Reviews Erw Carbon Steel Pipe

Carbon Fiber Exhaust Tip 3 Inch Inlet 4 Inch Outlet Burnt Blue 3 Inch Exhaust Tips Muffler Tip

  • 【Purchase Guide】 Remove the exhaust tip from the original car and make sure the outer diameter of the exhaust pipe is 3 inch(77mm)..
  • 【Universal fitment】The muffler exhaust end tip fits for most vehicles with a pipe diameter of 3.0 inch..
  • 【High quality steel】 The 3 inch exhaust tip is designed with durable SUS304 stainless steel . Protect your original pipe from sun and rain. Avoid rusting and deformation..
  • 【3K Carbon Fiber】 The shell of the 3 inlet carbon fiber exhaust tip is made with carbon fiber material, smooth and shiny, and resistant to high temperatures.Also can decorate the car, increase the beauty of the car, enhance the driving experience..
  • 【Easy installation】 No welding and drilling required. just put the carbon fiber tail pipe on the car exhaust pipe and tighten the fixing device..
Check Stock

Drill America DWTPT1/4-1-1/4SET 6 Piece NPT Pipe Tap Set in Wooden Case (1/4\

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous..
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap..
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer..
  • 6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes /4.
Check Stock

Carbon Fiber Exhaust Tip 3 Inlet 4 Outlet Red Exhaust Tip 3 inch Car Tailpipe Muffler Tip for 3in Exhaust Pipe

  • 【Universal fitment】The muffler exhaust end tip fits for most vehicles with a pipe diameter of 3 inch.
  • 【High quality steel】 The 3 inch exhaust tip is designed with durable SUS304 stainless steel . Protect your original pipe from sun and rain. Avoid....
  • 【3K Carbon Fiber】 The shell of the 3 inlet carbon fiber exhaust tip is made with carbon fiber material, smooth and shiny, and resistant to high....
  • 【Easy installation】 No welding and drilling required. just put the carbon fiber tail pipe on the car exhaust pipe and tighten the fixing device..
  • 【Warranty】 Tempsnow provide 30-Days warranty. If you have any problems with it or questions, please contact us and we will respond in time. We're....
Check Stock

Okaiti Portable Mini Washing Machine Single Tub Washer And Dryer For Small Clothes New

  • Washing Machine Water Valve for AP6284346, PS12348013, ERW11096267.
  • Brand new Washing Machine Water Valve for AP6284346, PS12348013, ERW11096267..
  • Replaces part numbers:AP6284346,PS12348013, W11096267, W10599423,.
  • Fits Models:W10758828, W10839828, W11165546, W11165546VP..
Check Stock

uxcell Spiral Point Plug Threading Tap M8 x 1.25 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End

  • Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44.
  • the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads..
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped..
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications..
  • Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
Check Stock

Drill America - POUCSNPT5 5 Piece NPT Pipe Tap Set (1/8\

  • Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts.
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
  • NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case.
Check Stock

Drill America - POU3/8NPTW/DRILL 3/8\ Carbon Steel NPT Pipe Tap and 37/64\ High Speed Steel Drill Bit Set, POU Series

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or Jam pipe threads.
  • Black oxide drill bit is ideal for production, maintenance or portable drilling jobs.
  • 3/8" carbon steel NPT tap and 37/64" HSS drill bit with 1/2" Shank.
  • Set contains matching NPT pipe tap and high speed steel drill bit.
Check Stock

Omninmo NPT Pipe Tap Set Thread Forming Taps High Speed Steel Drill Bits Thread Tap Attack Pipe Plate Hand Tapping for Cleaning or Re-thread Damaged or Jam Pipe Threads Size G3/4 55 Degrees

  • High Strength Material: Omninmo pipe tap set is different from the traditional carbon steel material. Our pipe taps is made of composite steel material, which is more durable and Higher hardness..
  • Professional Cutting Tools: Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
  • Convenient and Durable: Uncoated tools feature just the base substrate without any additional treatment or coatings,Carbon steel pipe taps are designed to clean or rethread to damage or block pipe threads,cuts internal threads in pipes..
  • Universal size: Nominal size of the tap is that of the pipe fitting being tapped. Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). The size is 3/4.Omninmo NPT Thread Forming Taps is ideal for pipe fittings..
  • Product Guarantee: If you have any questions, Please contact us in time, We will reply to you immediately to solve your problem..
Check Stock

