Reviews Engine Vacuum Pump

OTC Water Pump Holding Tool

  • ...with plastic cover, and 18" long rubber hose, brass parts for anti-corrosion and durability. The pneumatic vacuum refiller firstly uses the workshop air to pump the cooling system and form a vacuum, and then pumps the coolant into the system. Add coolant under vacuum environment, there is no large cavitation, avoid engine warping and other damage..
  • A water tank pressure leak tester and vacuum purge fill tool kit is very helpful on troubleshooting, save money and time. If there is a small leak in cooling system, or if you add coolant without vacuum, can cause many problems or even a damaged engine, this kit is much cheaper than the maintenance cost or a new engine. And normally, the tools take about 10 minutes to test leak and 5-10 minutes to refill coolant. Simple operation and save time..
  • Thermometer uses stainless steel material, with scale range 0 - 200℃(32 - 400℉). Blue plastic case keeps the color coded 21PCS adapters on place, and you can conveniently choose the right one according to the marked picture on instruction. Equipped 2 air plugs, American and European styles, it is widely applicable to your existing air hose. And we also supply 1 year warranty, please feel free to purchase..
Check Stock

RKX 2.0T Vacuum Pump Reseal Rebuild Kit Compatible With VW Audi 2.0 T TFSI MK6 GTI GLI A3 MK7

  • RKX vacuum pump reseal kit compatible with Volkswagen Audi 2.0 T TFSI Engine Fits Pump part # 06H145100AD/AB/AK (see compatibility table below).
  • Includes all needed gaskets to rebuild the 2.0t TFSI vacuum pump and stop it from leaking oil. The Dealership does not sell this kit as a spare part.....
  • Our custom injection molded seals are made from military grade Fluorocarbon and designed to hold up under the extreme conditions of your engine..
  • Resealing your pump is cost effective and easy! Our kits included everything needed to seal your pump and stop it from leaking oil..
  • Compatible with: 2008.5 + Jetta, GLI, GTI, Golf, Passat, and A3, TT.
Check Stock

kweiny Pneumatic Fluid Extractor for Automotive Brake and Clutch and Power Steering Fluid

  • Easy to pump Multi-fluid out: The oil extractor works by sucking the oil from the crankcase through a thin hose inserted in the dipstick opening then you pump repeatedly to create a vacuum that pulls the hot oil into an easy-to-carry container with 6L capacity. You can pump any type of fluid, like engine oil, transmission, radiator coolant, water, and more without much effort and mess..
  • Multi-size Hoses: There are four size hoses for your choice if you buy a Kemimoto oil vacuum pump extractor: 2.5mm/ 4mm/ 6mm/ 8mm to apply different engine or machine..
  • Wide Application: Fluid pump extractor evacuates fluids directly from dipstick tubes.
  • At 6 liters of capacity, this manual oil and fluid pump can be used as an oil change pump extractor and fluid transfer pump on most light and heavy duty vehicles, tractors, garden gas mowers, marine engines, small aircraft engines, industrial gear boxes, and coolant and hydraulic systems, etc..
  • Perfect Tool for DIY'er: This handy manual oil pump extractor is the perfect design for professional and DIY mechanics to remove the oil easily and quickly and a pour spout is included to help empty containers for recycling the oil..
  • Product Feature: This 6L fluid capacity hand pump is made of HDPE durable material and a shut....
Check Stock

DASBET Car Vacuum and Fuel Pump Tester Gauge Kit, Fuel Pump and Vacuum Tester Gauge, Leak Carburetor Pressure Diagnostics

  • Function: The Carburetor Carb Valve Fuel Pump Pressure & Vacuum Tester Gauge Test Kit enables testing of the fuel delivery pressure to the engine to check for worn or defective parts in fuel pumps and vacuum systems.
  • Professional Tester Kit: Fuel Pump Pressure & VacuumTester Gauge Kit, Carburetor Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts.
  • Diagnose leaking valves, incorrect timing, leaky intake manifolds, and clogged mufflers. Fuel pump operating pressures up to 10 PSI (0.7 Bar), Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSI (0-0.7 kg/cm²) pressure.
  • Easy-to-use: Includes a variety of adapters ideal for most vehicles.
  • 4-inch (10.2cm) diameter pressure gauge with color-coded measurement scales, 1.2-inch (3cm) thickness with rubber side notches, easy to read and grip.
  • Extra-long rubber hose and 14mm/18mm manifold adapter.
  • Rubber hose 40 PSI (2.8 Bar) maximum working pressure.
  • Easy Storage: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
Check Stock

Calvana (2-Pack) Replacement for (Compatible with) Briggs and Stratton 596163 Vacuum Hose - 3.25 Inches Black Rubber Vacuum Hose - Fits Most 401577, 405577, and 406777 Series Small Gasoline Engines

