Reviews Esd Rubber Mats

Anti Static Mat - BTSHOW Soldering Mat for PC Building Heat Resist 954°F - ESD Safe Desktop Project Repair Mat Use for Soldering,13.8\ x 9.8\ (10^4-10^6 ohms Resistivity)

  • ...ot antisatic without a grouding cord.)Suitable for semiconductor/hard disk drive industry and other static controlled environments..
  • HEAT RESISTANT MAT for Soldering:Resist 954°F(530°C) to avoid damage on especially wood desk or maintenance platform and increase working rate.More heat resistant than vinyl mats and rubber mats. Ideal for Soldering Electronics Assembly or Electronics and Circuit Board Repair..
  • RESISTIVITY: The whole silicone mat has 10^4 - 10^6 ohms.Much More heat resistant than vinyl mats and rubber mats,and much better anti-static function than rubber mats,designed by fixers,for fixers.Easy clean-Both top and bottom were sprayed with dustproof oil which magnets no dusts.We expect your verification..
  • RoHs COMPLAINT: Imported silicone material added some carbon particles(so this soldering mat is anti-static),non-toxic,no smell,meet FDA food standard,corrosion resistant,both sides are antistatic,heat resistant,anti-slip,dustproof and durable, can fold, stretch ensure that it can maintain good daily use,easily cleaned nice with soap and water or even rubbing alcohol,up to 10 years long life span if in standard use..
  • WHAT YOU GET:1 X Anti-static soldering mat, friendly customer service from BTSHOW..
Check Stock

Alphastat Table Mat Grounding Kit - Universal Snap Kit and 15' 1 Meg Male Low Profile Ground Cord

  • TABLE MAT GROUND: A complete kit to install and ground ESD and Anti-Static table mats according to ANSI ESD S2020..
  • THICK OR THIN MATS: The kit includes a Universal Snap Kit that can install a 10mm snap or stud into materials up to 0.375" thick mats. Comes with a low profile Common Point Ground Cord that snaps to the mat and provides two banana jack receptacles to ground two operators working at the station..
  • EASY INSTALLATION: The snap kit is installed into the mat with Philips head screw driver. The ground cord connects to that snap and the opposite end is connected to the center screw of an outlet.
  • MEETS ESD STANDARDS: A buried 1 meg resistor is included for safety. ESD Standards require 1 ground point per mat or every 10ft of ESD matting. Meets or exceeds requirements of ANSI ESD-S20.20 and ANSI/ESD S-6.1..
  • Comes with a low profile Common Point Ground Cord that snaps to the mat and provides two banana jack receptacles to ground two operators working at the station..
Check Stock

QWORK Grounding Mat, 20'' x 27.5'', ESD High Temperature Mat Kit, Anti Static Mat

  • Complete ESD Anti-static Kit: (1) 20'' x 27.5'' ESD mat with two built-in grounding snaps, (1) 6 FT attachable grounding cord with removable alligator clip..
  • ESD Safe: The ESD mat is .080” (2mm) thick, dual sided, and made of a static dissipative, industrial grade elastomer. Anti-static mat is resistant to acid, alkali, chemical soldering flux, wear-resisting and easy to clean..
  • Soft: The material is as durable as rigid laminates, and as comfortable and appealing as softer rubber or vinyl mats. Conveniently folded into the bag. 0.080-inches (2mm) thickness allows mat to remain flat and prevents curled edges. 0.05 second decay time ensures rapid, safe static drain..
  • Healthy: Durable surface withstands high temperatures, solder, flux, and harsh chemicals. Low out gassing and VOC are ideal for clean-rooms and other controlled environments. No vinyl monomers or DOP ensures conformity to personal and environmental safety standards..
  • 100% Satisfied Service: each one defective item can have the free replace or refund, need more help please feel free to contact us, we will try our best to assist you..
Check Stock

Grounding Snap with ESD Grounding Plug for Universal Grounding Table Mat, Universal Snap Kit and 16ft Grounding Cord Makes Perfect Grounding Wire Kit in ESD Supplies, ESD Grounding Kit & Ground Cord

  • Very easy to install. The anti static plug can be connected to all esd mats. Simple to poke a hole and put the bolt through to add the snap, makes sufficient electrical connection..
  • Very handy for grounding earthing universal mat. Now you have the capability of installing a esd cord on any anti static mat or universal grounding mat..
  • Grounding snap. Make yourself an ESD work station to prevent static electricity from damaging ESD sensitive components. For work on computers or sensitive devices.
  • ESD grounding wire kit. Including a 16ft long 100K Ohm Grounding cord with grounding plug and screwdriver. It's a ground only plug with cord snap and a long earthing cable..
  • No matter whether thin grounding mats or thick esd grounding mat. The ESD kit includes 2 washers. this means that the grounding button fits on every mat..
Check Stock

