West System 105B Epoxy Resin (126.6 fl oz) Bundle with 206B Slow Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)
- ...stem 105B Epoxy Resin (126.6 fl oz), 206B Slow Epoxy Hardener (27.5 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
- WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
- NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
- FIVE-PART RESIN TO ONE-PART HARDENER RATIO: When combined with 105 Resin in a five-part epoxy resin to one-part hardener ratio, this cured resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and barrier coating properties. The West System 206 Slow Hardener is not intended for clear coating.
- GENERAL COATING AND BONDING APPLICATIONS: The 105/206 Epoxy Mixture is used for general coatin....
Check Stock
Fasco Epoxies 110 Epoxy Glue Pint Kit (Wood, Aluminum, Fiberglass)
- Adhesion - Unusually high adhesion to concrete, stone, wood, metal, glass, ceramic, rubber and a wide variety of plastic materials..
- Cohesion - When the resin is properly cured, the cohesion strength within the bond line is so strong and the adhesion of the epoxy to the materials so great that stress failure will often occur in one of the materials being bonded rather than in the epoxy..
- Shrinkage - Epoxy Glue cures with only a small shrinkage compared to other adhesives. As a consequence, less strain occurs at the bond line and it is stronger. Shrinkage is held to a fraction of 1%. . Stability - Epoxy glue maintains its dimensions and shape under prolonged stress. The stability combined with outstanding tensile, shear and impact strength makes epoxy glue unique among adhesives..
- Resistance - Unlike most adhesive materials, epoxy glue is highly resistant to moisture. Its resistance to solvents is outstanding..
- Insulation - Epoxy glue is an excellent insulator to both heat and electric current..
Check Stock
DRICORE PRO Concrete Repair Adhesive Epoxy | High Power Low Flexibility Adhesive to Fix Cement Pits, Holes, and Cracks with Injection, Carbon Fiber, Fiberglass, Reinforced Polymers & More
- NEW, EASY, SAFE: DRICORE PRO Adhesive Epoxy uses an advanced, self-mixing formula that combines two different components to create the perfect, high-strength liquid epoxy adhesive that is designed to be used with DRICORE Carbon Fiber Reinforcement or similar products.
- MADE FOR THE TASK: DRICORE PRO Adhesive Epoxy is high strength and water resistant after curing, making it versatile enough to use at home or on the job. Strong enough to use as an industrial strength epoxy, our repair epoxy is great for contractors and experienced DIY repairmen doing home projects, basement, and garage renovations.
- COST EFFECTIVE, SIMPLE TO USE: Combine our epoxy with carbon fiber reinforcement for a cheap but effective way to fix your clients’ apartment, condo, or house. Save both time and money by using our specially engineered Adhesive Epoxy for your next project or concrete service job. Perfect for any size of workplace or household!.
- MULTI-PURPOSE: DRICORE PRO Concrete Repair Adhesive Epoxy is made to: repair concrete that is cracked, broken or split, attach carbon fiber or fiberglass, anchor bolts, threaded rods, strengthen rebar, railing, dowels and more.
- BUY WITH CONFIDENCE: We pride ourselves on customer satisfaction and want you to feel secure in your purchase.....
Check StockBrampton Technology, LTD. Epoxy PRO-FIX 5&10 Rapid Cure - Golf Club Repair.85 Ounces
- RAPID CURING EPOXY: Bonds all shaft types including graphite and titanium. Ready for play in 10-20 minutes with 2-3 minutes of work time. Gets golfers back on the course and out of the repair shop as fast as possible without compromising strength of bond..
- EASY DISPENSE DOUBLE BARREL CARTRIDGE with .85oz: Mix ratio 1:1 by volume. No tools needed..
- AEROSPACE GRADE BONDING STRENGTH: Tensile bonding strength rated at 5,100 PSI. Tough enough for 120+ mph golf swings..
- INSTALLS CLUB HEADS TO GOLF SHAFTS: Use PRO-FIX Epoxy to install new club heads or re-shaft your golf clubs. Follow the easy 8-step instruction process..
- PRO-FIX EPOXY WORKS WITH ALL SHAFT AND CLUB HEAD MATERIALS: Many epoxy types won’t work properly with graphite or titanium..
