Reviews Engine Seals

Small Block Chevy Overhaul Gasket Set, 350 Chevy, 67-'85

  • Application Range: It fits 1957-1979 small block 283, 307, 327, 350 and 383 V8 engines with a 2 piece rear main seal and left hand oil pan dipsticks. It includes all the necessary gaskets and seals for one complete engine repair..
  • Application Range: It fits 1957-1979 small block Chevy 283, 307, 327, 350 and 383 V8 engines with a 2 piece rear main seal and left hand oil pan dipsticks. It includes all the necessary gaskets and seals for one complete engine repair..
  • Premium Quality: Gaskets provide a reliable means of repairng your engine for your daily street cruiser, tow vehicle, street rod, circle track, dirt track, and drag strip performance racing engines.
  • Gasket set includes the following pieces: Cylinder head gaskets, intake manifold gaskets, valve cover gaskets, exhaust manifold gaskets, timing cover gasket, timing cover seal, oil pan gaskets, water pump gaskets, fuel pump gasket, thermostat water outlet housing gaskets, distributor gasket, o ring valve stem seals, and rear main seal..
Check Stock

Liqui Moly Motor Oil Saver 300 ML - 2 Pack

  • Reduces oil consumption via the piston rings and valve guides.
  • Prevents leaks due to leaks at elastomeric seals.
  • Regenerates engine seals made of plastic and rubber.
  • Prevents pollution of the environment due to oil dripping from the engine.
Check Stock

STAR BRITE Descaling Motor Flush - 1 GAL 092600

  • Removes scale and deposits from all marine engines.
  • Will not damage engine seals, gaskets or rubber impellers.
  • Engine seals, gaskets or rubber impellers, deposits from all marine engines.
Check Stock

NO LEAK 20401 Engine Oil Stop Leak, 16 Fl oz.

  • Stops AND prevents engine oil leaks caused by dried, shrunken, or harden seals.
Check Stock

Liqui Moly 20328 Special Tec AA SAE 0W-16 Motor Oil 5 Liter

  • Reduces oil consumption via the piston rings and valve guides.
  • Prevents leaks due to leaks at elastomeric seals.
  • Regenerates engine seals made of plastic and rubber.
  • Prevents pollution of the environment due to oil dripping from the engine.
Check Stock

FEL-PRO VS 50442 R Valve Cover Gasket Set

  • BRTEC Automotive Replacement Head Gasket Sets Package List- Head Gasket, Intake & Exhaust Manifold Gasket, Valve Cover Gasket, Viton Valve Stem Seals/ Grommets, Other O-Rings/ Seals, Other Small Gaskets, and Other Engine Sealing Kits.
  • ( Please refer to the first image to confirm the components you may receive, we always check every package before shipment, please massage us for a replacement if there are missing parts after you receiving the package )..
  • Head Gasket Part Number: ES71313, HS26181PT, HS26181PT-1, HS26181PT-3, TS2618100HBSI.
  • Check Before Purchasing - Please check the description or use the year/make/model drop down bar and interchange part numbers to confirm the compatibility before purchas....
Check Stock

Liqui Moly Oil Smoke Stop 300 ml 2122 Designed to minimize blue exhaust smoke

  • Reduces oil consumption via the piston rings and valve guides.
  • Prevents leaks due to leaks at elastomeric seals.
  • Regenerates engine seals made of plastic and rubber.
  • Prevents pollution of the environment due to oil dripping from the engine.
Check Stock

James Gasket Transmission to Engine Interface Gasket JGI-35607-06

  • with the latest materials and technology in gasket production to Vertex specifications..
  • Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs..
  • Vertex's replacement gaskets and seals are available as a top end kits, complete engine kits, or as an oil seal kit..
  • One kit containing all of the gaskets, O-rings, and valve seals necessary to rebuild the entire engine and transmission..
Check Stock

NICECNC 16PCS B series Valve Cover Washer Seals Bolt Nuts Kit B16 B18 VTEC Engines Compatible with Honda Civic Si 1999-2000 Prelude DOHC 1992-2001 Compatible with Acura Integra 1990-2001, Red

