Reviews Engine Rebuild Kit With Rocker Arms

Michigan Motorsports LS1 Rocker Arms and Bolts with Trunion Kit Installed FITS LS2 LS6 LQ4 LQ9 LM7 4.8 5.3 5.7 6.0

  • ...EM needle bearings and powdered metal trunion with a premium 8620 steel alloy trunion and caged roller bearings for added durability. The caged roller bearings that greatly reduce the possibility of the bearing failure experienced with stock LS1 needle bearings, which can send loose needles throughout the engine upon failure..
  • LS1 style allen head bolts are included for installation. Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor.
  • This kit includes: 16 LS Series Rocker Arms 16 rocker arm trunnions- LS-type retrofit 32 rocker arm bearings- LS-type retrofit 32 rocker arm retaining rings- LS-type retrofit 16 bolts for LS trunnion kit.
  • Fits all these applications: LS1/LS2/LS6/ LR4 Vortec 5300 LM7 L59 LM4 L33 – 4.8/5.3/5.7/6.0/ Engines.
Check Stock

Brian Tooley LS1 Rocker Arm Trunion & Bolt Kit 4.8 5.3 5.7 6.0 6.2 Trunnion BTR

  • Brian Tooley LS Rocker Arm Upgrade Trunion Kit Includes Allen Head Bolts.
  • These LS Series retrofit trunion kits are designed to convert stock LS Series rocker arms into captured roller bearing rocker arms. The factory bearings are a known failure on the LS Engines. When they fail they send small bearings through the entire engine. The upgraded trunions use a captured roller bearing allowing for a reliable smooth rotation..
  • The upgraded trunions also give more stability at higher RPM. We use these trunion kits in anything from stock 4.8's all they way up to 1,000+hp turbo motors.The stock factory LS rocker arms are very strong and very light. Once you upgrade the bearings and trunions the rocker arms handle similar to very expensive roller rocker arms (at a fraction of the cost)..
  • These are a must have for anyone installing a aftermarket Cam, Supercharger, Turbo or Nitrous..
  • Used on all LS style rocker arms including the following: LS1 LS2 LS3 LS6 L99, LS4, LS9 LSA LQ4 LQ9 L76 L92 LR4 LM7 L59 LM4 L33 L98 L77 LY6 LFA LZ1 LY2 L20 LMF LH6 LY5 LMG LC9 LH8 LS4 4.8 5.3 5.7 6.0 6.2.
Check Stock

Brian Tooley LS1 Rocker Arm Trunion Kit 4.8 5.3 5.7 6.0 6.2 Trunnion – No bolts

  • Brian Tooley LS Rocker Arm Upgrade Trunion Kit Doesn’t include upgraded bolts – stock bolts can be used..
  • These LS Series retrofit trunion kits are designed to convert stock LS Series rocker arms into captured roller bearing rocker arms. The factory bearings are a known failure on the LS Engines. When they fail they send small bearings through the entire engine. The upgraded trunions use a captured roller bearing allowing for a reliable smooth rotation..
  • The upgraded trunions also give more stability at higher RPM. We use these trunion kits in anything from stock 4.8’s all they way up to 1,000+hp turbo motors.The stock factory LS rocker arms are very strong and very light. Once you upgrade the bearings and trunions the rocker arms handle similar to very expensive roller rocker arms (at a fraction of the cost)..
  • These are a must have for anyone installing a aftermarket Cam, Supercharger, Turbo or Nitrous..
  • Used on all LS style rocker arms including the following: LS1 LS2 LS3 LS6 L99, LS4, LS9 LSA LQ4 LQ9 L76 L92 LR4 LM7 L59 LM4 L33 L98 L77 LY6 LFA LZ1 LY2 L20 LMF LH6 LY5 LMG LC9 LH8 LS4 4.8 5.3 5.7 6.0 6.2.
Check Stock

Kawasaki Mule 600/610 / SX Engine Rebuild Kit with OEM Piston, OEM Piston Rings, OEM Piston Pin, Oil Seals, & Gaskets

  • Complete engine rebuild kit for all the 600 / 610 / SX Mules.
  • The kit includes: Piston, Piston Pin, Piston Rings, 8 Bolts, Oil Seals, Rocker Case Gasket, Carb Head Gasket, Head Gasket, Crankcase Cover Gasket..
  • *Free & Fast Priority USPS (Postal) Mail ONLY. Please include your post office box if you do not receive mail at your physical address..
Check Stock

PCE by Speedmaster PCE435.1067 Fits Chevy BBC 454 Hyd FT Cylinder Head Top End Engine Combo Kit

  • 【Great Compatibility】A perfect repairing kit for Detroit diesel 60 series engines..
  • 【J-35641-A Cylinder Head Lift Bracket】 This tool is attached to the cylinder head and used to lift the cylinder head from the engine..
  • 【J-35996-A Rocker Arm Lifter】Used to easily lift the rocker arms from the engine without damage to the car parts. Helps for removing all the rocker shaft mounting bolts and nut from the front or rear rocker shaft assembly..
  • 【Superior Material】Made from high grade and heavy duty steel with black anti-oxidant coating, corrosion and rust resistance, sturdy and durable..
  • 【100% Satisfaction Guarantee】If you're not satisfied with this set, simply return it for a full refund in 30 days. While you have any questions about our products, please feel free to contact us and we will provide the best service. Always buy confidently in Bonbo!.
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit 4.8 5.3 5.7 6.0 LS1 LS2

  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets more lubrication and has less load applied to it than the bushing in the small end of a connecting rod, giving it long service life..
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit Includes LS1 Rocker Arm Support Pedestal Stands Pair 4.8 5.3 5.7 6.0 LS1 LS2