Check Stock
Ding All Super Stand Up Paddle Board (SUP) Epoxy Repair Kit with a Superior, Eco-Friendly and Non Yellowing Formula for Small to Medium Ding Repairs
- ...afts. This epoxy resin is easy to use. It is mixed in a ratio of 2 parts resin and 1-part hardener.
- POPULAR CHOICE FOR PADDLEBOARD REPAIR: Ding All Paddleboard Epoxy Kit is a popular choice for ding repairs on both Polyester and Epoxy SUPs because of its exceptionally high strength, low odor while curing and a working time of around 30 minutes.
- CURING TIME: The epoxy resin has a 30 - minute working time and 6 to 8 hours full cure figured at 77 F. The curing speed may change based on colder or warmer temperatures. It is eco-friendly and UV Stable to help prevent yellowing.
- ALL INCLUSIVE KIT: This MADE IN USA kit comes with 2oz. Epoxy Resin & 1oz. Epoxy Hardener (3oz. total), Fiberglass Cloth,2 Sanding Pads (2 grade), cup & Mixing Sticks,2 cover sheets, Q-Cell Filler, bonus Sun Cure Epoxy Mini and Easy Instructions.
- BONUS SUN CURE RESIN: If smaller dings are being fixed, the kit comes complete with our world-famous Sun Cure Epoxy Fiberfill resin. Packed with fiberglass strands for strength, Sun Cure will get the job done in minutes after Sun/UV exposure.
Check Stock
CLZYLRS Resin Tape for Epoxy Resin Molding Thermal Adhesive Tape -Silicone Adhesive Tape - Craft Tape for Making River Tables Hollow Frame Bezels Epoxy Resin Craft Pendant (2 inch Wide 216 Ft Long)
- ...sins.This high-temperature tape is ideal for casting on epoxy and sealant resins and can be used to create amazing projects.Our epoxy tapes do not curl or melt like other tapes and are perfect for you.Oxidation and High Temperature Resistance Easy Peeling..
- ✔【Chemical & UV Rrsistant】This epoxy tape retains its strength under chemicals, high temperatures and bright light, making it ideal for the manufacture and use of specialized Marine grade epoxy resins.High heat resistant tape provides excellent strength and low shrinkage during curing, as well as toughness and resistance to chemical and environmental damage..
- ✔【Widely Used】:Our epoxy tape can be used as powder coating tape and light joint tape, silicone splicing tape，Resin Tape for Epoxy is very suitable for DIY epoxy craft,especially suitable for making river tables hollow frame bezels epoxy resin craft pendant，metal frame DIY pendants, epoxy pendants, earrings or bracelets and open bezels..
- ✔【Apply to】This epoxy adhesive tape is suitable for creating Valentine's Day gifts, parents, friends birthday gifts.Work on your dream project, add some fun to your life, and make something different...
Check Stock
West System 105A Epoxy Resin (32 fl oz) Bundle with 205A Fast Epoxy Hardener (7 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)
- ...est System 105A Epoxy Resin (32 fl oz), 205A Fast Epoxy Hardener (7 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
- WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
- NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
- PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
Check Stock
West System 105B Epoxy Resin (126.6 fl oz) Bundle with 205B Fast Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)
- ...stem 105B Epoxy Resin (126.6 fl oz), 205B Fast Epoxy Hardener (27.5 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
- WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
- NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
- PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
Check StockLoctite Epoxy Metal/Concrete, 0.85 fl oz, 1, Syringe
- For Concrete and Metal Projects: Permanent, high-strength bond works great on railings, awnings, posts, brick, concrete and cinderblock without conducting electricity.
- Fast and Professional: High-strength epoxy sets in just 5 to 12 minutes to a metallic grey finish to blend with metal and concrete.
- Two-Part Adhesive: Convenient double syringe applicator dispenses equal parts epoxy resin and hardener for a tough, rigid, high-strength bond.
- Resilient: Does not shrink and is resistant to humidity and water, most common solvents, and has high impact resistance and can be sanded, drilled, and painted.
- Multi-Purpose: Versatile epoxy can be used as an adhesive for a wide range of materials like tile, wood, metal, ceramic, and glass or as a filler for gap filling, surface repairs and laminating.
Check StockBrampton Epoxy PRO-FIX 5&15 Quick Cure - Golf Club Repair 8 Ounces
- QUICK CURING EPOXY: Bonds all substrates including steel, graphite and titanium. Ready for play in 20-30 minutes with 5-8 minutes of work time..
