Reviews Erw 304 Pipe

JY Performance 5PCS 2.5 T304 Stainless Steel Custom Exhaust Pipe Kit Tubing Mandrel Bend Pipe Straight & U-Bend Universal

  • This Universal T304 Stainless Steel Custom Exhaust Kit Made of High Quality T304 Stainless Steel with Computerized Mandrel-Bends for Strength and....
  • 2 X 15'' Straight Pipes, 1 X 180° Pipe, 1 X 90° Pipe, 1 X 45° Pipe..
  • Each 2.5" Smooth Mandrel Bent Tube Is Expanded On One End To Allow Easy Slip-fit Installation..
  • WE ARE DIRECT MANUFACTURER, SO WE GOT THE LOWEST PRICE AND BEST QUALITY..
  • Best Value T304 Stainless Steel Exhaust Pipe Kit..
Check Stock

HNHYNSY 1/8\ 1/4\ 3/8\ 1/2\ Female x Male Thread 90 Deg Brass Elbow Pipe Fitting Connector Coupler for Water Fuel Copper (Thread Specification : 1\)

  • Generally speaking, the raw material stainless steel is generally non-magnetic. However, due to a series of processes such as processing, smelting, and heat treatment, a small amount of martensite or ferrite structure will appear in austenitic 304 stainless steel. Therefore, 304 stainless steel will have weak magnetic properties..
  • This product is made of 304 stainless steel, which is hard and not afraid of high temperature and low temperature, which effectively prevents the phenomenon of pipe joints from cracking..
  • Built-in screw cap reinforcement to make the connection between the water pipe and the elbow more stable and not easy to break.
  • The inner wall of the water pipe is smooth, and the sealing is strong, which strengthens the stability of drainage and exhaust, and the resistance is reduced, the faster the conveying.
  • Suitable for water pipe transfer, natural gas gas transfer, sewage treatment water pipe transfer.
Check Stock

W11043011 Refrigerator LED Light Original Equipment Manufacturer (OEM), Part Module for Whirlpool Whirlpool Kenmore Maytag Fridge W10866538 AP6047972, PS12070396

  • PART NUMBER W11043011:Replaces Following Part Numbers.
  • W10866538 ,W11043011, AP6047972, W10866538, PS12070396.
  • This part works with the following brands: W-hirlpool, K-enmore, M-aytag,A-mana,I-kea.
  • This part is compatible with models including.
  • MFI2570FEB01,AFI2539ERB02,AFI2539ERM03,AFI2539ERW02,WRX735SDHZ01,WRF555SDHB00,WRF555SDHV02,WRX735SDHV00,WRF555SDHV01,WRF555SDHW00,WRX735SDHZ00,WRX735SDBM04,WRX735SDHW00,MFI2570FEZ06,WRX735SDBE02,MFI2570FEZ05,MFI2570FEZ04,MFI2570FEZ03,WRX735SDBH02,IX7DDEXGZ002,MFI2570FEW01,IX7DDEXGZ001,WRF555SDFZ03,WRF555SDFZ04,WRF555SDFZ07,WRX735SDHB00,WRF555SDFZ08,WRF555SDFZ05 WRF555SDFZ03, WRF555SDFZ04, WRF555SDFZ05, WRF555SDFZ07, WRF555SDFZ08, WRX735SDHV00, etc..
  • Fits the following models (not all applicable models may be listed): A-mana AFI2539ERB02 /AFI2539ERM03/AFI2539ERW02 R-efrigerator I-kea IX7DDEXGZ001 R-efrigerator Maytag MFI2570FEB01 /MFI2570FEW01 /MFI2570FEZ03/MFI2570FEZ04 / MFI2570FEZ05 / MFI2570FEZ06 etc..
  • This LED light (part number W11043011) is for refrigerators Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part【LED PCB ONLY! Does not include the plastic housing for the LED board. You must snap the new board into your existing plastic hous....
Check Stock

Bessey VAC-6 Angle Plates (6-Pack)

  • 【SIZE】- Fit Pipe Diameter: 14mm/ 0.55".
  • 【MATERIAL】- Made of 304 high-grade stainless steel. After punching, bending, and integral molding, the structure increases the rib structure to improve the strength of the pipe clamp. Fastened and durable.
  • 【APPLICATION】- Widely used in plumbing, petrochemical, power supply, and other pipeline laying, fixing all kinds of pipelines on wood, masonry, or similar surfaces.
  • 【USAGE】- Choose the corresponding inner height of the pipe clamp according to the OD of the pipe, determine the hole according to the hole dia and position of the pipe clamp, and lock the fastening screw. A layer of soft gasket can be placed on the inner side of the pipe clamp and the pipe fittings, the effect will be better.
  • 【PACKAGE CONTENT】- 20Pcs × Rigid Pipe Straps.
  • Note: Mounting screws are not included here.
Check Stock

