Reviews Engine Oil Temperature Reducer

Hot Shot s Secret - HSSFR308Z FR3 Friction Reducer 8 fl oz.

  • 00% synthetic oil additive that protects engines and improves performance.
  • You can use the product in gas or diesel engines, works with synthetic or conventional oil.
  • FR3 Friction Reducer increases horsepower and fuel economy up to 5 percent.
  • Reduces engine wear up to 43 percent and oil operating temperature.
  • 8-ounce friction reducer engine additive reduces lifter and valve noise and restores lost compression.
Check Stock

Hot Shot's Secret Signature Series Oil Pack - FR3 Friction Reducer, 32 Oz - Stiction Eliminator, 64 Oz

  • Improve your vehicle's power and performance with Hot Shot's Secret Signature Series Oil Pack, designed to restore engine efficiency and performance..
  • Reduce wear by as much as 62 percent with the power of the original Stiction Eliminator..
  • Increase fuel economy and horsepower by up to 5 percent with the FR3 Friction Reducer decreasing oil operating temperatures and friction for maximized engine efficiency and power..
  • Reduce engine wear by as much as 43 percent with FR3 Friction Reducer solution, which prevents metal-to-metal contact and settles into microscopic surface grooves and irregularities for added protection..
Check Stock

957E10883 Fordson/Ford Dexta Tractor Coolant Water Temp Gauge for Dexta & super Dexta+

  • HIGH QUALITY: high-quality ABS material, strong, corrosion-resistant and durable. Long-term high water temperature will reduce the lubricating effect of the engine's lubricating oil, resulting in wear back damage to internal engine parts.
  • HIGH QUALITY: high-quality ABS material, strong, corrosion-resistant and durable....
Check Stock

COMPLETE & UNABRIDGED 1984 CORVETTE FACTORY REPAIR SHOP & SERVICE MANUAL - INCLUDES; 1984 Hatchback, '84 Convertible,

  • 【Warm Up Your Engine Quickly】In cold winters, use Silicone Heater Pad for 10-15 minutes to ensure your engine and transmission fluid circulates efficiently before starting. For those cold mornings, the device quickly heats the oil to the right temperature..
  • 【Improve Oil Flow】You will get 2 Car Engine Heater Pad. When plugged in, Engine Warmer will transfer heat to keep engine oil a thin fluid, giving you instant lubrication when you start the engine, this reduces wear and extends the life of the engine & transmission..
  • 【Thermostatic Control】Car Battery Heater Pad rated power 120 volts, 150 watts, built-in automatic thermal protector keeps the heating temperature at a constant 194°F/90°C, effectively preventing safety hazards caused by high temperature..
  • 【Built to Last】Made of wear-resistant silicone. Oil Pan Heater Pads are waterproof, oil-proof, acid-proof and low-temperature resistant. Only designed for use on automotive metal surfaces such as engine oil pan, fuel tank, reservoir, transmission, etc. Not for personal use or on plastic..
Check Stock

Jobs USA Search

  • Oil filter housing comes with a new high quality pre-installed oil filter, it allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean..
  • 【High-quality Sensors】Our sensors are oil temperature sensors, fluid temperature sensor and oil pressure sensors that meet professional specifications. Using professional ultrasonic welding technology, as well as the sensor threads have been made thread adhesive sealing treatment which helps prevent fluid leaks and overheating, meanwhile protecting the engine from possible costly damage and prolonging its life..
  • ✅【Premium Material】Oil cooler housing assembly is made in high density virgin plastic, which has been subjected to precise temperature cycle testing and vibration durability testing for very high wear resistance and corrosion resistance.
  • Fluorocarbon and HNBR sealing rings, can be used for oil and high temperature resistance..
  • 【After-sales Service】Our product includes oil cooler kit :12 silicone gaskets (6 down-intake pressurized gaskets and 6 up-intake pressurized gaskets). In ....
Check Stock

Cool Your Engines (Original Mix)

