Reviews Engine Oil Recovery

EONLION 10 Row AN10-10AN Oil Cooler Kit Universal Engine Transmission Aluminium Alloy Black Usable To Cool Down Engine Oil Increases Engine Oil Capacity Available Comes with 2 Oil Lines

  • ADVANTAGES- Made of high quality T-6061 aluminum. It can be used to cool engine oil, transmission and rear differential..
  • FUNCTION- Keep the oil temperature low to prevent damage or even seizure of the engine..
  • HOW IT WORKS- The 10-row oil cooler is basically like a radiator to cool your oil. Install the engine oil in a reasonable location with good air, your engine oil will enter the engine oil from here, and then reflux and cool down, and ensure that the engine oil is within a certain working temperature range..
  • ADAPTATION- This is a universal oil cooler kit. The design of this oil cooler is smaller and lighter, suitable for narrow spaces and meet the needs of more lines at the same time..
  • WHY DO WE NEED AN OIL COOLER KIT-When the engine rotates at high rpm under high load, it will generate friction, and the heat generated by friction will be transferred to the oil instead of overheating. After the engine oil is decomposed, it cannot be lubricated well, thus shortening the service life of the engine..
Check Stock

Mopar 82215366 Front End Cover Jeep Gladiator Wrangler W/ Diesel Engine

  • Replacement Engine Oil Filter - The engine oil filter is designed to protect and capture harmful contaminants like carbon, sand, dust, and bits of metal that circulates into your engine. It filters the oil to prolong its life and to provide long lasting engine protection..
  • Compatible Replacement for Jeep & Ram Diesel 3.0L Vehicles - 2021 Gladiator 3.0L | 2020-2021 Wrangler 3.0L | 2020-2021 1500 3.0L | It is important to have clean motor oil because dirty oil can wear the oil pump’s machined components and damage the bearing surfaces in the engine. The oil filter helps remove pollutants from your car engine’s oil that can accumulate over time..
  • Replaces Part# 68507598AA, 68498720AA commonly found on popular Gladiator, Wrangler or 1500 models including year models 20, 21. If you are experiencing acceleration problems, metallic noises under the hood or low oil pressure your oil filter might need to be replaced..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and will look, fit and work exactly like the factory part. Oil filter should be replaced every time the oil ....
Check Stock

Engine Oil Cooler Kit - Compatible with Ford Trucks - Powerstroke 6.0L V8 F250, F-350, F450, F550 Super Duty, Excursion, E350, E-450 - Replaces Part 904-228, OCK388, 3C3Z 6A642 CA - Gasket Seal Kit

  • Replacement Engine Oil Cooler With Gasket Seals & O-Rings - Is a heat-exchanger which is commonly a radiator type of cooler which cools engine oil from the engine. It removes excess heat from the oil using the engine coolant that flows around as the engine oil passes through the cooler. The engine oil cooler can be located under the intake above the engine..
  • Compatible Replacement for Ford Vehicles - 2004 - 2005 E-350 Club Wagon | 2004 - 2010 E-350 Super Duty | 2004 - 2007 E-450 Super Duty | 2003 - 2005 Excursion | 2003 - 2007 F-250 Super Duty | 2003 - 2007 F-350 Super Duty | 2003 - 2007 F-450 Super Duty | 2003 - 2007 F-550 Super Duty |..
  • Replaces Part# 3C3Z 6A642 CA, 904228, 904-228, 015339, OCK388, 3C3Z-6A642-CA, 3C3Z6A642CA - If you are noticing engine oil in your coolant system, oil or coolant leaking from the oil cooler or engine coolant mixed with your engine oil then your oil cooler might need to be looked at or replaced. This engine oil cooler kit also includes viton gasket seals needed for the proper service on your vehicle..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and it will fit and work exactly like the factory part. This part is commonly found on popular Powerstroke 6.0 V8 models....
Check Stock

JIFETOR Oil Pressure Gauge Tester Kit Engine Transmission Fluid Test Tool Set 12PCS, 500psi Automotive Mechanical Automatic Gearbox Line Pressure Meter for Car Truck Motorcycle ATV