High Temperature Soldering Mat, 118'' x 28'' Anti-Static Table Mat, Heavy Duty Non-Slip Rubber Workstation Mats Grounding Desk Pad for Soldering Iron, Sensitive Electronics Working

  • Complete ESD Anti-static Kit: (1) 20'' x 27.5'' ESD mat with two built-in grounding snaps, (1) 6 FT attachable grounding cord with removable alligator clip..
  • ESD Safe: The ESD mat is .080” (2mm) thick, dual sided, and made of a static dissipative, industrial grade elastomer. Anti-static mat is resistant to acid, alkali, chemical soldering flux, wear-resisting and easy to clean..
  • Soft: The material is as durable as rigid laminates, and as comfortable and appealing as softer rubber or vinyl mats. Conveniently folded into the bag. 0.080-inches (2mm) thickness allows mat to remain flat and prevents curled edges. 0.05 second decay time ensures rapid, safe static drain..
  • Healthy: Durable surface withstands high temperatures, solder, flux, and harsh chemicals. Low out gassing and VOC are ideal for clean-rooms and other controlled environments. No vinyl monomers or DOP ensures conformity to personal and environmental safety standards..
  • 100% Satisfied Service: each one defective item can have the free replace or refund, need more help please feel free to contact us, we will try our best to assist you..
Check Stock

ESD-Dissipative Mat Kit - Heat Resistant, Two Layer Natural Rubber - with a Wrist Strap, Grounding Cable, and Dual Bench Grounding (2.5ft x 2ft, True Green)

  • ESD Mats meet the ESD work surface requirements of ANSI/ESD S20.20 and recommendation of ESD S4.1..
  • Grounding Cable meets or exceeds requirements of ANSI ESD-S20.20 and ANSI/ESD S-6.1..
  • Static dissipative materials are able to conduct electricity, but do so very slowly. Any built-up static charges dissipate without sudden discharge that can harm the internal structure of silicon circuits..
  • Grounding: this material must be properly grounded for optimum electrical performance..
Check Stock

MWRF Source ESD Mat Kit with Wrist Strap and Grounding Cord (18" x 47", Gray)

  • ESD Mat Size: 18 Inches x 47 Inches x 0.06 Inches (Thickness).
  • ESD Mat Surface Resistivity: 10e9 - 10e10 ohms.
Check Stock

Bertech ESD Soldering Mat Roll, Blue

  • STRONG WORKSTATION PAD: Designed for electronic assembly, this grounding mat offers excellent resistance to oil, grease, most common solvents, hot solders, and soldering irons.
  • comes with a wrist strap, alligator clip, and ground cord.
  • DURABLE MATERIAL: Made of a two-layered rubber with ESD properties.
  • the top one is a blue static dissipative rubber layer laminated to a black conductive rubber bottom layer.
  • MULTI-PURPOSE: For use in aerospace assembly, electronic manufacturing, electronic repairs, fiber optics, hospitals, medical assembly, and soldering in high-temperature setting.
  • SPECIFICATIONS: Mat is 0.06 inches thick, 24 inches wide, and 48 inches long with a resistance to ground and point-to-point of 1 x 10e3–10e5.
  • SAFETY COMES FIRST: Bertech is a leading source of Electrostatic Discharge Products (ESD), Kapton Tapes, and Finger Cots.
  • we also produce customized kits to meet our customers' specific requirements.
Check Stock

ModRight Xtreme Super Large Anti-Static Mod-Mat Work and Assembly Surface Over 47 x 23 in Size

  • 【WHY Choose US】The Professional ESD Knowledge Printing on the surface which makes people Feel High-tech and Pleasant. It helps you to know more....
  • 【Conductive and Texture】ESD Bench Mat Size is 36*24 Inch, Both side are conductive with Surface Resistance of 10^3 - 10^5 ohms. The front side is....
  • 【WIDELY USED】It is an ideal repair tools for soldering electronics assembly or circuit board and electronics repair, specially suitable for smart....
  • 【NON-TOXIC AND EASY TO CLEAN】 ESD Bench mat is made of high quality new rubber. Non-toxic, no harmful to human body. And the mat is very flexible....
  • 【WHAT YOU GET】Comes with a US Grounding Plug, a ESD Wrist Strap and Grounding Cord with 2 Holes. The anti static Mat is mounted 2pcs 10mm Male....
Check Stock

