Reviews Engine Rebuild Kit Ls1

James Gasket Transmission to Engine Interface Gasket JGI-35607-06

  • with the latest materials and technology in gasket production to Vertex specifications..
  • Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs..
  • Vertex's replacement gaskets and seals are available as a top end kits, complete engine kits, or as an oil seal kit..
  • One kit containing all of the gaskets, O-rings, and valve seals necessary to rebuild the entire engine and transmission..
Check Stock

Michigan Motorsports LS1 Rocker Arms and Bolts with Trunion Kit Installed FITS LS2 LS6 LQ4 LQ9 LM7 4.8 5.3 5.7 6.0

  • ...EM needle bearings and powdered metal trunion with a premium 8620 steel alloy trunion and caged roller bearings for added durability. The caged roller bearings that greatly reduce the possibility of the bearing failure experienced with stock LS1 needle bearings, which can send loose needles throughout the engine upon failure..
  • LS1 style allen head bolts are included for installation. Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor.
  • This kit includes: 16 LS Series Rocker Arms 16 rocker arm trunnions- LS-type retrofit 32 rocker arm bearings- LS-type retrofit 32 rocker arm retaining rings- LS-type retrofit 16 bolts for LS trunnion kit.
  • Fits all these applications: LS1/LS2/LS6/ LR4 Vortec 5300 LM7 L59 LM4 L33 – 4.8/5.3/5.7/6.0/ Engines.
Check Stock

Wiseco PWR119-104 Garage Buddy Complete Engine Rebuild Kit

  • Fits: Kawasaki KX85 2001-2005, with 48. 5mm Piston Bore.
  • Wiseco's Garage Buddy complete engine rebuild kit offer everything you need for a bottom and top end rebuild with everything included in one box.
  • Wiseco crankshafts are designed completely by in-house engineers, who determine all assembled dimensions, clearances, materials, and specifications.
  • Garage Buddy kits come with a Wiseco standard forged piston, which offers stock compression and more reliability and longevity, thanks to the benefits of the forging process.
  • Includes: Crankshaft assembly, OEM quality main bearings, All engine gaskets, seals, and O-rings, Wiseco standard series forged piston kit (piston, ring(s), pin, clips), Small end bearing (for two-strokes), Cam chain (for four-strokes), and Hour meter with mounting bracket and hour meter decal.
Check Stock

CV Carburetor Rebuild Kit for Harley Davidson CV40 27421-99C 27490-04 XL883 CV 40mm Carb Repair Kit 27421-99A Rebuild Kit,CV40 Rebuild Kit,CV Carb Rebuild Kit,CV Carb Jet Kit by BOOTOP

  • CV Carburetor Rebuild Kit,CV Carb Repair Kit for Harley Davidson CV40 CV 40mm XL883 XL1200 carb engine. CV Rebuild Kit Replaces part number:....
  • This CV Carburetor Rebuild Kit For Harley include Main Jet,Pilot Jet,gaskets, o-rings,accelerator pump diaphragm, float needle, carburetor carbon dirt....
  • CV Carb Rebuild Kit works with Harley Davidson 1996 - 2006 1200 Custom XLC, 2006 1200 Low XL, 2004 - 2006 1200 Roadster XLR, 1996 - 2003 1200 Sport....
  • CV Carb Repair Kit for 1990 - 2005 Electra Glide Classic FLHTC,1995 - 2006 Electra Glide Standard FLHT, 1990 - 1999 Electra Glide Ultra Classic....
  • No instructions.Recommended professional installation or on the Internet to find the relevant installation video for reference.180 Days Warranty.Feel....
Check Stock

Elgin Industries EP108BR Expansion Plug Kit

  • Comes with 4ea Cylinder Head Dowel Pins, 1ea Oil Galley Barbell, 1ea Threaded Coolant Passage Plug, 3ea Threaded Oil Galley Plugs, and 1ea Press in Freeze Plug. Contains all Required Plugs for Completing an Engine Rebuild..
  • Compatible with ALL Chevrolet GM LS Series Engines 1997-2014 (99-2013 4.8L,5.3L,6.0L,6.2L Vortec Truck Engines) LS1, LS2, LS3, LS6, LS7, LS9, GM 4.8L 5.3L 6.0L 6.2L. Also Fits LSX LM7 LR4 LQ4 LQ9 L33 LH6 L92 L76 L99 L96 L82 L83 L84 L86 L87 Engines..
  • We are an AS9100D and ISO 9001:2015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. Parts we produce fly at 30,000 feet where failure is not an option. We put the same quality into every part we produce..
  • When you purchase Z Whip Parts you will always get the highest quality for your vehicle that you rightfully deserve..
Check Stock

FLYPIG Engine Gasket Set Kit Fit for Yamaha PW80 PW PW 80 PY80 80cc 1983-2006 Pit Dirt Bike Moedel Year

  • ✪ Complete PW80 gasket sets are OEM style replacements, including all necessary engine gaskets, O-rings to rebuild a complete engine..
  • ✪ Fit for Yamaha PW80 PY80 All year models..
  • ✪ Exactly what you need to get your bike rebuilt and running right!.
  • ✪ Each kit will contain the exact gaskets, seals, and o-rings you need to re-assemble your top and bottom engine components after a standard rebuild..
  • ✪ Require no trimming or modification!.
Check Stock

Michigan Motorsports Knock Sensor Adapter for 1997-2004 LS1 LS6 Car to LS2 LS3 Knock Sensor

