EOTech Holographic Weapon Sight XPS2-0 Tan
- EOTECH XPS2-0GRN - Holographic Weapon Sight in black with GREEN reticle (68MOA ring & 1 MOA dot).
- Green Reticle - 6x easier to see than red during daytime operation.
- Adjustable Brightness - The XPS2 has 20 brightness settings for use in any lighting scenario.
- Compact Design - Leaves more rail space for rear iron sights or magnifier.
- EOTECH HWS Prestige Warranty - Comes with 10 year limited warranty.
Check StockAde Advanced Optics Ruger 10/22 Red-Dot Sight Mount Fit Vortex Venom Docter Burris Fastfire Optics
- This red dot sight fit ADE model RD3-006, RD3-009, RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium) red dot sights..
- Also fit Doctor, Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech mrds, , Insight red dots..
- This adapter mount is designed to connect red dot optic sights to 10/22..
- Aircraft grade Aluminum in Matte black finish..
- Mounting hardware comes with screws and allen wrench..
Check StockOuterimpact Red Dot Adapter Mount for Sig Sauer P365 …
- Compatible Guns: P365. DOES NOT WORK WITH P365XL.
- Compatible Red Dot Sights (Mounting Screws INCLUDED): Trijicon RMR, Doctor, Insight MRDS, Eotech MRDS, Leupold Delta Point, Leupold Delta Point Pro, Vortex Razor, Vortex Viper, Vortex Venom, Burris Fast Fire 2 & 3, CMORE RTS & STS, Sig Romeo 3, UTG Reflex Micro Dot, Shield RMS (additional screw purchase required), Holosun 407/507c, Kahles Helia, Springfield Hex Dragonfly, Bushnell RXS 100 and 250, Crimson Trace CTS 1275.
- Dimensions: Length: 2.15″ Width: 1.06″ Height: 0.21".
Check StockAde Advanced Optics Optics Delrin Shims 1.0 Degree for Vortex Venom & Viper Burris Fastfire II III,Red dot Sight
- Optic Shim is made to fit between the red dot and the mounting plate. Depending on the handgun, some handguns need THIS 1degree shim to give extra....
- Do not return your "defective" red dot that can't adjust the illuminated dot high enough to zero. This optic shim solves the problem by raising the....
- Fits: Vortex Venom & Viper, Burris Fastfire II, III, Docter Red Dot Sight, Insight, Eotech MRDS, Sightmark minishot, Meopta. All trademarks mentioned....
- Also Fits: Ade Advanced Optics RD3-006, RD3-009, RD3-011, RD3-012, RD3-013, RD3-015. The center two screw holes might be 1 or 2mm off for some red....
- What it does? While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turn(screw maxed-out),....
Check StockGrim Tales 17: Guest From The Future – Find Hidden Objects Mystery Puzzle Game
- EOTECH EXPS2-0GRN – Holographic Weapon Sight in black with GREEN reticle (68MOA ring & 1 MOA dot).
- Green Reticle – 6x easier to see than red during daytime operation.
- Side Button Operation – Compact design and side button operation consumes minimal rail space and is ideal for use with a G33 Magnifier.
- Mount – Quick Detach lever fits 1″ Weaver and MIL-STD 1913 Rails.
- EOTECH HWS Prestige Warranty – Comes with 10 year limited warranty.
Check StockEOTECH EXPS2 Holographic Weapon Sight, Matte Black, Dimensions: 3.8' x 2.9' x 2.2'
- EOTECH EXPS2-0GRN – Holographic Weapon Sight in black with GREEN reticle (68MOA ring & 1 MOA dot).
- Green Reticle – 6x easier to see than red during daytime operation.
- Side Button Operation – Compact design and side button operation consumes minimal rail space and is ideal for use with a G33 Magnifier.
- Mount – Quick Detach lever fits 1″ Weaver and MIL-STD 1913 Rails.
- EOTECH HWS Prestige Warranty – Comes with 10 year limited warranty.
Check StockAde Advanced Optics Absolute Cowitness Co-Witness Riser HIGH Mount - Compatible with Trijicon RMR/SRO Swampox Kingslayer/Liberty/Justice Red Dot Sight
- Precision CNC Machined from Aircraft Grade Aluminum with Weight Reducing Trapezoid Cuts.
