Reviews Ethernet Balun

Cable Matters 4K 1x2 HDMI Extender Splitter (4K HDMI Over Ethernet Extender Kit ) for 1-to-2 Setups – Supports 4K up to 131 Feet / 1080p up to 230 Feet

  • Extend and expand your HDMI video setup with the Cable Matters HDMI balun kit with 4K HDMI extender support.
  • HDMI Extender Splitter 4K converts and extends an HDMI signal over Ethernet cable for long-distance cable runs.
  • HDMI extender over Cat6 supports a maximum resolution of 4K 30Hz at up to 131 feet or 1080p 60Hz at up to 230 feet with properly shielded Cat6 cable.
  • Extend your HDMI signal to distances not possible with even active HDMI cables.
  • HDMI over Cat6 extender kit features a local video loop-back function on the transmitter for displaying video output locally.
  • HDMI to Ethernet adapter includes a programmable resolution and refresh rate control system for specific control.
  • HDMI to Cat6 converter kit includes an HDMI to Ethernet transmitter and 2x Ethernet to HDMI receivers.
  • Convenient package includes everything needed to set up and use a HDMI extender 4K.
  • Use the included IR transmitters to control each connected television from one location.
  • HDMI Ethernet extender splitter is perfect for connecting multiple HDMI displays to the same source across long distances.
  • HDMI Cat6 extender is ideal for use in restaurants, churches, schools, and offices.
Check Stock

HAM HF Band Radio Antenna Balun QRP Tuner Amateur DIY kit NXO-100

  • HAM Shortwave Radio Magnetic Balance Kits adopts large-size high-quality nickel-zinc magnetic ring, which can work in the short-wavelength range of....
  • 1:1 balun is applicable to bipolar DP (inverted V antenna is V) Yagi antenna (40-100)..
  • 1:4 balun for LOOP antenna and Winton antenna (200-400Ω).1:9 balun is suitable for long-line antennas, with manual day adjustment or automatic day....
  • You will receive the balun kits with the instructions.Or please contact the seller for the PDF instructions. Enjoy.Thank you.
  • It can withstand 100W-200W. It can easily produce high-performance balun to ensure efficient radio transmission and reception. It allows you to fully....
Check Stock

Hechengdianzi HAM 1-30 Mhz Manual Antenna Tuner for HAM HF Radio QRP DIY Kits, Good Helper for Antenna Erection

  • HAM Shortwave Radio Magnetic Balance Kits adopts large-size high-quality nickel-zinc magnetic ring, which can work in the short-wavelength range of 1-30MHz ..
  • 1:1 balun is applicable to bipolar DP (inverted V antenna is V) Yagi antenna (40-100)..
  • 1:4 balun is suitable for the LOOP antenna and the Winton antenna (200-400). 1:9 balun is suitable for antenna..
  • You will receive the balun kits with the instructions.Or please contact the seller for the PDF instructions. Enjoy.Thx.
  • It can withstand 100W-200W. It can easily produce high-performance balun to ensure efficient radio transmission and reception. It allows you to fully enjoy the fun of DIY..
Check Stock

1-30Mhz HAM HF Radio Antenna Equipment Shortwave Radio Balun Kit NXO-100 Magnetic Balance Amateur Radio Antennas DIY

  • HAM Equipment 1-30Mhz Shortwave Radio Magnetic Balance Kits adopts large-size high-quality nickel-zinc magnetic ring, which can work in the short-wavelength range of 1-30MHz ..
  • It can withstand 100W-200W. It can easily produce high-performance balun to ensure efficient radio transmission and reception. It allows you to fully enjoy the fun of DIY..
  • 1:1 balun is suitable for bipolar DP antenna (inverted V positive V) antenna such as Yagi (40-100Ω). 1:4 balun for LOOP antenna and Winton antenna (200-400Ω)..
  • 1:9 balun is suitable for long-line antennas, with manual day adjustment or automatic day adjustment..
  • You will receive the balun kits with the instructions.Or please contact the seller for the PDF instructions. Enjoy.Thank you.
Check Stock

HAM HF Band1-30Mhz shortwave Radio Balun Unun DIY kit Radio Wire Loop Antenna, NXO-100 Magnetic Balance

