Reviews Esp826deauthers

AURSINC WiFi Deauther Watch V3 ESP8266 Programmable Development Board | Wearable Smartwatch | OLED&Laser | Attack/Control/Test Tool|LOT for DSTIKE NodeMCU

• ORIGIN DSTIKE Watch V3, with better performance and appearance than V1&V2, is wrapped by the Arcylic cover and 3D print transparent case, moreover, equiped with upgraded software system, which is easier to operate..
• WiFi Test Tool: installed with the latest ESP8266 Deauther software, the deauther watch can perform different secure tests for your WiFi networks, equiped with 5dB FPC antenna. NOTE: ESP8266 supports 2.4GHz only..
• Extensible: Deauther wathch V3 also can be used to develop your own software, it is indeed a ESP8266 development board, easy to operate..
• LONG WORKING TIME: DSTIKE Deauther watch has a built-in an 800mAh battery, the maximum working time of the WiFi Deauther wristband reaches 8 hours, also the battery can be charged while in use. Moreover, the watch is equiped with OLED display and a 3-way momentary slide switch..
• NOTE: the wifi deauther watch can be used only for testing and educational purposes on your own devices! Firmware and Software download please refer to the below description..

AURSINC WiFi Deauther DSTIKE Mini ESP8266 Development Board with 1.3inch OLED Display

• Latest Software: installed with the latest ESP8266 Deauther software. With this software, you can perform different secure tests for your WiFi networks. NOTE: ESP8266 supports 2.4GHz only..
• Password:deauther ； https:// github. com/spacehuhn/esp8266_deauther/wiki/FAQhow-to-do-a-reset..
• Power Saving and Safe: Low Voltage Low-Dropout Regulator, Short Protection, Over-Charging Protection, Over-Temperature Protection..
• NOTE: Use it only for testing and educational purposes against your own devices! Any questions or problems, please feel free to contact us..

MakerFocus WiFi Test Tool ESP8266 WiFi Deauther Watch DSTIKE NodeMCU ESP8266 Programmable Development Board Built in 500mAh Battery with OLED Dispaly, Wristband and 3D Printing Case

• Deauther Watch: It is an ESP8266 development board, but you can wear it like a smartwatch, more convenient. NOTE: Using it only for testing and educational purposes against your own devices!.
• Wifi Testing Tool: This esp8266 dev board is installed with the latest ESP8266 Deauther software. With this software, you can perform different secure tests for your WiFi networks. NOTE: ESP8266 supports 2.4GHz only.
• Long Working Time: Built-in an 500mAh lithium battery, working time up to 7 hours. Comes with OLED display and a 3 way momentary slide switch.
• Extension Board: You can use it to develop your own software. It is indeed a ESP8266 development board and easy to operate.
• Disclaimer: This is a tool. It's neither good nor bad. Use it to do good, to study and to test. Never use it to do harm or create damage! Use it only for testing and educational purposes against your own devices! I don't take responsibility for what you do with it. Please check the legal regulations for your country to make sure you don't violate any laws.

MakerFocus WiFi Test Tool ESP8266 WiFi Deauther Watch V2 DSTIKE NodeMCU ESP8266 Programmable Development Board Built in 800mAh Battery with OLED Dispaly, Wristband and 3D Printing Case

• Deauther Watch: It is an ESP8266 development board, but you can wear it like a smartwatch, more convenient. The link to the code and video is obtained in the product description.
• Wifi Tes ting Tool: This esp8266 dev board is installed with the latest ESP8266 Deauther software. With this software, you can perform different secure tests for your WiFi networks. NOTE: ESP8266 supports 2.4GHz only!.
• Extension Board: You can use it to develop your own software. It is indeed a ESP8266 development board and easy to operate..
• Long Working Time: Built-in an 800mAh lithium battery, working time up to 8-10 hours. Comes with OLED display and a 3 way momentary slide switch..
• Disclaimer: This is a tool. It's neither good nor bad. Use it to do good, to study and to test. Never use it to do harm or create damage! Use it only for testing and educational purposes against your own devices! I don't take responsibility for what you do with it. Please check the legal regulations for your country to make sure you don't violate any laws..

