Reviews Evga 8plus 600w Atx 12v Eps

CPU 8 Pin Male to CPU 8 Pin (4+4) Male EPS-12V for Motherboard Power Adapter Cable ONLY for Corsair Modular Power Supply 32 inches (NOT PCI-e - NOT GPU VGA Cable !!!) TeamProfitcom

  • Connector 1: CPU 8 Pin Male (plug into the power connector of power supply).
  • Connector 2: CPU 8 pin (4+4) male EPS 12V (plug into the Motherboard) -Please Note that the two connectors cannot be used alternately.
  • NOTE :Compatible ONLY !!! with motherboard with ATX 4 pin or 8 pin port CPU 8(4+4) pin end could be used as EPS ATX 8 pin or ATX 4 pin.
  • Compatible with ONLY Corsair modular power supply such as: HX750/HX1200/TX850M/TX750M/TX650M/CX750M/CX650M/CX550M/AX760I/AX860I/AX1500I/AX760/AX850/AX860/HX1200I/HX1000I/HX850I/HX750I/RM1000I/RM850I/RM750I/RM650I/RM1000X/RM850X/RM750X/RM650X/RM550X/RM1000/RM850/RM750/RM650/RM550/RM450/SF600/SF450.
  • NOTE: Do not work with AX1200 !!! Do not work with EVGA PSUs !!!.
  • Length including connectors: 32 inches, ribbon cable black ,Gauge:standard 18 AWG - UL1007.
Check Stock

JZYMOD EPS12V CPU 8 Pin Female to CPU ATX 8 Pin and ATX 4 Pin Male Power Supply Extension Cable

  • Connector A:EPS12V 8 Pin CPU Female Connector.
  • Connector B: ATX12V 8 Pin Male Connector. Connector C: ATX12V 4 Pin Male Connector.
  • Compatibility: Compatible with all PSUs - ATX, SFX, Fanless PSU.Compatible with motherboard that has 8-pin +12V socket, 4-pin +12V socket or 8-pin +12V socket and 4-pin +12V socket..
  • Built to last: Thick 18AWG wire gauge for heavy-duty use. Fully black flexible flat array design allows for neat builds and good airflow inside your case..
  • What You Get: EPS12V CPU 8 Pin Female to CPU ATX 8 Pin and ATX 4 Pin Male Power Supply Extension Cable (10.6in), user manual, 12-month warranty, and our friendly customer service..
Check Stock

Thermaltake SMART 600W ATX 12V V2.3/EPS 12V 80 Plus Certified Active PFC Power Supply PS-SPD-0600NPCWUS-W

  • Delivers 600W Continuous output at plus 40℃. Compliance with Intel ATX 12V 2. 31 and EPS 12V 2. 92 standards.
  • 80 PLUS Certified – 80% efficiency under typical load. Power good signal is 100-500 millisecond.
  • Supports (2) PCI-E 6 plus 2pin Connectors. Active (PFC) Power Factor Correction, MTBF: 100, 000 hours.
  • Industry Grade Protections: (OPP) Over Power Protection, (OVP) Over Voltage Protection, (SCP) Short Circuit Protection.
  • Hold up time is 16 millisecond minimum within 60 percent load. Input frequency range 50 - 60 in Hz.
Check Stock

ATX CPU 8 Pin Power Extension Cable CPU 8 Pin Female to 8(4+4) Pin Male EPS-12V Extension Cable for Motherboard 32 Inches TeamProfitcom

  • Connector 1: standard ATX CPU 8 pin EPS-12V female (connect to power supply 8 pin EPS).
  • Connector 2 : EPS-12V 8(4+4) pin male (connect to Motherboard 8(4+4) pin EPS).
  • This cable is compatible with ALL power supplies !!!.
  • EPS 8 Pin Power Extension Cable features one ATX CPU 8 Pin 12V female connector and one 8(4+4) Pin ATX 12V male connector, extending your cable length from the power supply to the CPU motherboard by 32-inches.
  • Length :32 inshes, Gauge:standard 18 AWG - UL1007 , Max Rated power : 500W.
Check Stock

CPU 8 Pin Power Extension Cable ATX CPU 8 Pin Female to 8(4+4) Pin Male EPS Extension Cable for Motherboard (Not PCI-e VGA) 12 Inches (2 Pack) TeamProfitcom

