Reviews Esp8266 Wifi Module

ESP8266 ESP-12E NodeMcu Lua WiFi Module Connector Development Board, for Arduino IDE Micropython

  • ESP8266 CP2102 NodeMCU ESP-12E WIFI serial wireless module is an open source Lua based firmware, ultra low cost WI-FI modules, development boards for rapid prototyping, integrated with ESP8266 WIFI chips..
  • Use interactive Lua scripts to write hardware code for Arduino, it offers a complete and self-contained Wi-Fi networking solution..
  • ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIO..
  • The NodeMCU ESP8266 development board programming model is similar to that of Node.js, more open source and interactive, programmable, simple, 4-layer PCB design, small size..
  • The has integrating GPIO, PWM, IIC, 1-Wire and ADC all in one board, without having to press the flash and reset buttons before each flash operation,simultaneity support smart link smart networking..
Check Stock

AITRIP 5 PCS ESP8266 NodeMCU V3 CP2102 ESP-12F 4M Bytes Internet of Things WiFi Development Board Serial Wireless Module for Arduino IDE Micropython

  • There is the way to guide you to use the new version: The command you needed to use is: esptool.py --baud 115200 --port /dev/tty.SLAB_USBtoUART write_flash -fs 32m -ff 80m --flash_mode dio 0x00000 boot_v1.7.bin 0x1000 user1.bin 0x37c000 esp_init_data_default.bin 0x37e000 blank.bin The important part is “—flash mode dio”.
  • ESP8266 CP2102 NodeMCU LUA ESP-12F WIFI Serial Wireless Module.
  • Compatible with Arduino, works great with the latest Compatible with Arduino IDE/Mongoose IoT/Micropython.
  • SP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor..
  • 5pcs ESP8266 CP2102 NodeMCU LUA ESP-12F WIFI Serial Wireless Module.
Check Stock

AITRIP 5 PCS ESP8266 NodeMCU CP2102 ESP-12E Internet WiFi Development Board Open Source Serial Wireless Module Works Great Compatible with Arduino IDE/Micropython (5PCS)

  • There is the way to guide you to use the new version: The command you needed to use is: esptool.py --baud 115200 --port /dev/tty.SLAB_USBtoUART write_flash -fs 32m -ff 80m --flash_mode dio 0x00000 boot_v1.7.bin 0x1000 user1.bin 0x37c000 esp_init_data_default.bin 0x37e000 blank.bin The important part is “—flash mode dio”.
  • ESP8266 CP2102 NodeMCU LUA ESP-12E WIFI Serial Wireless Module.
  • Compatible with Arduino, works great with the latest Compatible with Arduino IDE/Mongoose IoT/Micropython.
  • SP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor..
  • 5pcs ESP8266 CP2102 NodeMCU LUA ESP-12E WIFI Serial Wireless Module.
Check Stock

Dorhea 4Pcs ESP8266 ESP-12F WiFi Serial Module Microcontroller 802.11N Development Board Wireless Transceiver Remote Port Network Module for NodeMCU MicroPython

  • The ESP-12F module combines the ESP8266 microcontroller with 4MB of flash and a PCB antenna, with 16-bit Lite mode, clocked at Supports 80 MHz and 160 MHz, supports RTOS, and integrates Wi-Fi MAC/BB/RF/PA/LNA..
  • The ESP-12F WiFi module supports the standard IEEE802.11 b/g/n protocol, a complete TCP/IP protocol stack. Users can use this module to add networking capabilities to existing devices or to build separate network controllers..
  • The default firmware can add WIFI capability to another microcontroller, but it really shines when loaded with MicroPython, or NodeMCU..
  • The ESP-12F is an improved version of the 12E, improve the peripheral circuit, the four laminates plate process, enhanced impedance matching, signal output is better, It is pin compatible with enhanced stability and a better antenna..
  • Not recommended for users who are new to the ESP8266. New users should instead look at development boards with integrated USB..
Check Stock