AMZCNC Compact Bender Kit with Reverse Bending Attachment for 1/4 - 7/8 Tube and Pipe Bending Premium Ratcheting Tube Bender

  • 【High quality material】: The main body of the tube bender of The copper tube bending tool kit is made of stainless steel, which is pressure....
  • 【Wide range of application】: This pipe bender tool kit is suitable for pipe benders of 1/4"-7/8", applicable pipe materials: copper pipe, aluminum....
  • 【Easy to install】: The pipe bender is easy to install, easy to assemble and operate, and easy to get started. Support pipe diameter: 1/4.
  • 【Ergonomic design】: CT-999 pipe bender conforms to ergonomic design. The kit is made of 304 stainless steel, steel fiber, iron and other....
  • 【Complete accessories】: The pipe bender kit has a variety of tools to meet different needs. The kit includes 1 x Bender, 7 x Fiber Wheel, 1 x Pipe....
Check Stock

Champion Cutting Tool Corp Circular Saw Blade 8\

  • New & innovative, RZR Cermet tipped circular saw blades cut faster and 2X longer than standard carbide tipped blades. Cermet = a ceramic and metal compound that resists heat and friction.
  • Feature 2X more teeth than standard cutting blades to cut through tough 304 stainless steel.
  • Feature 2x more teeth than standard cutting blades to cut through tough 304 stainless steel.
  • Special 2-step saw body design and unique laser slits reduce vibration, noise and increase stability. Ideal for cutting stainless steel plate, angle iron, pipe, all thread/rebar and more..
  • Max thickness of cut= 1/8".Please note that when cutting pipe or tubing, "max thickness of cut" refers to wall thickness, not overall diam..
Check Stock

PATIKIL Thermowell Pipe Immersion Well 1/4 ID 9/32 OD 20 Stainless Steel 304 for Weldless Thermowell Brewing Thermometer 2pcs

  • Thermowell pipe is mainly used for sensor protection pipe. Temperature sensors are placed in thermowell pipes, which can be used to measure temperatures, such as water tank temperature measurement and temperature measurement during the brewing.
  • Thermowell pipe, is in size of : 6mm/0.24-inch inner dia, 7mm/0.28-inch outer dia, 500mm/20-inch length.
  • 304 stainless steel material, sturdy and durable, not easy to rust.
  • Easy to use, easy to install and operate.
  • Steps of installation: 1. Choose the right size thermowell pipe.
  • 2. Remove the thermowell pipe to be replaced.
  • Please pay attention to choose the appropriate size of thermowell pipe, especially the diameter and length of the thermowell pipe.
Check Stock

Dernord 2 Inch (OD64) Tri-clamp Ripple Heating Element Electric Water Heater 5500W 240V

  • Stainless Steel Tri-clover Clamp 2 Inch (OD64), fit 2″(51mm) pipe if that pipe has a 2″ flange for triclamp.
  • With SUS304 Materials Cap,easy to Install and fits Standard 2″ tri-clover coupler of American.
  • Nylon Cable Gland Joint Adjustable Locknut for PG21 Wire OD 12.5mm to 18mm.
  • SUS304 Tri-clamp Ripple Foldback heating element provides 5500w 240v of power.
  • Resists dry firing, lime deposits, and sand that would burn out ordinary elements.
Check Stock

Rodeel 24 PCS Fishing Leaders Wire with 49 Strands Tooth Proof Stainless Steel with swivels

  • Package Content:24pcs fishing wire leaders rigs.
  • Length: 25cm/0.82inch,Line Diameter: 1mm/0.04inch,Steel wire Pulling Force:40KG/88.18LB.
  • Material:High-strength stainless steel wire +hot air pipe.
  • Design - 8-ring interface ring solves the winding problem, and use hot air pipe to wrap the snap and swivel, remain stable underwater, fish loading rate is higher.
  • Lamination fishing line- 304 stainless steel 49 stranded wire，very soft and strong. The 49 strand design makes it very durable, and the 304 lamination stainless steel wire used will not rust..
Check Stock