  • The billet aluminum valve cover washer seals and nut kit is CAD Designed and Made out of Aircraft Quality Precision Machined T6061 Billet Aluminum..
  • Anodized using a unique hard Anodizing Process for a Long Lasting Finish and Lifetime durability.These use the highest quality VITTON seals for the ultimate in oil containment and durability..
  • Add that last finishing touch to engine compartment with these all new billet valve cover washer and seals..
  • The billet valve cover seals and nuts are specifically designed and engineered to keep your valve cover in place and not leak..
  • Replaces the factory old valve cover washers seal and nuts, guaranteed to make your engine Look way better..
Check Stock

Engine Oil Cooler Filter Housing Kit with Gaskets, Cap & Seals - Replaces 55566784, 88179-91400 - Compatible with Buick & Chevy 1.4L Vehicles - Encore, Cruze, Cruze Limited, Sonic, Trax

  • Replacement Engine Oil Cooler & Filter Housing Assembly - With Gaskets, Cap & ACM Seals - Keeps the engine oil clean and cool as it circulates through the engine. This replacement Oil Filter Housing Adapter Kit also comes with a new oil filter pre-installed for a complete and worry free installation. If you are experiencing oil leaks above the transmission or near the cooler housing where the oil filter is then you may have a problem with your oil cooler and filter housing..
  • Compatible Replacement for Buick & Chevrolet Vehicles with 1.4L L4 Engine - 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 Encore | 2011-2015 Cruze | 2016 Cruze Limited | 2012-2018 Sonic | 2013-2021 Trax |. The oil filter housing can easily be located above the engine and can be accessed by removing the intake manifold..
  • Replaces Part# 55566784, 918-428, 650039, 88179-91400, 55593189, 55594651, 55565385, 55565388 usually found on popular Encore, Cruze, Cruze Limited, Sonic Trax including year models 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21. It is best and practical to replace the whole housing rather than waste time trying to find where the leak is as it can be from the cracks on the housing or seals..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM....
Check Stock

Engine Oil Cooler Kit - Compatible with Ford Trucks - Powerstroke 6.0L V8 F250, F-350, F450, F550 Super Duty, Excursion, E350, E-450 - Replaces Part 904-228, OCK388, 3C3Z 6A642 CA - Gasket Seal Kit

  • Replacement Engine Oil Cooler With Gasket Seals & O-Rings - Is a heat-exchanger which is commonly a radiator type of cooler which cools engine oil from the engine. It removes excess heat from the oil using the engine coolant that flows around as the engine oil passes through the cooler. The engine oil cooler can be located under the intake above the engine..
  • Compatible Replacement for Ford Vehicles - 2004 - 2005 E-350 Club Wagon | 2004 - 2010 E-350 Super Duty | 2004 - 2007 E-450 Super Duty | 2003 - 2005 Excursion | 2003 - 2007 F-250 Super Duty | 2003 - 2007 F-350 Super Duty | 2003 - 2007 F-450 Super Duty | 2003 - 2007 F-550 Super Duty |..
  • Replaces Part# 3C3Z 6A642 CA, 904228, 904-228, 015339, OCK388, 3C3Z-6A642-CA, 3C3Z6A642CA - If you are noticing engine oil in your coolant system, oil or coolant leaking from the oil cooler or engine coolant mixed with your engine oil then your oil cooler might need to be looked at or replaced. This engine oil cooler kit also includes viton gasket seals needed for the proper service on your vehicle..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and it will fit and work exactly like the factory part. This part is commonly found on popular Powerstroke 6.0 V8 models....
Check Stock

Mobil 1 120766 Extended Performance 5W-30 Motor Oil - 5 Quart 3 Pack…

  • helps prevent deposits and sludge build-up to enable long engine life.
  • Excellent overall lubrication and wear protection performance under many operating conditions.
  • precise balance of performance additives.
  • Helps provide outstanding engine protection.
  • outstanding thermal and oxidation stability.
  • Helps maintain long engine life and is compatible with engine seals.
Check Stock

Hodenn Motor Engine Lifting Plate Bracket Carb Carburetor Hoist SBC BBC Fit For Chevy Ford

  • Motor Engine Lifting Plate Bracket Plate thickness is 3/16”..
  • Hole sizes include: 1/4”, 3/8”, 3/8” x 5/8”, 3/4” x 3/8” and 1 1/2” x 1 1/2”..
  • Gold anodized plate,drop forged steel construction Zinc plated for durability..
  • Easy engine swaps,allows engine to be lifted with an engine hoist..
Check Stock