Acxico 2 pcs ESP8266 ESP-01S + 5V WiFi Relay Module Smart Home Remote Control Unlock Board

  • This module uses genuine relays and normally open interfaces. High stability and low power consumption..
  • Strong driving ability, stable and reliable performance. High efficiency, fine workmanship, and durable..
  • Add one more ESP-01S module. This smart relay module is based on the ESP-01S WIFI module design. It can be used to DIY your own smart switch. It can be remotely controlled by the mobile phone APP and provides APP and LUA source programs. It's easy to use right away..
  • The package includes：2 pcs ESP8266 ESP-01S Relay module, relay WIFI smart socket (with ESP-01S).
  • We are very grateful for all customers’ opinions to improve sales, if you are not satisfied, please contact us to find the best solution.
Check Stock

AITRIP 6pcs D1 Mini NodeMCU ESP32 ESP-WROOM-32 WLAN WiFi Bluetooth Development Board 5V Compatible with Arduino

  • Wireless WiFi Bluetooth 2 in 1 dual-core CPU module MINI KIT ESP32 module development board module.
  • 100% compatible with Arudino IDE, Lua and Micropython.
  • Designed with ultra-low power technology, it offers the full range of performance and features of the ESP32 chip. The pin arrangement provides compatibility with the modules developed for the D1 Mini ESP8266 while also offering fast WLAN, enhanced GPIO, Bluetooth functionality.
  • All I/O pins have interrupt, PWM, I2C and one-wire capability, except the pin DO.
  • It has a similar pin layout to the conventional D1 Mini ESP8266-12F and is therefore pin-compatible with most accessories for it..
Check Stock

ARCELI ESP-12E ESP8266 UART WiFi Wireless Shield Compatible with Arduino UNO R3

  • Standard pin interface to achieve full compatibility with the pitch Arduino Uno, Mega and so on. (Unless the standard size arduino, such as Nano, Mini).
  • 3.3V power supply using advanced chip (with the official expansion board power chip CC3000 same), so 3.3V Arduino board provided more accurate, so ESP8266 as official cc3000 chip work as normal, there is no gap..
  • It leads to a WiFi module power supply / service interface to facilitate developers to extend the power supply and maintenance..
  • Onboard ESP8266-12 stable industrial grade serial WiFi module, using an enhanced PCB antenna, signal better..
Check Stock

AITRIP 10PCS ESP8266 NodeMCU LUA CH340 ESP-12E WiFi Internet Development Board 4M Flash Serial Wireless Module for Arduino IDE/Micropython

  • ESP8266 CH340 CH340G NodeMCU LUA ESP-12E WIFI Serial Wireless Module.
  • Built-in Micro-USB, with flash and reset switches, easy to program.
  • Compatible with Arduino IDE/Mongoose IoT/Micropython.
  • ESP8266 CH340 chip, power your development in the fastest way combinating with NodeMcu Firmware.
  • It's a IOT unit with all available resources on board, support smart link and smart networking..
  • ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area..
Check Stock

HiLetgo 3pcs ESP32 Mini ESP-WROOM-32 Development Board WLAN WiFi Bluetooth IoT Development Board

  • ESP32 Mini development board, everything needed to program the ESP32 module, ESP32/32S WIFI Development Bluetooth ESP8266 Module CP2104 for Arduino IDE..
Check Stock

MakerFocus WiFi Test Tool ESP8266 WiFi Deauther Watch V3 DSTIKE NodeMCU ESP8266 Programmable Development Board & ESP8266 WiFi Module ESP8266 WiFi Deauth Detector V3 (Pre-flashed) with Buzzer RGB LED