Zurn GT2700-10-2NH - Steel Grease Trap, 10 GPM 2\ with Flow Control

  • ...e interceptor, whose flow rate is about 35 GPM (132.49 LPM). The interior space is divided into three different filter areas. The solid waste and grease will be stopped by the filter baffle firstly, and then the oil and filtered water will be discharged from the outlet valve and drainage outlet successively..
  • Coated Carbon Steel: Our 70 LB commercial grease trap is made of heavy-duty carbon steel, around 0.07 in (1.8 mm) in thickness, featuring durability and sturdiness. There is a rust & corrosion-proof coating on its exterior surface, which is easy to clean and hard to deform..
  • Reliable Sealing Effect: As a piece of rugged equipment for collecting and filtering the waste in the kitchen, this commercial grease interceptor spotlights the excellent sealing effect. The lid can be tightly fixed with a screw. The cushion layer is equipped for increasing friction and enhancing airtightness. Besides, a sealing ring and PTFE tape are also included in the package..
  • Ease Of Connecting：You can connect our commercial grease trap to your kitchen sink conveniently. Just link the grease inlet pipe to the higher inlet hole and the water outlet pipe to the lower outlet hole, then it will work properly. A piece of connecting pipe is provided, with which you can place ....
Check Stock

PVC Pipe Cutter Exhaust Pipe Cutter Tailpipe Cutter, Universal Chain Pipe Cutter Exhaust Pipe Cut Off Tool Copper Pipe Cutter Carbon Steel Cutting Pliers w/Non-Slip Handle

  • ... the pipe, hand rotate chain around pipe until pipe is cut. Tips: Lubricating the exhaust cutter cutting wheels before use will give a more smooth cutting operation and extends the life of the item.
  • 【Wide Application】The maximum cutting size is 0.09inches(2.5mm). This Pipe Cutter is suitable for cutting most low-carbon steel pipes, copper pipes and plastic (PVC, CPVC, PP, PEX, PE, rubber) pipes.
  • 【Comfortable Grip】14.5 inch (37cm) exhaust pipe cutting tool has rubberized handles.
  • Cushioned for comfort and non-slip security.
  • 【Withsatnd the Test of Time】This quality metal pipe cutter's cutting wheels were made of high quality 45# carbon steel, which won’t easily get dull. The head of the exhaust cutting tool won’t bend from during rotation. Sharp, Durable and Long life service time.
Check Stock

Scotte Stainless Steel Reamer Tool 6 Blade Tobacco Pipe Carbon Scraper

  • Tobacco pipe reamer tool,carbon dioxide cleaner/carbon scraper.
  • Adopt import high quality stainless steel, very upscale atmosphere, show aristocratic temperament.
  • Bit pass needle design, can clean pipe, can change part of flue, very practical.
  • Can be fine-tuned to control the thickness of retained carbon pie.
  • Thicken design, material, strong and durable, beautiful and generous, ideal choice.
Check Stock

KUNTEC Tailpipe Cutter 3/4-Inch to 3-Inch Exhaust Pipe Cutter Tool with 15 Blades

  • This tailpipe cutter is designed for both on and off the car cutting of tailpipes and exhaust pipes with diameters of 3/4 to 3 inches (19-76mm).
  • The Exhaust pipe cutter features 15 blades, there is a cutting wheel on each roller for smooth tracking, only 1/4 inch rotation could finish the cutting.
  • Exhaust pipe cutter is made of high quality carbon steel, strong, sturdy, not easy to damage and extremely durable.
  • The rubber handle is good thickness and non-slip, easy to operate.
  • Cuts pipe up to 3mm thick. It is suitable for On- and Off-Vehicle Use, apply for cutting most types of pipework, such as copper pipes, aluminium pipes, carbon steel pipes etc.
Check Stock

KUNTEC Exhaust and Tailpipe Cutter for Cut Pipes 3/4-Inch to 3-Inch in Diameter

  • This tailpipe cutter is designed for both on and off the car cutting of tailpipes and exhaust pipes with diameters of 3/4 to 3 inches (19-76mm).
  • The Exhaust pipe cutter features 15 blades, there is a cutting wheel on each roller for smooth tracking, only 1/4 inch rotation could finish the cutting.
  • Chain pipe cutter is made of high quality carbon steel, strong, sturdy, not easy to damage and extremely durable.
  • The rubber handle is good thickness and non-slip, easy to operate.
  • Cuts pipe up to 3mm thick. It is suitable for On- and Off-Vehicle Use, apply for cutting most types of pipework, such as copper pipes, aluminium pipes, carbon steel pipes etc.
Check Stock