  • HAM Equipment 1-30Mhz Shortwave Radio Magnetic Balance Kits adopts large-size high-quality nickel-zinc magnetic ring, which can work in the short-wavelength range of 1-30MHz ..
  • 1:1 balun is suitable for bipolar DP antenna (inverted V positive V) antenna such as Yagi (40-100Ω). 1:4 balun for LOOP antenna and Winton antenna (200-400Ω)..
  • 1:9 balun is suitable for long-line antennas, with manual day adjustment or automatic day adjustment..
  • It can withstand 100W-200W. It can easily produce high-performance balun to ensure efficient radio transmission and reception. It allows you to fully enjoy the fun of DIY..
  • You will receive the balun kits with the instructions.Or please contact the seller for the PDF instructions. Enjoy.Thank you.
Check Stock

E-outstanding 7 Section Telescopic Antenna, SMA Male Connector Aerial, DVB-T Radio Scanner VHF UHF for Radio TV DIY

  • HAM Shortwave Radio Magnetic Balance Kits adopts large-size high-quality nickel-zinc magnetic ring, which can work in the short-wavelength range of 1-30MHz ..
  • 1:1 balun is applicable to bipolar DP (inverted V antenna is V) Yagi antenna (40-100)..
  • 1:4 balun for LOOP antenna and Winton antenna (200-400Ω).1:9 balun is suitable for long-line antennas, with manual day adjustment or automatic day adjustment..
  • You will receive the balun kits with the instructions.Or please contact the seller for the PDF instructions. Enjoy.Thank you.
  • It can withstand 100W-200W. It can easily produce high-performance balun to ensure efficient radio transmission and reception. It allows you to fully enjoy the fun of DIY..
Check Stock

1:1 Mini Balun, Consumer Electronics with Stable Performance for HF Shortwave Antenna for Outdoor QRP Station and Furniture

  • 【High Quality】The shell of the mini balun is made of hard plastic material, strong and durable, not easy to damage, has good performance and a long service life..
  • 【Feature】The withstand power of the 1:1 mini balun is 100W SSB, with small size and easy to disassemble, carry and store, can bring you more convenient..
  • 【Application】The balun has great workmanship, can perfect replacement for the old one, has a wide range use, suitable for outdoor setting and QRP use, very good electronic accessories..
  • 【Product Parameter】The QRP mini balun size is approximately 91 x 36 x 26mm / 3.6 x 1.4 x 1in (including terminals), and the housing size is approximately 61 x 36 x 26mm / 2.4 x 1.4 x 1 inch..
  • 【Quality Assurance】This video balun is manufactured under strict quality control and standard requirements, and has a high safety factor, so it can be used with confidence..
Check Stock

Mini Balun Consumer Electronics Suitable for HF Shortwave Antenna for Outdoor QRP Station and Furniture (1:9)

  • CHARACTERISTIC: The withstand power of the mini balun is 100W SSB, smoothly operation and good performance, with small size and easy to disassemble, carry and store..
  • PRACTICAL: The QRP mini balun is a bidirectional balanced to unbalanced converter, very practical, can be used for unbalanced output of sound reinforcement level audio equipment, etc..
  • HIGH QUALITY: The shell of the mini balun is made of hard plastic material, strong and durable, not easy to damage, has good performance and a long service life..
  • WIDE USE: The balun has great workmanship, can perfect replacement for the old one, has a wide range use, suitable for outdoor setting and QRP use, very good electronic accessories. For long‑term outdoor use, the upper and lower covers of the shell must be bonded and sealed with silica gel..
  • QUALITY ASSURANCE: The video balun is manufactured under strict quality control and standard requirements, and has a high safety factor, so it can be used with confidence..
Check Stock

Airband Aviation Radio Receiver DIY Kit, 118-136MHz AM High Sensitivity Radio Receiver DIY Kit, 12V Power Supply Airband Radio Reciever DIY Kit, for Between The Aircraft and The Tower

  • HAM Equipment 1-30Mhz Shortwave Radio Magnetic Balance Kits adopts large-size high-quality nickel-zinc magnetic ring, which can work in the short-wavelength range of 1-30MHz ..
  • 1:1 balun is suitable for bipolar DP antenna (inverted V positive V) antenna such as Yagi (40-100Ω). 1:4 balun for LOOP antenna and Winton antenna (200-400Ω)..
  • 1:9 balun is suitable for long-line antennas, with manual day adjustment or automatic day adjustment..
  • It can withstand 100W-200W. It can easily produce high-performance balun to ensure efficient radio transmission and reception. It allows you to fully enjoy the fun of DIY..
  • You will receive the balun kits with the instructions.Or please contact the seller for the PDF instructions. Enjoy.Thank you.
Check Stock

Malahit ATU-100 Antenna Tuner DIY Kits 1.8-50MHz atu100 Automatic Antenna Tuner by N7DDC 7×7 0.96 Inch OLED SMT and chip soldered 3.2 Version Firmware Programmed Unassembled

