Reviews Epdm Waterproof Membrane

1 Pail, 4 Gallon Each of Roofing Latex Bonding Glue Adhesive. 100% Full Refund Guarantee Available

  • 1 - 4 gallon pail of ROOFING latex Bonding Adhesive, covers 350 sq. ft. Trowel application is the recommended application as per the instructions as a ONE surface WET LAMINATE. However, if you wish to use a paint roller, we recommend using a 9" fine nap paint approved roller. If you use the roller, and not a trowel, you need to put the adhesive on BOTH surfaces and let TACK dry for 5 minutes or so, like a 2 sided solvent contact adhesive, depending on weather and heat conditions..
  • Used to adhere construction roofing membrane to surface, Not recommended to be used in temperatures lower than 50*. Temperature needs to be above 50* for 24 hours for full cure..
  • Latex NON HAZ MAT Bonding Adhesive. Top Quality. 100% FULL REFUND GUARANTEE.
  • Bond EPDM, TPO, and PVC Roofing to Wood, OSB, Plywood, Metal and BUR Roofing.
  • Use as a SINGLE surface wet laminate adhesive to bond your roofing membrane to the substrate. This is a BONDING Adhesive to adhere or bond the EPDM or TPO to a substrate of wood, plywood, OSB or metal. This is NOT a seaming product that will seam EPDM to EPDM or TPO to TPO, you must use a SEAMING product like black seaming adhesive or vulcanizing seaming tape which we have available for that type of application..
Check Stock

Superior RV Liquid Rubber Roof Coating 1 Gallon

  • Superior RV is a one part coating, based on new styrenic, thermoplastic, block copolymer technology.The product requires no catalyst or tape, and provides permanent, waterproof RV roof restoration Outstanding adhesion to TPO, EPDM. fiberglass, plywood, vinyl and aluminum.
  • Surface Preparation: Do NOT use RV rubber roof cleaners as many of these contain protectants that prevent adhesion of coatings. Surface MUST be properly cleaned. Remove all loose coatings and caulking that is peeling. Using warm water and Tide laundry detergent. Scrub or pressure wash, flush with clean water and allow to dry thoroughly. Do not use dish detergent. All dirt, oily residues, wax and surface treatment products, such as rubber conditioners, must be removed prior to coating..
  • ** Precautions: Do not apply this coating directly to Alpha Brand EPDM roof membranes or to pre-existing coatings without applying Superior Flexible Epoxy Primer first. DO NOT USE THIS PRODUCT ON SUPERFLEX TPO MADE BY ALPHA SYSTEMS OR DiFLEX II MEMBRANE MADE BY DICOR. THEY ARE IDENTIFIED BY A TEXTURED, ORANGE-PEEL SURFACE.
Check Stock

Liquid Rubber NeoPond Waterproof Pond Sealant - Fish and Plant Safe Waterproofing Membrane Sealer for Ponds and Water Features Black 1 Gallon

  • LEAKY POND OR WATER FEATURE - Ponds will eventually spring a leak. Whether it’s Concrete, EPDM or Wood Liquid Rubber NeoPond Sealant is a liquid....
  • FLEXIBLE HEAVY-DUTY COATING - UV stable and easy application of a waterproofing sealant for a fully submersible water feature or pond, fish and plant....
  • ENVIRONMENTALLY FRIENDLY - Liquid Rubber NeoPond Sealant is water based, containing no Solvents and ultra-low VOC's.
  • EASY TO APPLY - Basically just like painting except you use heavy coats to build up your waterproof membrane.
Check Stock

Superior RV Liquid Rubber Roof Coating 5 Gallon

  • Superior RV is a one part coating, based on new styrenic, thermoplastic, block copolymer technology.The product requires no catalyst or tape, and provides permanent, waterproof RV roof restoration Outstanding adhesion to TPO, EPDM. fiberglass, plywood, vinyl and aluminum.
  • Surface Preparation: Do NOT use RV rubber roof cleaners as many of these contain protectants that prevent adhesion of coatings. Surface MUST be properly cleaned. Remove all loose coatings and caulking that is peeling. Using warm water and Tide laundry detergent. Scrub or pressure wash, flush with clean water and allow to dry thoroughly. Do not use dish detergent. All dirt, oily residues, wax and surface treatment products, such as rubber conditioners, must be removed prior to coating..
  • ** Precautions: Do not apply this coating directly to Alpha Brand EPDM roof membranes or to pre-existing coatings without applying Superior Flexible Epoxy Primer first. DO NOT USE THIS PRODUCT ON SUPERFLEX TPO MADE BY ALPHA SYSTEMS OR DiFLEX II MEMBRANE MADE BY DICOR. THEY ARE IDENTIFIED BY A TEXTURED, ORANGE-PEEL SURFACE.
  • THIS PRODUCT IS NOT A WATER BASED ACRYLIC COATING. Please note a signature is required by FedEx upon delivery..
Check Stock

