Reviews Engine Rear Main Seal

Bar's Leaks Rear Main Seal Repair, 16.9 oz

  • Seals timing cover, cam seal, rear main and other hard to stop oil leaks.
  • Specifically designed to seal rear main leaks, but also works better than a conventional stop leak on all other leaks.
  • Add entire bottle of Rear Main Seal Repair to engine crankcase (where you add oil) at or between oil changes. Do not overfill. Most leaks will stop within 100 miles or 2 days of driving.
Check Stock

ATP Automotive AT-205 Re-Seal Stops Leaks 8 Ounce Bottle 2 Pack

  • Seals timing cover, cam seal, rear main and other hard to stop oil leaks.
  • Specifically designed to seal rear main leaks, but also works better than a conventional stop leak on all other leaks.
  • Add entire bottle of Rear Main Seal Repair to engine crankcase (where you add oil) at or between oil changes. Do not overfill. Most leaks will stop....
Check Stock

BlueDevil 00239 Hydraulic Stop Leak - 1 Quart

  • Permanent seal: This product is formulated to flow into damaged areas of the rear main seal to provide a permanent seal to keep your vehicle’s oil inside of the rear of the engine. Works as a permanent repair and does not need to be added when oil is changed..
  • Easy to use: BlueDevil Rear Main Sealer is designed to be easy to use, making it accessible to a wide range of drivers. Simply pour the recommended amount into the engine oil..
  • Restores while you drive: Designed to restore dried, cracked, and shrunken rubber seals to their original condition while you drive..
  • Safe to use: Does not contain petroleum distillates which can destroy seals..
  • Compatible with all types of engines: Works on gasoline or diesel engines that use synthetic or conventional oils, making it a versatile product that can be used on a wide range of vehicles..
Check Stock

NO LEAK 20401 Engine Oil Stop Leak, 16 Fl oz.

  • Stops AND prevents engine oil leaks caused by dried, shrunken, or harden seals.
Check Stock

Victor Reinz Timing Cover Seal Strip

  • The three piece kit is perfect for GM Gen III & IV Engines 4.8L 5.3L 6.0L 6.2L LS1 LS2 LS3 LS6 LS7 LS9 LQ4 LQ9 and more.
  • The special design of appearance can perfectly fit and align under various temperatures, saving your time and energy..
  • Timing and rear main cover positioning tools and seal installation tools help you check the condition of all shaft seal covers on the engine and effectively prevent seal leakage..
  • Package Include: Timing Cover Rear Main Cover (as shown in the picture).
Check Stock

Crankshaft Rear Main Seal and Wear Ring Installer Tool Replacement for Engine 4.5L 6.0L 6.4L Diesel Alt 303-770

  • Replacement for 4.5L Diesel - Low Cab Forward (2006-2009).
  • 6.0L Diesel - F650/750 Super Duty (2005-2007).
  • 6.4L Diesel - F250/350/450/550 Super Duty (2004-2010 & VT365 International).Installation instructions are not included.
  • OEM Replacement part # 303-770. ZTSE4515C ZTSE4515. Universal, used to install the Crankshaft Rear Seal Wear Ring for 4.5L, 6.0L, 6.4L Powerstroke and work in an easier way to save your time and money.
  • Material: All components made of high quality carbon steel, impact resiatant, excellent solid and durable.
  • Universal fits for installation of Crankshaft Rear Seal Wear Ring for 4.5L,6.0L,6.4L Powerstroke .This tool is needed to prevent your seal from leaking.Designed to eliminate lip flare on the wear sleeve and install the crankshaft rear seal wear ring on 4.5L, 6.0L & 6.4L powerstroke engine properly.
  • This rear main seal installer tool can help you install the crankshaft wear ring, rear seal and rear seal carrier effortlessly. The wear ring is automatically installed to the proper depth.
Check Stock

Rear Main Seal Installer Tool JDG476 JDG477 JDG478 Fits for J D 404 466 6076 7.6L 8.1L Engines, Rear Crankshaft Seal and Wear Sleeve Installer Tool

  • 【Material】For John Deere Servicegard Rear Main Seal Installer is crafted from quality carbon steel, high strength, anti-wear, rust resistance, anti-oxidation, sturdy and durable..
  • 【Function】This rear oil seal installer tool is used to simultaneously install the Teflon unitized seal and wear sleeve on the engine rear crankshaft flange..
  • 【Custom Design】The driver acts as a pilot to install rear oil seal in the housing eliminating the need for a dial indicator to measure..
  • 【Advantage】Our crankshaft rear seal installer is compatible with John Deere tractors and combines, keeping your equipment running smoothly for a long time..
  • 【Application】This JDG476 JDG477 JDG478 seal installer tool fits for JD models 3010 3020 4000 4010 4020 4320 4520 4620 4230 4430 4630 8430 4040 4240 4440 4640 4840 8440 (4050 W/466 ONLY) 4250 4450 4650 4850 8450 4055 4255 4455 4555 4755 4955 4560 4760 4960, and fits for many more AG & Industrial equipment that using the 270 404 466 6076 7.6L 8.1L engines. (Please make sure the model and part numbers match your application.).
Check Stock