  • ...ATIBLE WITH BRIGGS AND STRATTON 596163 VACUUM HOSE - This product replaces Briggs and Stratton part number 593998. The pack contains 2 3.25-inch black rubber vacuum hoses that meet OEM specifications for the replacement part size and quality. Made of durable rubber, these hoses will restore your Briggs and Stratton engine’s optimum performance..
  • FITS MOST 401577, 405577, AND 406777 SERIES SMALL GASOLINE ENGINES - These hoses are compatible with Briggs and Stratton single-cylinder and v-twin riding and walk-behind mower engines. They are also compatible with horizontal engines used on utility equipment like pressure washers, pumps, and more. Other compatible engine model series include select 40N877 (John Deere D100 (2011-2012 series)) and 44N677 (John Deere E100 series) engine series..
  • DOUBLE-CHECK YOUR BRIGGS AND STRATTON ENGINE MODEL-TYPE-CODE - First, locate the engine model number, type, and code to ensure that you are purchasing the right replacement part for your Briggs and Stratton small gasoline engine. Using an incompatible vacuum line may cause further leaks or cause the engine to run erratically..
  • OEM-QUALITY BUT MORE AFFORDABLE - Though this replacement part is not very difficult to find, an affordable option is almost unheard of. But for ....
Check Stock

BTSHUB Fuel Pump & Vacuum Tester Gauge Leak Carburetor Pressure Diagnostics Tool Kit

  • Professional Tester Kit: Fuel Pump Pressure & VacuumTester Gauge Kit, Carburetor Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts.
  • Diagnose leaking valves, incorrect timing, leaky intake manifolds, and clogged mufflers. Fuel pump operating pressures up to 10 PSI (0.7 Bar), Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSI (0-0.7 kg/cm²) pressure.
  • Applications: This tester will test fuel pump pressure and all vacuum operated devices, 4 tests can be performed – Fuel pump pressure, fuel pump vacuum, carburetor intake manifold, and vacuum test.
  • Easy-to-use: Instruction manual included.
  • Includes a variety of adapters ideal for most vehicles.
  • 4-inch (10.2cm) diameter pressure gauge with color-coded measurement scales, 1.2-inch (3cm) thickness with rubber side notches, easy to read and grip.
  • Extra-long rubber hose and 14mm/18mm manifold adapter.
  • Rubber hose 40 PSI (2.8 Bar) maximum working pressure.
  • Easy Storage: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
  • Package Includes: 1x Gauge,1x 24-inch long rubber hose 40 PSI,1x brass cone adapter,2x plastic connector,1x 1/4" x18 male to 1/8" -27 female brass adapter,1x 1/8”-27....
Check Stock

OEMTOOLS 24938 9.5L Pneumatic/Manual Fluid Extractor, Manual and Pneumatic Oil Extractor, Fluid Vacuum Extractor, Vacuum Evacuator

  • Carefree Car and Boat Care: Easily remove engine oil, transmission fluid, power steering fluid, gear oil, coolant, and more with this versatile fluid evacuator pump.
  • Double Duty: For pneumatic extraction, insert the suction hose in the vacuum extractor pump receiving hole.
  • Manually suction fluid with the engine oil pump's oversized handle.
  • Don’t Cry Over Spilled Oil: The 9.5-gallon reservoir is a solid one-piece tank that can't leak out the bottom.
  • The built-in shutoff prevents overfilling the extractor pump reservoir.
  • Time Flies: Draining oil from beneath a vehicle takes eons.
  • The fluid pump's 5ft hose and dipstick adapter extracts automotive fluid directly from the dipstick tube.
  • Under Pressure: Change transmission fluid anytime with the pneumatic and manual pumping options.
  • This fluid extractor pump works at 85 PSI and a max pressure of 120 PSI.
Check Stock

ATPEAM Vacuum and Fuel Pump Tester Gauge Kit, Fuel Pump Pressure & Vacuum, Carburetor Intake Manifold, & Vacuum Test

  • ...nch (3cm) thickness with rubber side notches, easy to read and grip.
  • Extra-long rubber hose and 14mm/18mm manifold adapter.
  • Rubber hose 40 PSI (2.8 Bar) maximum working pressure.
  • Professional Tester Kit: Fuel Pump Pressure & VacuumTester Gauge Kit, Carburetor Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts.
  • Diagnose leaking valves, incorrect timing, leaky intake manifolds, and clogged mufflers. Fuel pump operating pressures up to 10 PSI (0.7 Bar), Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSI (0-0.7 kg/cm²) pressure.
  • Easy Storage: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
  • Package Includes: 1x Gauge,1x 24-inch long rubber hose 40 PSI,1x brass cone adapter,2x plastic connector,1x 1/4" x18 male to 1/8" -27 female brass adapter,1x 1/8”-27 male to 7/32" barbed brass fitting adapter,1x 1/8"-27 female to 3/8" male brass adapter,1x T-type 7/32" barded fitting adapter.
Check Stock

JEGS Electric Vacuum Pump Kit | Provides Between 18” - 22” Hg of Vacuum | Includes Vacuum Pump, Hose, Switch & Pigtail, Vibration Isolators, 10 Amp Fuse, 12 Volt DC / 84 Watt Relay, and Hardware