- EASY SQUEEZE BOTTLES INCLUDED with 4oz and 8oz Kits / EASY DISPENSE DOUBLE BARREL CARTRIDGE with .85oz: Mix ratio 1:1 by volume. No tools needed..
- AEROSPACE GRADE BONDING STRENGTH: Tensile bonding strength rated at 5,400 PSI: Tough enough for 120+ mph golf swings..
- INSTALLS CLUB HEADS TO GOLF SHAFTS: Use PRO-FIX Epoxy to install new club heads or re-shaft your golf clubs. Follow the easy 8-step instruction....
- PRO-FIX EPOXY WORKS WITH ALL SHAFT AND CLUB HEAD MATERIALS: Many epoxy types won’t work properly with graphite or titanium. Formulated to easily....
Check StockMAZEL Durable Rubber Grip Vise Clamp for Golf Club Repair Regripping Shaft
- QUICK CURING EPOXY: Bonds all substrates including steel, graphite and titanium. Ready for play in 20-30 minutes with 5-8 minutes of work time..
- EASY SQUEEZE BOTTLES INCLUDED with 4oz and 8oz Kits / EASY DISPENSE DOUBLE BARREL CARTRIDGE with .85oz: Mix ratio 1:1 by volume. No tools needed..
- AEROSPACE GRADE BONDING STRENGTH: Tensile bonding strength rated at 5,400 PSI: Tough enough for 120+ mph golf swings..
- INSTALLS CLUB HEADS TO GOLF SHAFTS: Use PRO-FIX Epoxy to install new club heads or re-shaft your golf clubs. Follow the easy 8-step instruction process..
- PRO-FIX EPOXY WORKS WITH ALL SHAFT AND CLUB HEAD MATERIALS: Many epoxy types won’t work properly with graphite or titanium. Formulated to easily remove heads without damaging a graphite shaft..
Check Stock
J-B Weld 8265S Original Steel Reinforced Epoxy Twin Pack - 2 oz (Pack of 2)
- SLOW-CURE FOR COMPLICATED JOBS: A long curing time makes this adhesive perfect for difficult tasks that may require adjustments.
- effectively reposition pieces for up to 80 minutes.
- FIX OFFICE FURNITURE: Such as broken handles and splintered wood.
- also use on garden statues, figurines and the like indoors or out..
- REPAIR TOYS: Repair, don’t throw out small delicate plastic glass or ceramic item, repair toys, use as golf epoxy and more.
- PROFESSIONAL GRADE STRENGTH: Extra-strong, waterproof adhesive.
- MULTI-USE APPLICATION: Indoor or outdoor epoxy glue for metal, wood, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber and most plastics (except polyethylene, polypropylene, and PTFE).
- STRONG AND DURABLE: Provides a strong bond that sets clear.
- can be sanded and painted after bonding or repair.
- water, oil, chemical and impact resistant.
- high temperature resistance (-30 to 65 degree Celsius).
- WITHSTANDS ROUGH HANDLING: Two-part epoxy glue instant mix.
- for best results apply epoxy adhesive to clean and slightly rough surfaces.
Check StockBrampton Epoxy PRO-FIX 20/20 Long Cure - Golf Club Repair (8 Ounce)
- SUPERIOR BOND STRENGTH: Developed with impact resistance and durability as its major components. Bonds to all shaft types including graphite, steel and titanium. 20-hour cure ensures a tough bond with 20-30 minutes of work time..
- EASY SQUEEZE BOTTLES INCLUDED with 4oz and 8oz Kits / EASY DISPENSE DOUBLE BARREL CARTRIDGE with .85oz: Mix ratio 1:1 by volume. No tools needed..
- AEROSPACE GRADE BONDING STRENGTH: Tensile bonding strength rated at 5,800 PSI. Tough enough for 120+ mph golf swings..
- INSTALLS CLUB HEADS TO GOLF SHAFTS: Use PRO-FIX Epoxy to install new club heads or re-shaft your golf clubs. Follow the easy 8-step instruction process..
- PRO-FIX EPOXY WORKS WITH ALL SHAFT AND CLUB HEAD MATERIALS: Many epoxy types won’t work properly with graphite or titanium. Formulated to easily remove heads without damaging a graphite shaft..
Check Stock