  • ENGINE AND TRANSMISSION OIL PRESSURE TEST AND DIAGNOSTIC: This oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The oil pressure gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • EASY TO CHECK ENGINE OIL PRESSURE: Remove low oil pressure switch, attach the engine pressure tester with appropriate adapter, start engine to read the pressure on the gauge. Verify vehicle oil pressure is normal or not against manufacturer's recommended readings. Turn off the engine and remove the engine oil pressure tester, replace the low oil pressure switch, then done..
  • FITMENT TYPE: The transmission pressure gauge kit includes 12PCS selectable brass connectors (include the one on hose), very sturdy and durability. These connectors can be connected to the corresponding sizes oil pressure test service port, on most vehicles with gasoline or diesel engine, includes car, motorcycle, ATV, truck and so on..
  • PRESSURE GAUGE AND HOSE: Transmission pressure gauge adopts rubber cover pro....
Check Stock

Car Engine Heater Pad, 4 x 5 inch Car Universal Engine Heating Oil Pan Heater Pad 120V Silicone Electric Battery Heater Pad 150W Engine Block Heater Pad w/Overheat Protector 68\ Long Power Cord

  • Quickly Warm Your Engine - In the cold winter days, use silicone car engine heater pad will fast heat up your engine oil pan ensure that your engine and transmission fluid circulates efficiently before starting.
  • Heat Up Oil Flow - Self-adhesive oil pan heater pad battery heater pad engine block heater pad will improve oil flow, transmits heat to keep engine oil as a thin fluid, giving you instant lubrication when starting your engine, reduces engine wear and tear.
  • Silicone Covered & Thermostatically Controlled - Silicone coating resists oil, acid, and water, and adds strength and longevity to these oil pan, reservoir and transmission pan.
  • heat for 10 to 15 minutes that keeps the heating temperature at a constant 194 F /90°C, increases engine longevity and extends transmission life.
  • Built-In Overheat Protector - 4 x 5 inch/10.2 x 12.7cm car engine heater pad is rated at 120 volts and produces up to 150 watts, oil pan heater pads built-in automatic thermal protector, effectively preventing safety hazards caused by high temperatures.
  • Easy Set Up - Easy to install, as car engine heater pad requires little mechanical ability, before use, please wipe clean the dust on the surface to keep it dry, and peel off the paper backing from the oil pan heater pad and a....
Check Stock

Learn Numbers, Shapes and Colors at the Amusement Park with Max the Glow Train

  • Heated Engine: Help you start car quickly. In cold winter, use silicone heating pad to heat the engine and transmission before starting the car, reduce the consistency of the oil to keep the oil as a thin liquid, thus better lubricating the engine and reducing wear and tear, extending the life of the engine and transmission and starting the car quickly..
  • Replaces Block Heaters: Magnets do not work on aluminum oil pan, which is what most cars have. Oil pan heaters are suitable for both cast iron and aluminum engine oil pans.Economical and convenient solution..
  • High Quality Material: Made of high quality silicone, waterproof and oil-proof, the waterproof design of the silicone and power cord connection reduces the risk of short circuit. The hotter the upgraded silicone is the stronger the adhesion. Fast heating, then constant at 194 ℉ / 90℃, prevent the safety hazards caused by high temperature..
  • Easy to Install: Clean and dry the flat surface of the device, peel off the paper backing and apply the oil pan heater, using magnets/adhesives can extend the adhesion time (magnets and adhesives not included).
Check Stock

Replacement Engine Oil Filter - Compatible with Jeep Gladiator, Wrangler & Ram 1500 3.0L Vehicles - Replaces 68507598AA, 68498720AA - 2020, 2021 - 3 Liter Diesel Engines

  • Replacement Engine Oil Filter - The engine oil filter is designed to protect and capture harmful contaminants like carbon, sand, dust, and bits of metal that circulates into your engine. It filters the oil to prolong its life and to provide long lasting engine protection..
  • Compatible Replacement for Jeep & Ram Diesel 3.0L Vehicles - 2021 Gladiator 3.0L | 2020-2021 Wrangler 3.0L | 2020-2021 1500 3.0L | It is important to have clean motor oil because dirty oil can wear the oil pump’s machined components and damage the bearing surfaces in the engine. The oil filter helps remove pollutants from your car engine’s oil that can accumulate over time..
  • Replaces Part# 68507598AA, 68498720AA commonly found on popular Gladiator, Wrangler or 1500 models including year models 20, 21. If you are experiencing acceleration problems, metallic noises under the hood or low oil pressure your oil filter might need to be replaced..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and will look, fit and work exactly like the factory part. Oil filter should be replaced every time the oil ....
Check Stock