  • Oil filter housing comes with a new high quality pre-installed oil filter, it allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean..
  • 【High-quality Sensors】Our sensors are oil temperature sensors, fluid temperature sensor and oil pressure sensors that meet professional specifications. Using professional ultrasonic welding technology, as well as the sensor threads have been made thread adhesive sealing treatment which helps prevent fluid leaks and overheating, meanwhile protecting the engine from possible costly damage and prolonging its life..
  • ✅【Premium Material】Oil cooler housing assembly is made in high density virgin plastic, which has been subjected to precise temperature cycle testing and vibration durability testing for very high wear resistance and corrosion resistance.
  • Fluorocarbon and HNBR sealing rings, can be used for oil and high temperature resistance..
  • 【After-sales Service】Our product includes oil cooler kit :12 silicone gaskets (6 down-intake pressurized gaskets and 6 up-intake pressurized gaskets). In ....
Check Stock

Vehicle Maintenance Log Book: Car Repair Journal / Automotive Service Record Book / Oil Change Logbook / Auto Expense Diary / Engine Autolog / Automobile, Truck Or Motorcycle Owner Gift Notebook

  • 【Warm Up Your Engine Quickly】In cold winters, use Silicone Heater Pad for 10-15 minutes to ensure your engine and transmission fluid circulates efficiently before starting. For those cold mornings, the device quickly heats the oil to the right temperature..
  • 【Improve Oil Flow】You will get 2 Car Engine Heater Pad. When plugged in, Engine Warmer will transfer heat to keep engine oil a thin fluid, giving you instant lubrication when you start the engine, this reduces wear and extends the life of the engine & transmission..
  • 【Thermostatic Control】Car Battery Heater Pad rated power 120 volts, 150 watts, built-in automatic thermal protector keeps the heating temperature at a constant 194°F/90°C, effectively preventing safety hazards caused by high temperature..
  • 【Built to Last】Made of wear-resistant silicone. Oil Pan Heater Pads are waterproof, oil-proof, acid-proof and low-temperature resistant. Only designed for use on automotive metal surfaces such as engine oil pan, fuel tank, reservoir, transmission, etc. Not for personal use or on plastic..
Check Stock

ABN Silicone Heater Pad Car Battery Heater Pad Engine Block Heater Pad Oil Pan Heater Pad, 4x5 Inch – 120V 250 Watt

  • KEEP YOUR ENGINE WARM: On a cold winter day, use the ABN 250-Watt 4x5 Inch Silicone Rubber Heater Battery Heating Pad 10 or 15 minutes prior to start up for perfect engine oil temperature.
  • Device heats the oil quickly up to 194 degrees Fahrenheit (90 C) for those cold start mornings.
  • IMPROVE OIL FLOW: Transmits heat (to a built-in maximum temperature of 194 F / 90 C) to keep engine oil as a thin fluid, giving you instant lubrication when starting your engine.
  • Increases engine longevity and extends transmission life.
  • EASY TO INSTALL: Clean application surface, peel off paper backing to adhesively attach 4-inch x 5-inch (10.2cm x 12.7cm) pad to outside of clean oil pan or other metal surface, then plug the 5.75-foot (1.8m) 2-prong power cord into any wall outlet for instant warming.
  • Once applied, the stick on oil pan heater remains permanently installed on any metal surface (seal edges for longer adherence.
  • BUILT TO LAST: Flexible heating pad is rated at 120 Volts and 250 Watts.
  • Constructed with silicone coat covering for oil resistance, acid resistance, and added strength and longevity.
  • Power cord stays attached : not removable.
  • FOR AUTO WARMING: 250-watt car engine heater pad designed to heat fluids with any ....
Check Stock

Vintage Monster Truck Are My Jam Retro Sunset Cool Engines Long Sleeve T-Shirt

  • Oil filter housing comes with a new high quality pre-installed oil filter, it allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean..
  • 【High-quality Sensors】Our sensors are oil temperature sensors, fluid temperature sensor and oil pressure sensors that meet professional specifications. Using professional ultrasonic welding technology, as well as the sensor threads have been made thread adhesive sealing treatment which helps prevent fluid leaks and overheating, meanwhile protecting the engine from possible costly damage and prolonging its life..
  • ✅【Premium Material】Oil cooler housing assembly is made in high density virgin plastic, which has been subjected to precise temperature cycle testing and vibration durability testing for very high wear resistance and corrosion resistance.
  • Fluorocarbon and HNBR sealing rings, can be used for oil and high temperature resistance..
  • 【After-sales Service】Our product includes oil cooler kit :12 silicone gaskets (6 down-intake pressurized gaskets and 6 up-intake pressurized gaskets). In ....
Check Stock