Superior RV Liquid Rubber Roof Coating 4 Gallon

  • Superior RV is a one part coating, based on new styrenic, thermoplastic, block copolymer technology.The product requires no catalyst or tape, and provides permanent, waterproof RV roof restoration Outstanding adhesion to TPO, EPDM. fiberglass, plywood, vinyl and aluminum.
  • Surface Preparation: Do NOT use RV rubber roof cleaners as many of these contain protectants that prevent adhesion of coatings. Surface MUST be properly cleaned. Remove all loose coatings and caulking that is peeling. Using warm water and Tide laundry detergent. Scrub or pressure wash, flush with clean water and allow to dry thoroughly. Do not use dish detergent. All dirt, oily residues, wax and surface treatment products, such as rubber conditioners, must be removed prior to coating..
  • ** Precautions: Do not apply this coating directly to Alpha Brand EPDM roof membranes or to pre-existing coatings without applying Superior Flexible Epoxy Primer first. DO NOT USE THIS PRODUCT ON SUPERFLEX TPO MADE BY ALPHA SYSTEMS OR DiFLEX II MEMBRANE MADE BY DICOR. THEY ARE IDENTIFIED BY A TEXTURED, ORANGE-PEEL SURFACE.
  • THIS PRODUCT IS NOT A WATER BASED ACRYLIC COATING. Please note a signature is required by FedEx upon delivery..
Check Stock

Dicor 917BA-5 Water-Based EPDM and TPO RV Roof System Bonding Adhesive - 1 Quart

  • USE: Ideal for sealing and bonding parts on RV roofs for easy and simple maintenance.
  • COMPATIBILITY: Made for EPDM and TPO only.
  • Not for use on metal, fiberglass, or membrane-to-membrane applications.
  • COVERAGE: About 160 square feet per gallon.
  • FEATURES: Water-based and environmentally friendly.
Check Stock

Dicor 901BA-1 Water-Based RV Roof System Bonding Adhesive - EPDM and TPO Compatible

  • USE: Ideal for sealing and bonding parts on RV roofs for easy and simple maintenance.Fit Type: Universal Fit.
  • COMPATIBILITY: Made for EPDM and TPO only.
  • Not for use on metal, fiberglass, or membrane-to-membrane applications.
  • COVERAGE: About 160 square feet per gallon.
  • FEATURES: Water-based and environmentally friendly.
Check Stock

L R Liquid Rubber EPDM Rubber and RV Roof Primer - Weatherseal Camper and Trailer Roofing Coating 1 Gallon

  • WHY EPDM PRIMER - EPDM Primer is a rubber polymer water-based roofing primer, designed for adhesion bonding on EPDM surfaces..
  • RV ROOFING MAINTENANCE - Weatherproof RV roofs and other EPDM rubber surfaces by first applying this EPDM Primer before applying the actual waterproof sealant or seam tape.
  • EASY TO APPLY - Apply using a conventional brush or roller equipment.
  • may also be sprayed using a delivery system and nozzles appropriate for this material.
  • APPLICATION - All surfaces should be clean, dry, and free of contaminants that may result in a surface that is uneven or not sound.
  • FOR A BULLETPROOF SYSTEM - Liquid Rubber RV Smart Cleaner before Primer application.
  • EPDM Primer improves adhesion for Seam Tape and other Liquid Rubber RV Roof Coating.
Check Stock

Alpha Systems 8011 Acrylic Water Based Bonding Adhesive - 1 Gallon

  • MEDIUM DRYING TIME — Alpha Systems 8011 Adhesive has a moderate dry time, best suited for applications where you don’t need a rapid solution..
  • FLEXIBLE — Flexibility is important in your adhesive, so that the roof membrane can expand and contract even after it’s attached to the roof..
  • TENACIOUS BOND — Bonding surfaces include EPDM, TPO, PVC, and Hypalon membranes.
  • as well as wood, plywood, fiberboard, polyisocyanurate, gypsum, and concrete decking substrates..
  • SAFE, ZERO ODOR — This very low VOC, odorless adhesive has no special safety requirements for application..
  • DISCLAIMER — Alpha Systems, LLC retains the right to deny liability for any defects or damages to the roof membrane caused by another manufacturer’s products such as sealants, adhesives, tapes, or related products..
Check Stock