Synthetic Engine Oil Treatment Additive Universally Compatible Performance Enhancing Reverses Engine Wear and Increases Vehicle Life and Mileage 8 Fl Oz by SHINE ARMOR

  • Optimal Engine Performance. Our performance booster engine treatment reverses wear in bearings by building a carbon coating, providing effective gas treatment for quiet, smooth and efficient performance. A cutting-edge, nanoparticle-based solution that works great for gas and diesel engines alike. It takes the properties of your host oil to the next level while preventing rust, oxidation & reduce friction..
  • Groundbreaking Formula Gear Oil. This revolutionary engine oil additive is eco friendly, made in the USA and contains scientifically backed synthetic oil nanoparticles to boost engine performance..
  • Universally Compatible. Our Engine Performance Booster oil treatment can be used in both gas and diesel engines, and old and new cars. Shine Armor's Oil Additive is compatible with all types of motor oil & engine oil like 5w30, 0w-20, 10w30, 5w20, 15w40 & more..
  • Quality Assured. We know you will be delighted with this ground-breaking engine additive technology. Our oil additive treatment is formulated using the latest technology and backwards-compatible with all vehicles..
Check Stock

Genuine OEM Toyota Oil Filter 90915-YZZD3 (4PK) with DIINGO Plug Oil Drain Gasket 90430-12031 (4PK) Fit for 4Runner FJ Cruiser Land Cruiser Sequoia Tacoma Tundra

  • The Pressure Release Valve: Oil filters clog when exposed to excess contaminants. This clogging can restrict the flow of oil to the engine causing severe damage. The Pressure Relief Valve of a Genuine Toyota Oil Filter opens only when the filter is clogged allowing oil to flow to the engine. The valve on some non-genuine Toyota oil filters open at lower pressures, allowing unfiltered oil to the engine even when the filter is not clogged..
  • The Filter Element: The Toyota approved element effectively filters contaminants while meeting all Toyota Parts specifications for oil flow. By comparison, a lesser quality element may clog over time, which could lead to engine seizure or other potential engine problems. Some non-genuine Toyota oil filters do not meet Toyota’s stringent specifications..
  • The Anti-Drainback Valve: Genuine Toyota Oil Filters feature an Anti-Drainback Valve that prevents oil from draining out of the engine and into the oil pan. This helps protect your engine from increased wear during cold-starts..
Check Stock

Outboard Motor, 2 Stroke 12 hp 246cc Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System

  • Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm（17.32inches） (inclusive) transom height.
  • two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
  • 2-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
  • Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
  • The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adop....
Check Stock

Ecodiesel Engine Oil Filter 68507598AA 68498720AA Compatible with Jeep 2021 Wrangler JL,2021 Gladiator,2020-2021 Ram 1500 DT

  • 【Replaces Part】Replaces Part #: 68507598AA, 68498720AA Oil Filter and Oil Filter Housing Cap Assembly..While this is not genuine OEM part, it is a....
  • 【Compatible with】Engine Oil Filter Compatible with Jeep EcoDiesel 3.0L V6 Vehicles2020-2021 Wrangler JL,2021 Gladiator.Ram EcoDiesel 3.0L V6....
  • 【Replacement Engine Oil Filter 】It is usually to change the engine oil filter easily ,because it is on the top of the engine near the front or on....
  • 【OEM Fit, Quality, Finish】Engine oil filter is manufactured in full accordance with the standards of OE parts, and 100% factory inspection is....
  • 【Lifetime Warranty】The engine oil filter assembly from KASSEN comes complete with a lifetime warranty.If there ia any problem on your Jeep....
Check Stock

Outboard Motor, 6hp Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System (2 Stroke 6 hp)

  • Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm（17.32inches） (inclusive) transom height.
  • Hangkai two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
  • Hangkai two-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
  • Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
  • The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adopts an international standard air intake system and compression ratio, which can effectively improve combustion efficiency and thus reduce fuel consumption. It....
Check Stock

Arnold 2-Cycle Engine Oil - 1-Mix 16 oz.

  • For use with any 2-cycle engine with a ratio of 32:1, 40:1 and 50:1.
  • Provides superior lubrication for 2-cycle air-cooled gasoline engines..
  • Convenient Tip "n" Measure plastic bottle, with fuel stabilizer: holds 16 oz..
Check Stock