Gen III LS Head Gasket Kit for GM Chevy LS1 LS6 LQ4 LQ9/4.8L 5.3L 5.7L 6.0L 1997-2007 Cylinder Engine Block Valley Cover Gasket 12589226 12612350 12558178

  • ...ell plug#12573460/(1)Rear Main Crank Seal#89060436/(1)Front Main Crank Seal#12585673/(2)Knock Sensor Grommet# 12558177/(4)Water Block Off Gaskets#12551933/(2)LS Water Pump Gasket #12630223/(1)Front Cover Gasket#12633904/(1)Rear Main Seal Gasket#12639249/(1)Oil Pan Gasket#12612350/(2)Cylinder Head Gasket#12589226/(1)Engine Block Valley Cover Gasket#12558178/(1)Exhaust Manifold Gasket#12617944/(1)Valve Cover Gasket#12637683.
Check Stock

2009-2018 Subaru WRX STi Nitride Treated Hardened Crankshaft EJ257 2.5L 12200AA430 OEM GENUINE

  • 【Compatible】The crankshaft rear main seal & wear sleeve installer & remover tool kit compatible with Cummins ISX QSX ISX15 ISX12 diesel engines. Replaces OEM 3164780 3162994. Replace multiple seals including 4965569..
  • 【Features】Designed for easy removal and correct installation of the crankshaft rear seal and wear ring/sleeve on diesel engines..
  • 【Advantage】This crankshaft rear main seal & wear sleeve installer & remover tool kit helps reduce the risk of damage to the crankshaft seal surface during disassembly. In addition, the rear seal and wear ring will be automatically installed to the appropriate depth using this special tool 3164780 to prevent damage to the rear seal and leakage..
  • 【Quality】The crankshaft rear main seal & wear sleeve installer & remover tool kit is manufactured by an ISO-certified manufacturer, made of high-quality materials, and meets or exceeds OEM requirements. 100% factory tested, and durable..
  • 【Warranty】2 years warranty for the The upper gimbal steering arm shaft kit! When you have any questions about our products, please feel free to contact us, we will provide the best service..
Check Stock

303-770 Crankshaft Rear Main Seal Installer Tool for Ford 4.5L, 6.0L & 6.4L Powerstroke, Rear Seal & Wear Ring Installer

  • APPLICATION – Fit for Ford 4.5L, 6.0L & 6.4L Powerstroke Diesel Engine, Low Cab Forward, F-Super Duty 250-550, E-Series.（Specific application reference as following）..
  • FUNCTION -- Use for installation & removal of crankshaft rear seal wear ring for your Ford. Preventing your seal from leaking..
  • SUPERIOR MATERIAL -- Constructed from high standard forged steel for strength, durability, and longevity.
  • coated with black oxide finish for resistance to rust and corrosion. Never worry wear or damage to the tool!.
  • DIRECT REPLACEMENT-- Replace ZTSE4515C ZTSE4515 303-770. This rear main seal installer tool makes this job easier!.
  • 100 SATISFACTION GUARANTEE -- We are responsible for our products and service. If you're not 100% satisfied with this Tool, simply return it for a full refund in 30 days, guarantee with 1-year warranty..
Check Stock

Speedway Motors 1955-1985 Fits Chevy Flexplate for 2-Piece Rear Main, 168 Tooth

  • Perfect for installing new engine or transmission.
  • Intended for two-piece rear main seal engines ONLY.
Check Stock

Ford Racing M-6701-B302 Rear Main Seal for 5.0L Engine

  • Direct replacement one-piece crankshaft rear main seal for 1983-2001 5.0L/302 blocks..
  • Also fits Ford Racing blocks M-6010-R302, M-6010-A50, M-6010-B50 and M-6010-BOSS302These rear main seals from Ford Racing are direct replacements designed for your Ford block..
Check Stock

DNJ RM1120 Rear Main Seal for 1987-2000 / Jeep/Cherokee, Comanche, Grand Cherokee, Wagoneer, Wrangler / 4.0L / OHV / L6 / 12V / 242cid

  • FITS: 81-00 Jeep / Cherokee, Grand Cherokee, Wrangler, Comanche, Wagoneer, J10, CJ7, Grand Wagoneer 4.0L-4.2L L6 OHV Naturally Aspirated.
  • WARRANTY TYPE: 1 year or 12,000-mile DNJ® limited warranty..
  • DNJ Engine Components is a full line provider of Domestic & Japanese engine parts for cars and trucks..
  • We carefully selected DNJ Engine Components as the sole provider. DNJ has a 30+ year track record of quality, experience, and trust. It makes sense for us to carry a brand that would help us earn customer loyalty in the long run.
Check Stock