EONLION 10 Row AN10-10AN Oil Cooler Kit Universal Engine Transmission Aluminium Alloy Black Usable To Cool Down Engine Oil Increases Engine Oil Capacity Available Comes with 2 Oil Lines

  • ADVANTAGES- Made of high quality T-6061 aluminum. It can be used to cool engine oil, transmission and rear differential..
  • FUNCTION- Keep the oil temperature low to prevent damage or even seizure of the engine..
  • HOW IT WORKS- The 10-row oil cooler is basically like a radiator to cool your oil. Install the engine oil in a reasonable location with good air, your engine oil will enter the engine oil from here, and then reflux and cool down, and ensure that the engine oil is within a certain working temperature range..
  • ADAPTATION- This is a universal oil cooler kit. The design of this oil cooler is smaller and lighter, suitable for narrow spaces and meet the needs of more lines at the same time..
  • WHY DO WE NEED AN OIL COOLER KIT-When the engine rotates at high rpm under high load, it will generate friction, and the heat generated by friction will be transferred to the oil instead of overheating. After the engine oil is decomposed, it cannot be lubricated well, thus shortening the service life of the engine..
Check Stock

Brass Barb Reducer Fittings LIONMAX 1 to 3/4 Barb Hose ID Hose Barb Splicer Mender with 4 Hose Clamps for Air/Water/Fuel 2 PCS

  • 【WITH HOSE CLAMPS】1'' to 3/4'' Hose barb reducer is suitable for connecting 1 inch ID hose to 3/4 inch ID hose. The package contains barb splicer reducer 2 PCS and 304 stainless steel hose clamp 4 PCS (size can adjust). You don't need to buy additional accessories..
  • 【-65~250°F 150PSI】Brass barb reducer fitting has strong temperature resistance and good pressure resistance. So barb hose reducer is often used for water, fuel, oil delivery..
  • 【SOLID BRASS MATERIAL】Barb splicer reducer is made of brass. Strong and durable, not easy to rust and corrode. Hose barb fitting has a long service life. NOTE: Brass barb reducer fitting is not suitable for potable water..
  • 【WIDE APPLICATION】Barb hose reducer is suitable for pipe repair. Various hoses can be connected to this 1 inch to 3/4 inch ID hose barb fitting. Meet your multiple needs..
  • 【TIGHT CONNECTION】This brass barb reducer is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed splicer reducer fitting not easy to leak during the connection process..
Check Stock

Silicone Heating Pad, 2 x 5inch Car Universal Oil Pan Heater 50W Battery Heater Pad 120V Engine Block Heater Pad with 68Inch Long Power Cord

  • Heating Technique: In the cold winter, use our 120V 50W silicone heating pad to turn on the power before starting the engine, and continue to evenly heat the metal surface to make the oil reach the perfect temperature.
  • Improve Engine Oil Flow: Continue to transfer heat to reduce the consistency of the oil, keep the engine oil as a thin liquid, help you better lubricate the engine, reduce wear, and extend the service life of the engine and gearbox.
  • High-Quality Material: Our oil pan heater is made of wear-resistant silicone, waterproof, oil-proof, and low-temperature resistant, the entire surface is heated evenly, strong adhesive makes it fixed on the metal surface. Please note: it is very hot after heating, please use a thermostat (not included) to adjust the temperature.
  • Simple Operation: Clean the metal surface, tear off the backing of the engine heating pad and stick it firmly to the outside of the oil pan or other metal surface, insert the 2-core power cord into the socket, and the heating starts immediately, after 10-15 minutes, unplug the power cord and start the vehicle to resume normal operation.
  • Adaptability: The size of the engine block heater is 2 in x 5 in, and the power cord is about 68 inches. It is only suitable for automotive parts with m....
Check Stock

Hot Shot's Secret TRIO Diesel Oil and Fuel Additive - 128 fl. oz.

  • By decreasing particulate matter and hydrocarbons in your diesel particulate filter, Diesel Extreme fuel treatment improves your fuel's combustibility and decreases DPF regeneration by up to 50 percent.
  • FR3 Friction Reducer contains 3 patented lubricants that decrease engine wear by up to 43 percent and prevent long-term damage before it starts.
  • FR3 boosts your fuel economy by up to 5 percent and improves your vehicle's performance over the long term.
Check Stock