DNYSYSJ Kitchen Commercial Sink with 2 Bowls,2 Compartment Utility Sink with 2 Drainer & 2 Shelves,304 Stainless Steel Freestanding Kitchen Sink

  • 【Main Parameters】Color: silver,Material: 304# stainless steel Surface treatment: wire drawing technology,Number of bowls: 2 Bowl shape: rectangular,Maximum load: 150kg,Bowl size: 33x33x20cm,Platform size: 35x45cm,Overall size: 120x85x45cm Inlet pipe: 80cm (31.5in),Packing size: 125*50*35cm,Weight: 17kg.
  • 【Premium Quality】Our double utility sink is made of sturdy 304 stainless steel, super easy to clean and keep hygienic, with a polished surface, with better anti-corrosion effect and long-lasting effect, and it will definitely look shiny like a kitchen! The spacious drainer provides you with enough space to dry everything from cutlery, plates to pots and pans..
  • 【Easy to Use and Clean】It adopts streamlined rounded corners and edge design, no dead corners, convenient for daily washing, double bowls can be placed independently and easy to clean. Can be cleaned with neutral soap to ensure anti-rust gloss life.
  • 【Double Shelves Design】Double shelves can store cleaning equipment and accessories, two stainless steel drainage devices with two detachable filters can prevent food and debris from clogging the drainage pipe, and the reinforced table can be used for cutting pork chops and steaks, etc., gooseneck 360 degree rotation Faucet, can prod....
Check Stock

6 Pack 3/4 inch Adjustable Pipe Bracket Clamp, Stainless Steel Wall Ceiling Mount Pipe Support Pipe Hanger Clamp, Split Ring Hanger ID 15mm-19mm

  • 15-19mm Pipe Strap Clamp: The Pipe Clamp fits for 1/2 inch/15mm to 3/4 inch/19mm diameter pipe, the nut is M8..
  • Stainless Steel Pole Clamp: The split ring hanger is made of 304 stainless steel, it durable and offers rust protection..
  • Package included: 6 pack Pipe Bracket Clamp. Length: 2.2 inch/55mm, width: 1.1/ 28mm..
  • Easy to Use: Easy to install, pipe bracket clamp can be installed on the wall or ceiling..
  • Applications: These adjustable pipe support bracket clamp are suitable for both industrial and home applications..
Check Stock

EVIL ENERGY 2.75 ID to 3 OD Exhaust Pipe Reducer Adapter 304 Stainless Steel Universal

  • Size: Small Diameter: 2.75" (2 3/4inch) ID/69.85mm (Fits over 2.75" OD Pipe). Large Diameter: 3" OD/76.20mm (Fits inside 3" ID Component). Length may....
  • Fitment: Universal fit for all exhaust / turbo / intercooler / intake piping connection. Welding is recommended..
  • Category: Pipe to Component (Use when your pipe is smaller than your component).
  • Material: 304 stainless steel. Package: 1PC 2.75 inch ID to 3 inch OD exhaust reducer..
  • EVIL ENERGY provides 3-month warranty for this exhaust pipe adapter reducer. Professional installation is highly recommended. Any problem you have,....
Check Stock

MroMax 20Pcs Rigid Pipe Strap 0.55\ Tension Tube Clip Clamp 6.8 Grade 304 Stainless Steel Rigid Pipe Straps with 2 Holes Tube U Bracket Clamp Hanger 14mm Pipe Clamp Silver Tone

  • [Clamp Size] Wall pipe support fit for 0.59-0.75"(15-19mm) pipe OD, thickness: 0.047”/1.2mm, width: 0.098”/ 2.5mm, bracket length: 50mm, screw length: 50mm, installation length can be adjustable as per your need..
  • [Protect Your Pipe] Split ring pipe hanger with silicone Cushion, you don't have to worry about scratches caused by friction between clamp and pipe when you use it, and will pipe fixing more strong..
  • [High Quality Material] Pipe support bracket made of full 304 stainless steel, high temperature resistance and rust resistance,durable, and can be used in high temperature or humid environment..
  • [Wide Applications] Pipe Bracket Clamp is mainly used for pipe support, pipe fixing, pole support, sinking office chair fix, and can be installed on the wall or ceiling..
  • [Various Sizes] Mount Pipe Supports have various sizes for your choise. in order to avoid the hassle of returning goods, please browse the products before purchasing..
Check Stock