  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets more lubrication and has less load applied to it than the bushing in the small end of a connecting rod, giving it long service life. Includes two stands - enough for both heads.
Check Stock

JINFANNIBI Complete Engine Gasket Seal Kit Compatible for EZGO Golf CARTS 295cc 350cc 1991-2002 Fuji Robin Engine Cycle Gas Golf Cart

  • ✅【COMPATIBLE】Fits EZGO 295cc 350cc 4 cycle Gas Golf Cart 1991-2008 Robins Fuji 295 (Eh29) Pre-Mci 350 (Eh35) Pre-Mci.
  • ✅【MOST COMPLETE KIT】CartClan engine gasket seal rebuild kit is extremely comprehensive and can be used with different accessories according to....
  • ✅【HIGH QUALITY】Each part is manufactured with the best materials and high technology to ensure long engine life and the most efficient....
  • ✅【PACKAGE CONTENT】EZGO Gas Golf Cart Engine Gasket and Seal Kit x 1 Set.
  • ✅【EXCELLENT AFTER-SALES SERVICE】If you're not 100% satisfied with this EZGO Engine Gasket Seal Rebuild Kit, simply return it for a full refund....
Check Stock

James Gasket Transmission to Engine Interface Gasket JGI-35607-06

  • with the latest materials and technology in gasket production to Vertex specifications..
  • Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs..
  • Vertex's replacement gaskets and seals are available as a top end kits, complete engine kits, or as an oil seal kit..
  • One kit containing all of the gaskets, O-rings, and valve seals necessary to rebuild the entire engine and transmission..
Check Stock

Brian Tooley BTR Trunnion Kit V2 Rocker Arm Trunion LS1 LS3 4.8 5.3 5.7 6.0 6.2

  • BTR Trunnion Kit V2 Rocker Arm Trunion Kit. The all new Trunnion Kit V2 features a Trunnion with pre-installed inner race bearings..
  • The V1 kits have stood up to an enormous amount of abuse, but BTR decided to upgrade the to a pressed inner race comprised of 52100 Heat Treated Bearing Steel, over the more commonly used 8620 Carburized Steel found in our V1 kits and many OEM applications..
  • The upgraded trunions also give more stability at higher RPM. We use these trunion kits in anything from stock 4.8’s all they way up to 1,000+hp turbo motors.The stock factory LS rocker arms are very strong and very light. Once you upgrade the bearings and trunions the rocker arms handle similar to very expensive roller rocker arms (at a fraction of the cost)..
  • Additionally, these feature a self oiling axle with priority feeding to the Trunnion itself..
  • FOR LS1/LS3/99-13 LS TRUCK STYLE ROCKERS. Used on all LS style rocker arms including the following: LS1 LS2 LS3 LS6 L99, LS4, LS9 LSA LQ4 LQ9 L76 L92 LR4 LM7 L59 LM4 L33 L98 L77 LY6 LFA LZ1 LY2 L20 LMF LH6 LY5 LMG LC9 LH8 LS4 4.8 5.3 5.7 6.0 6.2.
Check Stock

Wiseco PWR119-104 Garage Buddy Complete Engine Rebuild Kit

  • Fits: Kawasaki KX85 2001-2005, with 48. 5mm Piston Bore.
  • Wiseco's Garage Buddy complete engine rebuild kit offer everything you need for a bottom and top end rebuild with everything included in one box.
  • Wiseco crankshafts are designed completely by in-house engineers, who determine all assembled dimensions, clearances, materials, and specifications.
  • Garage Buddy kits come with a Wiseco standard forged piston, which offers stock compression and more reliability and longevity, thanks to the benefits of the forging process.
  • Includes: Crankshaft assembly, OEM quality main bearings, All engine gaskets, seals, and O-rings, Wiseco standard series forged piston kit (piston, ring(s), pin, clips), Small end bearing (for two-strokes), Cam chain (for four-strokes), and Hour meter with mounting bracket and hour meter decal.
Check Stock

COMP Cams 1212-16 High Energy Rocker Set w/ 1.5 Ratio for Chevrolet Small Block w/ 3/8\ Stud

  • Excellent replacement rocker arms for engine rebuilds with a stock or High Energy Camshaft.
  • Help to eliminate noise and slop associated with worn or high mileage stock rocker arms.
  • Include adjusting nuts and pivot balls where required.
  • Feature a long slot for higher than stock lift camshafts.
Check Stock

CV Carburetor Rebuild Kit for Harley Davidson CV40 27421-99C 27490-04 XL883 CV 40mm Carb Repair Kit 27421-99A Rebuild Kit,CV40 Rebuild Kit,CV Carb Rebuild Kit,CV Carb Jet Kit by BOOTOP

  • CV Carburetor Rebuild Kit,CV Carb Repair Kit for Harley Davidson CV40 CV 40mm XL883 XL1200 carb engine. CV Rebuild Kit Replaces part number:....
  • This CV Carburetor Rebuild Kit For Harley include Main Jet,Pilot Jet,gaskets, o-rings,accelerator pump diaphragm, float needle, carburetor carbon dirt....
  • CV Carb Rebuild Kit works with Harley Davidson 1996 - 2006 1200 Custom XLC, 2006 1200 Low XL, 2004 - 2006 1200 Roadster XLR, 1996 - 2003 1200 Sport....
  • CV Carb Repair Kit for 1990 - 2005 Electra Glide Classic FLHTC,1995 - 2006 Electra Glide Standard FLHT, 1990 - 1999 Electra Glide Ultra Classic....
  • No instructions.Recommended professional installation or on the Internet to find the relevant installation video for reference.180 Days Warranty.Feel....
Check Stock