  • PROVIDES THE NECESSARY VACUUM FOR POWER BRAKES when the camshaft has been upgraded or the engine doesn’t supply more than 16” of vacuum.
  • MAINTAINS BETWEEN 18” - 22” Hg OF VACUUM for proper operation of power brake booster.
  • INCLUDES: Vacuum Pump, Hose, Switch & Pigtail, Vibration Isolators, 10 Amp Fuse, 12 Volt DC / 84 Watt Relay, and Hardware.
  • COMPACT DESIGN fits in most engine compartments.
  • EASY TO INSTALL with included instructions.
Check Stock

ABN Car Vacuum and Fuel Pump Tester Gauge Kit – Fuel Pump Pressure & Vacuum Carburetor Intake Manifold & Vacuum Test

  • DIAGNOSE YOUR VEHICLE: The ABN Car Vacuum and Fuel Pump Tester Gauge Kit – Fuel Pump Pressure & Vacuum, Carburetor Intake Manifold, & Vacuum Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts in fuel pumps and vacuum systems.
  • Set includes a variety of adapters suitable for most vehicles.
  • Intended for carburetor engines with a mechanical fuel pump operating pressures below 10 PSI (0.7 Bar).
  • 4-IN-1 KIT: 4 tests can be performed – Fuel pump pressure, fuel pump vacuum, carburetor intake manifold, and vacuum test.
  • When reading the pressure gauge, occasional needle drop indicates that the carb or tappets need an adjustment plug, missing or stuck valve, or trouble in carburetor.
  • Steady, regular drop indicates that the valve is held open, burnt, or chipped.
  • Wide pressure fluctuation at high speeds indicates a weak valve spring.
  • Steady drop to zero pressure indicates a choked muffler.
  • EASY TO USE: Assembly and operating instruction manual included.
  • Pressure gauge has a 4-inch (10.2cm) diameter with color-coded measurement scales so it is easy to read and a 1.2-inch (3cm) thickness with rubber side notches for easy grip.
  • Extra-long rubber hose and 14mm/18mm manifold adapter.
Check Stock

Actron CP7802 Vacuum and Fuel Pressure Tester Kit

  • Vacuum and fuel pressure tester is easy-to-read and has a 2-1/2 white face.
  • Checks the mechanical condition of the engine and vacuum control system function.
  • Diagnoses leaks in the intake manifold, manifold and head gaskets, piston rings, valves and vacuum lines.
Check Stock

EWK 6.5L Manual Oil Extractor Pump Vacuum Oil Changer for Automobile Fluids Evacuation

  • 【 Humanized Design 】 With EWK oil extractor pump, the engine oil or transmission fluid can be easily and cleanly extracted directly through the dipstick tube, and the sealing cap is attached to prevent the liquid from spillage during transport..
  • 【 Easy Operation 】 The manual fluid evacuator requires no other equipment to use with. With a good number of strokes on the sturdy handle, the pump will create vacuum that triggers a powerful suction to help you change oil efficiently..
  • 【 No Oil Left 】 The vacuum oil changer comes with 2 sizes of upgraded extra-long tubes with different diameter. Slide it as far as possible to reach the very bottom of your reservoir and suck up every drop of oil..
  • 【 Wide Application 】Perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Applicable for car, motorcycle, lawn mower, boat, jet ski and etc. *Note: Gasoline and fluids with high volatility, high corrosion, high alkalinity and high temperature are FORBIDDEN to be used on the extractor..
  • 【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Contact us if you need further assistance..
Check Stock

EKDJKK Carburetor Gauge Vacuum Synchronizer Gauge 2/3/4 Cylinder Sync Gauges Kit Testing Vacuum Gauge Kit Balancer Carburetor Synchronizer Motorcycle Accessory

  • 【Fits Your Applications】Carburetor adjustment tool kit Can also be used for most standard 2 to 4 carburetor systems.
  • 4 cylinder carburetor synchronizer carb sync tool works on your motorcycle, race car, and auto A/C vacuum motor.
  • 【Efficient】Quickly and accurately check the compression on the gasoline engine, the simple pressure release button on the side of the tester..
  • 【Easily Synchronize Your Carburetors】Before each use, confirm carb sync gauges are zeroed out - Recalibrate, if necessary.
  • Attach your carburetor flanges to the 4 carb synchronizer tool, idle your engine, and adjust screws between the carburetors into alignment.
  • Synchronize to manufacturer specifications.
  • 【Features】This kit allows you to synchronize the values of 4 carburetors, as well as adjust or set them. Tests both mechanical and electrical fuel pumps, and checks for worn or defective parts in fuel pump and vacuum system..
  • 【Package Includes】1 x Vacuum Synchronizer Gauge, 2 x Vacuum Hoses, 4 x Connectors, 4 x Carb Extension Rods.
Check Stock