ESD Grounding Cable with Alligator Clip - 8 Feet - Ground Cable Cord with Clip, Earthing, Grounding, ESD, Static Control, EMF Radiation Fabrics, Plug into Your Outlet Grounding Adapter

  • ...vices. The ground wire is an excellent way to eliminate static from groundable objects and electricity from your body. Good absorption of electromagnetic waves from smart meter guard, computers, wifi or other electronic devices..
  • 8 FT LONG GROUND CABLE - The grounding cord is 8ft long and can easily connect earthing mats, shoes, pc, gloves, computer, half sheet, beds laptop pads anti static wrist, strap, band, wall shields floor or equipment..
  • ANTI STATIC TESTED AND APPROVED – The high-quality wire cord is durable and strong for all applications including industrial use. The high quality alligator clip makes a strong electrical connection on mats, conductive fabrics, wrist straps, and more. Easily ground the wire by plugging into a grounding adapter in an electrical outlet..
  • PERFECT FOR EARTHING/ GROUNDING - Just plug into an outlet ground adapter and clip to the fabric and you are done! The cord 2.5 mm polyurethane coil insulation offers excellent protection and cord life..
  • EASY 2 STEP INSTALLATION – Simply plug into an outlet ground adapter and clip the banana plug on the other end onto your earthing device. The quickest and simplest way to ground/earth for protection against ESD, EMI, or other negative effects from isolation from earth..
Check Stock

Bertech ESD Soldering Mat Roll, Blue 2' Wide x 10' Long x 0.06" Thick

  • STRONG WORKSTATION PAD: Designed for electronic assembly, this grounding mat offers excellent resistance to oil, grease, most common solvents, hot solders, and soldering irons.
  • DURABLE MATERIAL: Made of a two-layered rubber with ESD properties.
  • the top one is a blue static dissipative rubber layer laminated to a black conductive rubber bottom layer.
  • MULTI-PURPOSE: For use in aerospace assembly, electronic manufacturing, electronic repairs, fiber optics, hospitals, medical assembly, and soldering.
  • SPECIFICATIONS: Mat is 0.06 inches thick, 24 inches wide, and 10 feet long with a resistance to ground and point-to-point of 1 x 10e3–10e5.
  • SAFETY COMES FIRST: Bertech is a leading source of Electrostatic Discharge Products (ESD), Kapton Tapes, and Finger Cots.
  • we also produce customized kits to meet our customers' specific requirements.
Check Stock

CHAIRLIN 2 Packs Waterproof Large Shoe Tray All Purpose in Door and Out Door Boot Mat for Entryway Pet Food Tray Floor Protection Durable Shoe Organizer 30 x 15 x 1.2

  • 【WHY Choose US】The Professional ESD Knowledge Printing on the surface which makes people Feel High-tech and Pleasant. It helps you to know more....
  • 【Conductive and Texture】ESD Bench Mat Size is 36*24 Inch, Both side are conductive with Surface Resistance of 10^3 - 10^5 ohms. The front side is....
  • 【WIDELY USED】It is an ideal repair tools for soldering electronics assembly or circuit board and electronics repair, specially suitable for smart....
  • 【NON-TOXIC AND EASY TO CLEAN】 ESD Bench mat is made of high quality new rubber. Non-toxic, no harmful to human body. And the mat is very flexible....
  • 【WHAT YOU GET】Comes with a US Grounding Plug, a ESD Wrist Strap and Grounding Cord with 2 Holes. The anti static Mat is mounted 2pcs 10mm Male....
Check Stock

KEEN Utility mens Sparta Low Alloy Toe Esd Work Shoe, Black/Grey Flannel, 10.5 Wide US

  • Alloy Toe: Left and right asymmetrical aluminum safety toes weigh 35% less than steel toes, and meet or exceed ASTM F2412 and F2413 ESD 100 standards.
  • ESD Shock Reduction: Electro static dissipative (ESD) footwear is constructed to reduce excess static electricity by conducting the charge from the body to the ground when working around electronics, technology, and other machinery.
  • Traction: Oil- and slip-resistant, non-marking, siped, rubber outsoles for improved traction that meet or exceed ASTM F1677-96 and F2913 SATRA standards.
  • Support & Comfort: Features KEEN.ReGEN technology.
  • a lightweight, compression-resisting midsole providing 50% more energy return than standard EVA foam making safety footwear more comfortable. Includes removable PU insole.
  • Additional Features: Breathable mesh upper keeps your feet cool in warmer temperatures and non-mutilating upper reduces the change of marking or scratching surfaces when working around sensitive or expensive parts.
Check Stock