MakerFocus ESP8266 Development Board DSTIKE W i F i Deauther Mini with 1.3inch OLED Display V2.0.5 Software Onboard and 2dB Antenna, Protecting Short, Over-Charging, Over-discharging and Temperature

• it installs the latest ESP8266 Deauther software. Using this software, you can perform different attacks to test WiFi networks. Please note that ESP8266 only supports 2.4GHz. For more detailed information about the software, please visit the product operation link guide below the product.
• Product use link, password reset link, lost password, get it from the product description.
• ESP8266 development board: You can also use it to develop your own software. It is simple to use, just like any other ESP8266 development board.
• LM39100 Low Voltage Low-Dropout Regulator.
• TP4056+PL5353A battery protection solution.
• Protection: short, over charging, over discharging, temperature.
• We Have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking forward to your consultation.

MakerFocus WiFi Test Tool ESP8266 WiFi Deauther Watch V3 DSTIKE NodeMCU ESP8266 Programmable Development Board Built in 800mAh Battery with OLED Dispaly, Wristband and 3D Printing Case

• Product operation link, available in the product guide and documentation.It is an ESP8266 development board, but you can wear it like a smartwatch, more convenient.
• Wifi Testing Tool: This esp8266 dev board is installed with the latest ESP8266 Deauther software. With this software, you can perform different secure tests for your WiFi networks. NOTE: ESP8266 only supports 2.4GHz.
• Extension Board: You can use it to develop your own software. It is indeed a ESP8266 development board and easy to operate.
• Long Working Time: Built-in an 800mAh lithium battery, working time up to 8-10 hours.
• Usage: Using it only for testing and educational purposes against your own devices! Never use it to do harm or create damage!.

YLKOVA ESP8266 Programmable Development Board WiFi Test Tool ESP8266 WiFi Deauther Watch DSTIKE NodeMCU Built in 500mAh | Wearable | OLED | Attack/Control/Test Tool | Battery with OLED Display

• ⌚【YLKOVA WATCH】It is an ESP8266 development board, but you can wear it like a smartwatch, more convenient. Note:This project is a proof of concept for testing and educational purposes. Neither the ESP8266, nor its SDK was meant or built for such purposes..
• ⌚【LONG WORKING TIME】Built-in an 500mAh lithium battery, Only 80mA power usage, working time up to 3-4 hours. Comes with OLED display..
• ⌚【WIFI TESTING TOOL】This ESP8266 development board is installed with the latest ESP8266 Deauther software. With this software, you can perform different secure tests for your WiFi networks..
• ⌚【EXTENSION BOARD】You can use it to develop your own software. It is indeed a ESP8266 development board and easy to operate. NOTE: ESP8266 supports 2.4GHz only..
• ⌚【DISCLAIMER】This project is a proof of concept for testing and educational purposes. Neither the ESP8266, nor its SDK was meant or built for such purposes. Bugs can occur! Use it only against your own networks and devices! Please check the legal regulations in your country before using it. We don't take any responsibility for what you do with this program..

MakerFocus WiFi Test Tool ESP8266 WiFi Deauther Watch V3 DSTIKE NodeMCU ESP8266 Programmable Development Board & ESP8266 WiFi Module ESP8266 WiFi Deauth Detector V3 (Pre-flashed) with Buzzer RGB LED

• Product operation link, available in the product guide and documentation.It is an ESP8266 development board, but you can wear it like a smartwatch, more convenient.
• Wifi Testing Tool: This esp8266 dev board is installed with the latest ESP8266 Deauther software. With this software, you can perform different secure tests for your WiFi networks. NOTE: ESP8266 only supports 2.4GHz.
• Extension Board: You can use it to develop your own software. It is indeed a ESP8266 development board and easy to operate Long Working Time: Built-in an 800mAh lithium battery, working time up to 8-10 hours.
• Please get the documentation from the Product guides and documents below: It will tell you What is wifi deauthentication attack, USB attack firmware, the way to RGB LED Test: You have to install Adafuit RGB LED library first. and CP2102 Driver Download link.
• It is a device which could detect a WiFi deauthentication attack.It is also an ESP8266 starter kit, you can use it learn esp8266. You can start from how to control the highlight LED or RGB LED..