  • Knock Sensor Adapter for 1997-2004 LS1 Car to LS2 Knock Sensor.
  • This harness allows the dual-wire LS2 knock sensors located on side of the LS2 engine block to be plugged into the factory LS1 PCM harness. It has the perfect added length and thermal protection required to be routed near hot exhaust manifolds. Compatible with the PCM harness in LS1 Corvette and F-Body cars..
  • PLEASE NOTE THAT IN ORDER TO USE LS2 KNOCK SENSORS IN A LS1 CAR YOU REQUIRE SPECIAL LS1 PCM SOFTWARE CHANGES OR A LS2 PCM..
  • KEY FEATURES: Fully Plug and Play with the factory harness & sensors Military spec. high-temperature Teflon wire (same type used on oxygen sensors) 24" Length High-temperature (1200F) heat treated protective loom All connections crimped using our computerized crimp-quality monitoring system and then circuit checked for the utmost in reliability..
Check Stock

HOLLEY MODULAR LO-RAM EFI MANIFOLD KIT,TOP-FEED PLENUM,BLACK FINISH,COMPATIBLE WITH GM LS1,LS2 & LS6 GEN III & IV ENGINES

  • Brand New Holley Modular Lo-Ram EFI Manifold Kit, Top-Feed Plenum, Black Finish, Compatible with LS1, LS2 & LS 6 Gen III & IV Engines (Part #300-620BK).
  • The 300-620 top-feed plenum entry configuration is designed to allow the included Hi-Ram 105mm plenum top to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications was conceived to package with an air to water plenum mounted intercooler with a shorter overall height than possible with other existing intake manifolds..
  • The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III & IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The fuel rail kits come with 2 sets of brackets: A set for long (usually standard length) fuel injectors & set for short (such as Pico, or LS7) fuel injectors..
  • NOTE: Total Height: Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top - 9.07" (without intercooler installed) | Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top, w/ intercooler installed - 9.07" + intercooler thickness.
  • Specs: Brand: Holley EFI | Color: Black | Construction: Cast | Emission Code: 3 ....
Check Stock

DNJ HBK3165 Head Bolt Kit/For 1997-2006/ Avanti, Buick, Cadillac, Chevrolet, GMC, Hummer, Pontiac/ 4.8L-6.0L/ V8/ 16V/ OHV/ LM4, LM7, LS1

  • FITS: 97-06 Isuzu, Chevrolet, GMC 4.8L-6.0L V8 OHV Naturally Aspirated LH6,LS1,LM4,-,L59,LM7.
  • FITMENT NOTES: One Set Services Complete Engine, w/ 1st Design, LR4, One Set Services Complete Engine.
  • DNJ Engine Components is a full line provider of Domestic & Japanese engine parts for cars and trucks..
  • We carefully selected DNJ Engine Components as the sole provider. DNJ has a 30+ year track record of quality, experience, and trust. It makes sense for us to carry a brand that would help us earn customer loyalty in the long run.
Check Stock

OYEAUTO Knock Sensor with Harness 12601822 12589867 Compatible with Chevy GMC Cadillac Yukon Tahoe Sierra Silverado Suburban Express 1500 2500 3500 Camaro Corvette Escalade

  • OEnumber:213-3521,213-362,10456603,12589867,8104566030,8125898670,AS10017,SU1282,S8696,KS116,5S2172,SU1282,12597415,15372170,917-033.Please compare....
  • Fitment:Fits engine RPO codes: LS1 LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33,With 4.8L 5.3L 5.7l 6.0L engine | 1999-2006 Chevy Silverado 1500 | 2001-2006....
  • OYEAUTO Knock sensor and harness kit has gone through rigorous test for perfect fit and function that exceeds OEM specifications,Meanwhile the....
  • The knock sensor picks up vibration and sound coming from the engine block, turns it into an electronic signal and sends that signal to the engine....
  • 12 month warranty:During the warranty period,if there is any problem with your knock sensor,please contact us through Amazon, we will refund you or....
Check Stock

Vortech 4GX218-150L V-3 Si-Trim EFI Truck LS-Engine Swap Supercharger Kit

  • For use with 1999-2013 GM Truck Front Engine Accessory Drive (Not....
  • Tuner Kit (Fuel & Tuning Components Not....
Check Stock

AISEN Carburetor with Primer Bulb Diaphragm Gasket Repair Kit for Echo Mantis 2 Cycle Tillers SV-4B SV-4/B SV4B C1U-K54A

  • Fits Echo Engine Models: SV-4B SV-4/B SV4B Mantis Tillers.
  • Package includes 1 carburetor + 2pcs gaskets + 2pcs primer bulbs + 1pc rebuild kit.
Check Stock

Painless Performance 30118 Dual Activation, Dual Electric Fan Relay Kit with Thermostatic Switch (On 205/Off 190) for LSX

  • Dual activation cooling fan relay will turn your cooling fans on when the engine reaches the preset temperature of the thermostatic switch mounted in the engine head or when the A/C is turned on.
  • Ideal for installing air conditioning in your project car.
  • Features simple to use Posi-taps for the ignition and A/C compressor connections.
  • Kit includes: Three 40-amp relays with mounting bases & wiring, fuse holder & 70-amp fuse, two LT1/LS1 fan connectors, thermostatic switch, adapter and insulated terminals.
  • Thermostatic switch turns on at 205 degrees and off at 190 degrees.
Check Stock