Annhua 5Cans Denture Flexible Acrylic,Dental Materials for Dentist Clinic Use

  • MEDIUM DRYING TIME — Alpha Systems 8011 Adhesive has a moderate dry time, best suited for applications where you don’t need a rapid solution..
  • FLEXIBLE — Flexibility is important in your adhesive, so that the roof membrane can expand and contract even after it’s attached to the roof..
  • TENACIOUS BOND — Bonding surfaces include EPDM, TPO, PVC, and Hypalon membranes.
  • as well as wood, plywood, fiberboard, polyisocyanurate, gypsum, and concrete decking substrates..
  • SAFE, ZERO ODOR — This very low VOC, odorless adhesive has no special safety requirements for application..
  • DISCLAIMER — Alpha Systems, LLC retains the right to deny liability for any defects or damages to the roof membrane caused by another manufacturer’s products such as sealants, adhesives, tapes, or related products..
Check Stock

Showers Pass Waterproof Breathable Multisport Unisex Socks - Crosspoint Classic (Black - Large/X-Large)

  • CONSTRUCTION Three layer bonded construction sandwiches a waterproof-breathable membrane (Showers Pass Proprietary Artex Membrane) between a wear resistant knit exterior and a breathable Coolmax lining.
  • WATERPROOF The Artex Membrane is an ultra-thin PTFE Waterproof Breathable Membrane whose molecular structure allows the membrane to stretch while the pores of the membrane do not. This provides a reliable level of waterproof and breathable protection so your feet dont overheat during athletic activities..
  • COMFORTABLE These seamless, waterproof-breathable socks keep your feet dry and comfortable in wet conditions without adding bulk or sacrificing comfort no plastic bag feeling like other waterproof socks.
  • GUARANTEE Our waterproof membrane is seamless and is formed in the shape of 3-D foot not a flat plywood foot shape. This offers a better fit and feel with no seam-like ridge on the socks. After the three layers of the sock are bonded together, each sock is pressure tested to ensure it has no leaks. A wide toe box and padded toe and heel provide excellent cushioning and durability..
Check Stock

Showers Pass Waterproof Crosspoint WP Crew Sock, Chili Red, L/XL.

  • CONSTRUCTION Three layer bonded construction sandwiches a waterproof-breathable membrane (Showers Pass Proprietary Artex Membrane) between a wear resistant knit exterior and a moisture-wicking Coolmax lining.
  • WATERPROOF The Artex Membrane is an ultra-thin PTFE Waterproof Breathable Membrane whose molecular structure allows the membrane to stretch while the pores of the membrane do not. This provides a reliable level of waterproof and breathable protection so your feet don’t overheat during athletic activities..
  • COMFORTABLE These seamless, waterproof-breathable socks keep your feet dry and comfortable in wet conditions without adding bulk or sacrificing comfort – no plastic bag feeling like other waterproof socks.
  • VERSATILE Suitable for cycling, running, hiking, golfing, fishing, kayaking, rafting, snow sports, and other outdoor activities.
  • GUARANTEE Our waterproof membrane is seamless and is formed in the shape of 3-D foot not a flat plywood foot shape. This offers a better fit and feel with no seam-like ridge on the socks. After the three layers of the sock are bonded together, each sock is pressure tested to ensure it has no leaks. A wide toe box and padded toe and heel provide excellent cushioning and durability..
Check Stock

Showers Pass Official National Geographic 100% Waterproof Multisport Unisex Socks - MD/LG

  • CONSTRUCTION Three layer bonded construction sandwiches a waterproof-breathable membrane (Showers Pass Proprietary Artex Membrane) between a wear resistant knit exterior and a breathable Coolmax lining.
  • WATERPROOF The Artex Membrane is an ultra-thin PTFE Waterproof Breathable Membrane whose molecular structure allows the membrane to stretch while the pores of the membrane do not. This provides a reliable level of waterproof and breathable protection so your feet don’t overheat during athletic activities..
  • COMFORTABLE These seamless, waterproof-breathable socks keep your feet dry and comfortable in wet conditions without adding bulk or sacrificing comfort – no plastic bag feeling like other waterproof socks.
  • VERSATILE Suitable for cycling, running, hiking, golfing, fishing, kayaking, rafting, snow sports, and other outdoor activities.
  • GUARANTEE Our waterproof membrane is seamless and is formed in the shape of 3-D foot not a flat plywood foot shape. This offers a better fit and feel with no seam-like ridge on the socks. After the three layers of the sock are bonded together, each sock is pressure tested to ensure it has no leaks. A wide toe box and padded toe and heel provide excellent cushioning and durability..
Check Stock