  • HAM Equipment 1-30Mhz Shortwave Radio Magnetic Balance Kits adopts large-size high-quality nickel-zinc magnetic ring, which can work in the short-wavelength range of 1-30MHz ..
  • It can withstand 100W-200W. It can easily produce high-performance balun to ensure efficient radio transmission and reception. It allows you to fully enjoy the fun of DIY..
  • 1:1 balun is suitable for bipolar DP antenna (inverted V positive V) antenna such as Yagi (40-100Ω). 1:4 balun for LOOP antenna and Winton antenna (200-400Ω)..
  • 1:9 balun is suitable for long-line antennas, with manual day adjustment or automatic day adjustment..
  • You will receive the balun kits with the instructions.Or please contact the seller for the PDF instructions. Enjoy.Thank you.
Check Stock

HAM Equipment 1-30Mhz Shortwave Radio Balun Kit NXO-100 Magnetic Balance Amateur Radio Antennas DIY

  • HAM Equipment 1-30Mhz Shortwave Radio Magnetic Balance Kits adopts large-size high-quality nickel-zinc magnetic ring, which can work in the short-wavelength range of 1-30MHz .This item needs to be assembled by the customer after purchase, please don't buy it if you mind! !.
  • It can withstand 100W-200W. It can easily produce high-performance balun to ensure efficient radio transmission and reception. It allows you to fully enjoy the fun of DIY..
  • 1:1 balun is suitable for bipolar DP antenna (inverted V positive V) antenna such as Yagi (40-100Ω). 1:4 balun for LOOP antenna and Winton antenna (200-400Ω)..
  • 1:9 balun is suitable for long-line antennas, with manual day adjustment or automatic day adjustment..
  • I send the instruction to your email when you buy . Many thanks for your purchasing..
Check Stock

Cable Matters HDMI Extender Balun - Wall Mount HDMI Over Ethernet Extender with TCP/IP Support for 1-to-Many Setup 1080p 60Hz up to 328 Feet (100m) - Support Local Monitor Loop-Out

  • Extend any audio/video HDMI connection between a computer, Blu-ray player, media streamer, or gaming console to a HDTV, monitor or projector over a single Cat 6 UTP/STP cable with this HDMI to Ethernet adapter converter.
  • HDMI over Cat5e/Cat6 cabling operates up to 328 feet.
  • HDMI Balun Extender boxes are surface mountable with included brackets and screws.
  • The HDMI over Ethernet extender comes with bonus 2-Pack of High Speed HDMI cables.
  • Connect the HDMI Ethernet extender directly with a single cable or through a dedicated unmanaged network switch over Cat 6 cabling.
  • Do not connect through a LAN or router with other data traffic.
  • Connect up to 8 additional displays by adding Receiver Boxes (sold separately) through an unmanaged, dedicated Gigabit Ethernet network switch without QoS such as the TP-LINK TL-SG1005D Gigabit Desktop Switch.
  • Lab tested with the TRENDnet 8-Port Unmanaged Gigabit Switch, TEG-S81g.
  • Control a DVD player or other HDMI video source from a remote location with the included IR cables that forward commands over a dedicated DDC channel for convenience and security.
  • The Ethernet to HDMI adapter converter is compatible with HDCP compliant equipment for viewing copy protected content and integrating with HDMI switch, splitter, or matrix e....
Check Stock

AEcreative 10-160 Meter Amateur ham HF Band Radio Wire Loop Antenna Balun Unun DIY kit T200-2 Type 2 Iron Powder ferrite toroid 2" core 16AWG Enameled Magnet Winding Wire 1.5KW

  • Please note: this listing is build kit hardware only, we do not provide build plan, included all hardware to build your own high power Balun/Unun up to 1.5KW, for make 1:1, 4:1 or 9:1 Balun/UNUN as desired..
  • Precise pre drilled waterproof balun box, T200-2 type 2 iron powder toroid 2" core, (optimum resonant freq range 0-40Mhz)..
  • 10' 16AWG 1.30mm Enameled Magnet Winding Wire, (Temperature Rating 155℃), nickel plated brass conectors..
  • Balun box dimension: 3 1/4" x 3 1/8" x 2 1/8".
  • Package included (Unassembled kit) : 1x t200-2 toroid, 1x SO-239 antenna socket, 2x antenna wire connector (fit up to 8awg antenna wire), nuts, bolts,washers, wire terminals included..
Check Stock