BuddyGoody - Tested Deauther Plug & Play WIFI NodeMCU Lua ESP8266 ESP-12E CH340G - Flashed

Kodak 10xl Ink Cartridge - Black Pack of 2

• for use in EasyShare 5100, EasyShare 5300, EasyShare 5500, ESP Office 6150, ESP 3, ESP 5, ESP 7, ESP 9, ESP 3250, ESP 5210, ESP 5250, ESP 7250, ESP....
• The use of aftermarket replacement cartridges and supplies does not void your printer's warranty.

DORHEA ESP8266 Code Burner Firmware Downloader Flash Download Tool Test Board + 5pcs ESP-12E ESP12E WiFi Module, Wireless Transmission Serial Transceiver Receiver

• ESP8266 ESP-12E WiFi serial module built-board PCB antenna, 4M bytes Flash.
• Frequency range: 2.4GHz-2.5GHz (2400M-2483.5M)..
• The ESP8266 test board code burner flash downloader compatible with ESP-01 ESP-01S ESP-07 ESP-07S ESP-12E ESP-12F ESP-12S ESP-F. Micro USB interface, this module is very easy to program..
• ESP8266 code burner firmware downloader all IO ports have been drawn out and can be used as ZUI small system development board or small batch burning fixture. The board supports one-click firmware download function, and add burning..
• Easy to use: ESP8266-12E is a combined products,it's very convenient to operate(Need to solder 3V regulator by youself )..
• ESP8266-12E is an enhanced version ESP8266-12, improving the external circuit, enhanced impedance signal output is better, whether it is stable or anti-jamming capability , have been greatly improved..

PK-Power AC Adapter for Kodak ESP Office 2170 2150 ESP2150SE All-in-One CAT 1k7602 Kodak ESP C310 C315 All-in-One Kodak ESP Office 3250 5250 6150 All-in-One Inkjet Printer

• Input: 100-240V 50-60Hz Output: 36V 2.1A pls kindly contact with us if you can not make sure, thanks.
• PK-Power products are CE / FCC / RoHS certified, tested by the manufacturer to match and / or exceed the OEM specifications.
• OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP: Short Circuit output Protection).
• COMPATIBILITY: AC Adapter For Kodak All-in-One Printer ESP6150 ESP5350 ESP 5 ESP 7 ESP 9 ESP C310 ESP C315 ESPC310 ESPC315 ESP6100 ESP7200 ESP9200....
• Compatibility:Kodak ESP 9 All-in-One Printer /Kodak ESP C310 ESP C315 ESPC310 ESPC315 All-in-One AIO Printer 1985613.

UpBright 36V AC/DC Adapter Compatible with Kodak HP-A0601R3 ESP 2150 3250 5300 5500 3/5/7/9 Hero 5.1 6.1 7.1 9.1 1k7602 Printer APD DA-74A36 DA-60A36 Delta EDPA-108BB A LITEON PA-1800-01HK-ROHS 1K2998

• World Wide Input Voltage 100-240VAC 50/60Hz.OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP:....
• UpBright New Global 36V AC / DC Adapter Compatible with DC36V Kodak ESP Office 2170 2150 3250 5250 6150 5000 5100 5200 5300 5500 3/5/7/9 Series Hero....
• Compatible with: Kodak Easyshare ESP Office ESP 3/5/7/9 series ESP-3 ESP-5 ESP-7 ESP-9 ESP3 ESP5 ESP7 ESP9 ESP 3.2 32 ESP3.2 ESP32 2100 2150 5210 5260....
• Compatible with: APD DA-60A36 DA-18A36 DA-74A36 DA60A36 DA18A36 DA74A36 Asian Power Devices AcBel AD9024 P/N: EADP-108AB A EADP-108ABA PN....
• Fits: Kodak HP-A0601R3 HPA0601R3 P/N: VP-09500084-000 1K5669 1K5667 1K2866 1K5862.
• Kodak Hero 3.1, 5.1, 6.1, 7.1, 9.1 91 All-in-One Multifunction....