  • Product operation link, available in the product guide and documentation.It is an ESP8266 development board, but you can wear it like a smartwatch, more convenient.
  • Wifi Testing Tool: This esp8266 dev board is installed with the latest ESP8266 Deauther software. With this software, you can perform different secure tests for your WiFi networks. NOTE: ESP8266 only supports 2.4GHz.
  • Extension Board: You can use it to develop your own software. It is indeed a ESP8266 development board and easy to operate Long Working Time: Built-in an 800mAh lithium battery, working time up to 8-10 hours.
  • Please get the documentation from the Product guides and documents below: It will tell you What is wifi deauthentication attack, USB attack firmware, the way to RGB LED Test: You have to install Adafuit RGB LED library first. and CP2102 Driver Download link.
  • It is a device which could detect a WiFi deauthentication attack.It is also an ESP8266 starter kit, you can use it learn esp8266. You can start from how to control the highlight LED or RGB LED..
Check Stock

SHT31 Temperature & SHT31-D Humidity Sensor Module Breakout Weather for Arduino

  • The ESP8266 Weather Station IoT Starter Kit includes an ESP8266 ESP-12E Development Board, a 0.96" OLED display, a DHT11 Temperature and Humidity....
  • Developer-friendly module ESP8266 come with a USB connector and the maximum number of available pins. ESP8266 full IO mouth leads directly download....
  • The 0.96" 128x64 pixel OLED display supports I2C, wide viewing angle, low power consumption and high response speed.
  • DHT11 Temperature and Humidity Sensor with characteristics humidity measurement range: 20~90% RH, humidity measurement accuracy: +/-5% RH, temperature....
  • Four Projects in One – The ESP8266 and Wireless IoT development lets you 4 home projects, including weather station, plane spotter, world clock and....
Check Stock

YLKOVA ESP8266 Programmable Development Board WiFi Test Tool ESP8266 WiFi Deauther Watch DSTIKE NodeMCU Built in 500mAh | Wearable | OLED | Attack/Control/Test Tool | Battery with OLED Display

  • ⌚【YLKOVA WATCH】It is an ESP8266 development board, but you can wear it like a smartwatch, more convenient. Note:This project is a proof of concept for testing and educational purposes. Neither the ESP8266, nor its SDK was meant or built for such purposes..
  • ⌚【LONG WORKING TIME】Built-in an 500mAh lithium battery, Only 80mA power usage, working time up to 3-4 hours. Comes with OLED display..
  • ⌚【WIFI TESTING TOOL】This ESP8266 development board is installed with the latest ESP8266 Deauther software. With this software, you can perform different secure tests for your WiFi networks..
  • ⌚【EXTENSION BOARD】You can use it to develop your own software. It is indeed a ESP8266 development board and easy to operate. NOTE: ESP8266 supports 2.4GHz only..
  • ⌚【DISCLAIMER】This project is a proof of concept for testing and educational purposes. Neither the ESP8266, nor its SDK was meant or built for such purposes. Bugs can occur! Use it only against your own networks and devices! Please check the legal regulations in your country before using it. We don't take any responsibility for what you do with this program..
Check Stock

AITRIP 5PCS D1 Mini Pro 16MB ESP8266 ESP-8266EX CP2104 WiFi External Antenna Connector Micro USB Serial Converter IoT Development Board PWM/12C/1-Wire Compatible with Arduino

  • D1 Mini Pro is a mini WiFi board with 16MB(128M bit) flash, external antenna connector and built-in ceramic antenna based on ESP-8266EX. It offers a complete and self-contained WiFi networking solution..
  • External antenna connector；Built-in ceramic antenna.
  • The ESP8266 is an all-rounder and a very popular WiFi enabled micro-controller. AITRIP D1 Mini Pro is very similar to the traditional D1 Mini. However, this latest version has been fundamentally revised.
  • The ESP2866 D1 Mini Pro is smaller and lighter.
  • Same size as D1 mini, but more light，Compatible withMicroPython and NodeMCU.
  • The D1 Mini Pro module has 11 digital I/O pins and all pins support interrupt/ pwm/ I2C/ 1 wire/ 1 analogue input (3.2 maximum input). It stands out for having an external antenna connector..
Check Stock