven durability, Enclosed battery box, Chrome tuned pipe, Engine enclosed in roll cage..
  • Powerful 30cc HY 2-Stroke Gas Engine, High torque throttle/brake servo, High torque 1/5 scale steering servo, 2.4GHz radio system..
Check Stock

Sparks Racing X-6 Stainless Steel Race Core Full Exhaust - Compatible with Honda Trx400ex

  • The Big Gun Evo Racing Series was designed to deliver maximum horsepower and torque gains throughout the RPM range..
  • Made from .049 stainless steel tubing and an aluminum muffler canister, the Evo exhaust system is much lighter than stock units..
  • Our sleek muffler design also allows for maximum clearance to avoid your exhaust from hitting the rear brake caliper..
  • 96-98dbs track and trail legal (with Vortex insert sold separately)..
Check Stock

7CP02 BrakeAway Motorcycle Cruise Control For Sport Models

  • Fitment : 1991-2003 For Harley Sportster XL883 XL1200.
  • Package Included: 1 Set Forward Control Complete Kit Pegs Levers Linkage(As The Piciure,Not Including Other).
  • Complete assemblies for both brake and shifter sides. Made by Accessories Custom Cruisers Highest Quality CNC Billet Aluminum and Stainless Steel.
  • These forward controls move your feet approximately 12" (30cm) forward Complete assemblies for both brake and shifter sides. Kit includes pegs, shifter peg, linkages and hardware(As the Picture Shown)..
  • Mounts easily ,You do not need to purchase anything else, just bolt them on. These controls will not work on cycles with an engine guard, 2-in-1 exhaust or crash bars..
Check Stock

Aluminum Billet Forward Controls Pegs For Harley Davidson Softails (Softail 2000-2017, Black（new version）)

  • Package Include: Forward Controls Complete Kit Peg Levers Linkage + Set of Mounting Accessories (As the picture shown).
  • Compatible with 1991 1992 1993 1994 1996 1997 1998 1999 2000 2001 2002 2003 Harley Sportster XL883 XL1200. These controls will not work on cycles with an engine guard, 2-in-1 exhaust or crash bars..
  • Complete assemblies for both brake and shifter sides..
  • These forward controls move your feet approximately 12" (30cm) forward Complete assemblies for both brake and shifter sides. Kit includes pegs, shifter peg, linkages and hardware.
  • Made of Steel Machined with Anodized and Powder Coated.
Check Stock

SANJOIN Trampoline Spring Pull Tool (T-Hook) (1 Pack)

  • Made of premium stainless steel, eco-friendly, sturdy, rustproof, water resistant and durable, good for long-lasting using..
  • Extra long handle for easily use away from oil, dirty..
  • Great for vehicle brakes, riding lawn mower decks, and other equipment.
  • For removing muffler springs, removing tight drum brake springs, pulling flat agitators out of top load washers, installing snow blower springs.
  • Universal for all vehicles and standard springs..
  • Easy to Use. This exhaust spring puller tool with T handle, it is easy to use and save more effort and time compared to other tools when works..
  • The brake spring hook saves your knuckles from getting smashed and saves you from losing and breaking springs..
Check Stock