  • Connector 1: standard ATX CPU 8 pin EPS-12V female (connect to power supply 8 pin EPS).
  • Connector 2 : EPS-12V 8(4+4) pin male (connect to Motherboard 8(4+4) pin EPS).
  • This cable is compatible with ALL power supplies !!!.
  • EPS 8 Pin Power Extension Cable features one ATX CPU 8 Pin 12V female connector and one 8(4+4) Pin ATX 12V male connector, extending your cable length from the power supply to the CPU motherboard by 12-inches ( This cable NOT pci-e 8 pin ).
  • Length :12 inshes, Gauge:standard 18 AWG - UL1007 , Max power rating: 500W.
Check Stock

OwlTree 2 Pack EPS12V CPU 8 Pin Female to CPU ATX 8 Pin and ATX 4 Pin Male Power Supply Extension Cable EPS 12V for Motherboard 10.6 inch

  • Compatible: work with motherboard with ATX 4 pin, 8 pin or 8+4 pin ports.
  • Connector A: EPS 12V 8 Pin CPU Female Connector. Connector B: ATX 12V 8 Pin (4+4 Detachable) Male Connector. Connector C: ATX 12V 4 Pin Male Connector.
  • Length: 10.6inch/27cm, UL1007 18AWG, 34*0.178TS Tinned Copper Wire, Higher Quality than Regular Cable.
  • Solution: The CPU 8 Pin Female to CPU 8 Pin (4+4) +4 Pin Male Cables provide a good solution for the motherboard required 8+4 pin ATX ports,Compatibility: Compatible with all PSUs - ATX, SFX, Fanless PSU.Compatible with motherboard that has 8-pin +12V socket, 4-pin +12V socket or 8-pin +12V socket and 4-pin +12V socket..
  • This cable only works with motherboard, not PCI-Express video cards. Serious damage can be caused if your use it in place of PCI-Express video cards..
  • Package: 2 Pack EPS12V CPU 8 Pin Female to CPU ATX 8 Pin and ATX 4 Pin Male CPU Power Adapter (10.6in).
Check Stock

JZYMOD EPS12V CPU 8 Pin Female to CPU ATX 8 Pin (4+4) Male Power Supply Extension Cable

  • Connector A:EPS12V 8 Pin CPU Female Connector.
  • Connector B: ATX12V 8 Pin (4+4) Male Connector.
  • Compatibility: Compatible with all PSUs - ATX, SFX, Fanless PSU.Compatible with motherboard that has 8-pin +12V socket or 4-pin +12V socket..
  • Built to last: Thick 18AWG wire gauge for heavy-duty use. Fully black flexible flat array design allows for neat builds and good airflow inside your case..
  • What You Get: EPS12V CPU 8 Pin Female to CPU ATX 8 Pin (4+4) Male Power Supply Extension Cable, user manual, 12-month warranty, and our friendly customer service..
Check Stock

CPU 8 Pin Male to CPU 8 4+4 Pin Male TeamProfitcom EPS-12V Motherboard Power Adapter Cable for EVGA Modular Power Supply 32 inches NOT PCI-e - NOT GPU VGA Cable !!!

  • Connector 1 - CPU 8 Pin Male (connecting to the EVGA power supply).
  • Connector 2 - CPU 8(4+4) Pin Male (connecting to the motherboard).
  • NOTE :Compatible ONLY !!! with motherboard with ATX 4 pin or 8 pin port CPU 8(4+4) pin end could be used as EPS ATX 8 pin or ATX 4 pin !!! ATTENTION....
  • NOTE : compatible ONLY with EVGA modular power supply - 650GS / 750B2 / 1000G1/850G1/750G1/650G1 / 1600T2/1000T2/850T2/750T2 /....
  • Length including connectors: 32 inches , Gauge:standard 18 AWG - UL1007.
  • This cable is only for the brand and model as listed. In order to avoid any compatible problems, please carefully check your PSU's brand, model and....
Check Stock

TAYCCEU CPU 8 Pin Female to CPU 8 Pin and ATX 4 Pin Male Power Supply Extension Cable EPS 12V for Motherboard, 9.5 inch/24cm