- This is an riser Optic Mount to attach to the red dot sights to lift the red dot higher to absolute level..
- Compatible with Trijicon RMR type foot footprint/screw pattern/mount holes, there are a few red dot sight sharing this footprints, including ADE....
- Finished in a Matte Black Anodize. Comes with installation screws and allen wrench..
- Does NOT work with ADE RD3 series, Doctor, Burris Fastfire, Vortex Venom/Razor/Viper, Meopta, Insight, Shield RMS/RMSc,Eotech MRDS, Sightmark Mini....
Check StockEOTECH XPS3 Holographic Weapon Sight
- EOTECH XPS3-2 – Holographic Weapon Sight in black with 68MOA ring & (2) 1 MOA dot reticle.
- Night Vision Compatible – Works with all Gen 1-3 night vision devices.
- Compact Design – Leaves more rail space for rear iron sights or magnifier.
- Mount – Compatible with both 1″ Weaver and MIL-STD 1913 Rails.
- EOTECH HWS Prestige Warranty – Comes with 10 year limited warranty.
Check StockEOTECH XPS2 Holographic Weapon Sight
- EOTECH XPS2-2 - Holographic Weapon Sight in black with 68MOA ring & (2) 1 MOA dot reticle.
- Mount - Compatible with both 1" Weaver and MIL-STD 1913 Rails.
- Adjustable Brightness - The XPS2 has 20 brightness settings for use in any lighting scenario.
- Compact Design - Leaves more rail space for rear iron sights or magnifier.
- EOTECH HWS Prestige Warranty - Comes with 10 year limited warranty.
Check StockEOTECH Mini Reflex Holographic Weapon Sight, 6 MOA Dot
- EOTECH EFLX6RWBLK - Mini Reflex Sight in black with 6 MOA dot reticle.
- BUILT TOUGH - Rugged aluminum housing provides durability and dependability in any battle situation.
- CRYSTAL CLEAR - High-tech front glass is clear and distortion- free compared to other red dots that use colors and coatings to display their dot.
- QUICK ACQUISITION - The large, rectangular window allows the user to find the aiming dot quick and easy and provides a greater field-of-view.
- USER FRIENDLY - A top loading battery makes for simple battery changes without the need to remove the optic from the pistol.
Check StockOuterimpact Red Dot Adapter Mount Compatible with Smith & Wesson SD9VE and SD40VE
- Compatible Red Dot Sights (Mounting Screws INCLUDED): Trijicon RMR, Doctor, Insight MRDS, Eotech MRDS, Leupold Delta Point, Leupold Delta Point Pro, Vortex Razor, Vortex Viper, Vortex Venom, Burris Fast Fire 2 & 3, CMORE RTS & STS, Sig Romeo 3, UTG Reflex Micro Dot, Shield RMS (additional screw purchase required), Holosun 407/507c, Kahles Helia, Springfield Hex Dragonfly, Bushnell RXS 100 and 250, Crimson Trace CTS 1252.
- Compatible Guns: S&W SD9VE and S&W SD40VE.
- Dimensions: Length: 2.02' Width: 1.0' Thickness: 0.13'.
Check StockEOTECH EXPS3 Holographic Weapon Sight
- EOTECH EXPS3-2 – Holographic Weapon Sight in TAN with 68MOA ring & (2) 1 MOA dot reticle.
- Night Vision Compatible – Works with all Gen 1-3 night vision devices.
- Side Button Operation – Compact design and side button operation consumes minimal rail space and is ideal for use with a G33 Magnifier.
- Mount – Quick Detach lever fits 1″ Weaver and MIL-STD 1913 Rails.
- EOTECH HWS Prestige Warranty – Comes with 10 year limited warranty.
Check StockEOTECH EXPS3 Holographic Weapon Sight
- EOTECH EXPS3-2 - Holographic Weapon Sight in black with 68MOA ring & (2) 1 MOA dot reticle.
- Night Vision Compatible - Works with all Gen 1-3 night vision devices.
- Side Button Operation - Compact design and side button operation consumes minimal rail space and is ideal for use with a G33 Magnifier.
- Mount - Quick Detach lever fits 1" Weaver and MIL-STD 1913 Rails.
- EOTECH HWS Prestige Warranty - Comes with 10 year limited warranty.
Check Stock