  • 【CPU Power Cable】EPS 12V CPU 8 Pin Female to CPU 8 Pin and ATX 4 Pin Male Power Supply Extension Cable for Motherboard..
  • 【Easy to Install】EPS 12V CPU 8 Pin Female end to plug into 8 pin male to 8 pin male cable of power supply, CPU 8 pin and ATX 4 pin male ends to plug into the motherboard..
  • 【Compatibility】Compatible with all PSUs - ATX, SFX, Fanless PSU. Compatible with motherboard that has 8-pin +12V socket, 4-pin +12V socket or 8-pin +12V socket and 4-pin +12V socket. It is availble to use the single CPU 8pin, single ATX 4 pin or both of CPU 8 pin + ATX 4 pin..
  • 【Specification】Length: 9.5 inch/24cm, Gauge: 1007-18AWG(standard tin-coating copper wire), Quantity: 1pcs..
  • 【Note】This cable is a common power supply Y-splitter extension cable, not converted cable. It supports all of power supplies with CPU 8 pin male port output. It needs to be connected to CPU 8 pin Male to Male Power Cable of PSU. Please use it correctly..
Check Stock

CORSAIR RMx Series, RM1000x, 1000 Watt, 80+ Gold , Fully Modular Power Supply (Renewed)

  • 80 PLUS Gold certified: High efficiency operation for less excess heat and lower operating costs.
  • 100% All Japanese 105 capacitors: Premium internal components ensure solid power delivery and long term reliability.
  • Zero RPM Fan Mode: Virtually silent operation at low and medium loads. 6th generation Intel Core processor Ready (Intel Skylake and Z170 motherboards)ATX12V v2.4 and EPS 2.92 standards and is backward compatible with ATX12V 2.2, 2.31 and ATX12V 2.01 systems.
  • Fully Modular: Make your builds and upgrades easy, with clean, great-looking results.
Check Stock

Corsair RMx Series, RM1000x, 1000 Watt, 80+ Gold Certified, Fully Modular Power Supply (CP-9020094-NA)

  • 80 PLUS Gold certified: High efficiency operation for less excess heat and lower operating costs.
  • 100% All Japanese 105 capacitors: Premium internal components ensure solid power delivery and long term reliability.
  • Zero RPM Fan Mode: Virtually silent operation at low and medium loads. 6th generation Intel Core processor Ready (Intel Skylake and Z170 motherboards)ATX12V v2.4 and EPS 2.92 standards and is backward compatible with ATX12V 2.2, 2.31 and ATX12V 2.01 systems.
  • Fully Modular: Make your builds and upgrades easy, with clean, great-looking results.
  • Ten year warranty: Your guarantee of reliable operation that will last across several system builds.SATA Connector:11.
Check Stock

CORSAIR HX Series HX1000 1000 Watt 80+ Platinum Certified Fully Modular Power Supply Renewed

  • 80 Plus Platinum: Runs cooler and uses less power than less efficient power supplies.
  • Fully Modular: Allows user to only use the cables they need for a cleaner looking build with better airflow.
  • 10-year warranty: Backed by Corsair's legendary technical support and customer service.
  • 135mm FDB fan with Zero RPM mode: Virtually silent operation at low loads,+12V Rail Switch: Gives the user the choice of a single +12V rail or....
  • ATX12V v2.4 and EPS 2.92 standards and is backward compatible with ATX12V 2.2, 2.31 and ATX12V 2.01 systems.
Check Stock

Corsair HX Series HX1000 1000 Watt Fully Modular Power Supply 80+ Platinum Certified CP-9020139-NA

  • 80 Plus Platinum: Runs cooler and uses less power than less efficient power supplies.
  • Fully Modular: Allows user to only use the cables they need for a cleaner looking build with better airflow.
  • 10-year warranty: Backed by Corsair's legendary technical support and customer service.
  • 135mm FDB fan with Zero RPM mode: Virtually silent operation at low loads,+12V Rail Switch: Gives the user the choice of a single +12V rail or....
  • ATX12V v2.4 and EPS 2.92 standards and is backward compatible with ATX12V 2.2, 2.31 and ATX12V 2.01 systems.
Check Stock