Reviews Engine Oil Pump Inlet Screen

Upgrade 80W 12V Oil Change Pump Extractor, Changing Diesel Fluid Scavenge Suction Oil Transfer Pump Kit for Car, Jet Ski, Truck, RV, Camper, ATV, Boat, Motorbike, Riding Mowe

  • ...de] The maximum power is upgraded from the previous 60W to 80W, and the overload protection is upgraded to increase safety protection for your operation.In addition, you will get 1 additional outlet hose, 1 inlet hose, 4 hoses in total, but our price remains the same..
  • [Measured extraction speed]Under the premise of engine oil heating, the speed can reach 0.3gal/min, while the diesel extraction speed is 0.6-1gal/min, Voltage: 12V, maximum current: 7A, maximum power: 80W. According to the arrow Install the hose, Inlet Hose is thin, Outlet Hose is thick.
  • [Safe Operation]: To pump oil properly, before use, please heat the car engine to 104°F-140 °F (40℃-60℃) for about 15 minutes to prevent the oil from solidifying and blocking. Tips: it is NOT suitable for gasoline. Do not use this fluid oil change pump to extract water, gearbox oil, or easily flammable liquids (fuel, petrol, etc)..
  • [Application] This oil transfer pump can change engine oil and diesel for cars, boats, motorbikes, trucks, RV and ATV, and other 12V vehicles..
  • [What you get]: Package included: 1 x Pump.
  • 2 x Battery Clamps. Service warranty: 12month warranty and friendly customer service. Please contact us via email if has any question..
Check Stock

Vevitts 80w Oil Change Extractor Pump 12V Oil Extractor Pump for Changing Diesel Fluid Scavenge Suction Oil Transfer Pump Kits for Jet Ski, Truck, RV, ATV, Boat (Red)

  • 【Instructions for use】1. Please pay attention to the direction of the inlet and outlet, the positive and negative poles and the locking hose lock before use.
  • 2. Please start the vehicle and heat the engine oil to 40-60 degrees for about 5 minutes, otherwise, the oil change pump may have low suction or get stuck. 3. CAN NOT be used to extract water, gear oil (too viscous) or flammable liquid (fuel, gasoline,kerosene,etc.)..
  • 【Complete Diesel Change Pump Kit】The oil transfer pump is mini but powerful. With 4.6ft Outlet tube & 4ft Inlet tube, the 8.2ft long battery clamps makes the extractor pump kit possible for being used at large range. The 2 hoops are used to tighten the tubes to avoid oil spilling..
  • 【12V 80w Oil Extractor Pump】Oil change pump, a great helper for quick and clean oil changing and transfer, all parameter is verified by multiple test. Diesel Flow Rate: 3.5L/min, Engine Oil Flow Rate(40-60℃): 1L/min, Inlet Tube Length: 1.2m/47.2in, Outlet Tube Length: 1.4m/55.1in, Voltage: 12V, Maximum current: 5A..
  • 【Premium Quality】We use pure copper for motors.Good conductivity, corrosion resistance and rust resistance, effectively avoid leakage or short circuit. Instead of manual operation, it can help you change oil quickly and cleanly....
Check Stock

BOYISEN Oil Change Pump Extractor 12v 60W Oil Extractor Pump Diesel Fluid Transfer Scavenge Suction Pump Oil Quick Changer for Car, Boat, Marine, Motorbike, Truck, RV, ATV(Yellow)

  • 【Efficient Electric Pump】Oil change pump, a great helper for quick and clean oil changing and transfer, all parameter is verified by multiple test. Diesel Flow Rate: 1.5L/min, Engine Oil Flow Rate(40-60℃): 0.3L/min, Inlet Tube Length: 1.2m/47.2in, Outlet Tube Length: 1.4m/55.1in, Voltage: 12V, maximum current: 5A, maximum power: 60W.
  • 【NOTES】A, This oil transfer pump CAN NOT transfer WATER, GASOLINE, PETROL, FUEL or FLAMMABLE LIQUID. B, Please DO NOT misplace the direction of import and export, positive and negative poles and secure the hose clamps. C, Heat up your engine oil to 104°F-140°F before pumping D, We tested oil pump before shipping, there might be little oil stain in the pump, kindly understand. E, To make it last longer, it’s recommended to keep a little oil inside when the extractor pump is not in use..
  • 【Premium Quality】The quality of oil change pump extractor varies widely. We are using pure copper for the motor and alligator. Good electrical conductivity, corrosion resistance and rust free, effectively avoid leakage or short circuit. Overheat protection will cut off the power supply automatically for safety.
  • 【What You Get】The diesel change pump come with 2 outlet hose, 2 inlet hose, 4 hose locks and 2 battery clips. A....
Check Stock

MAHLE Original 41940.030 Ford 6.0L Power Stroke & Navistar VT275/365 & MaxxForce 5 0.030\ Piston Ring Set, 8 Pack

  • THIS KIT INCLUDES: Piston Set, Piston Ring Set, Main Bearings Set, Rod Bearings Set, Head Gasket Set, Lower Gasket Set, Freeze Plug Set (Brass), Cam Bearings, Timing Chain Kit, Oil Pump.
  • FITS: 87-90 Cadillac, Chevrolet, Pontiac / Brougham, Camaro, Caprice, Firebird 5.7L V8 OHV Naturally Aspirated.
  • FITMENT NOTES: w/ Oil Pump & Timing Belt Or Timing Kit If Applicable, Dish Pistons, Master Kit, w/ 3/4 Inlet Pump, w/ 3/4 Inlet, w/o IG3173, w/ Oil Pump & Timing Belt Or Timing Kit If Applica.
  • You are assured to receive a worldwide proven Master Engine Rebuild Kit quality part with OE quality fit and performance..
  • IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.
Check Stock

BOYISEN Oil Change Pump Extractor 12v 80W Oil Extractor Pump Diesel Fluid Transfer Scavenge Suction Pump Oil Quick Changer for Car, Boat, Marine, Motorbike, Truck, RV, ATV(Orange)

  • 【Efficient Electric Pump】Oil change pump, a great helper for quick and clean oil changing and transfer, all parameter is verified by multiple test. Diesel Flow Rate: 1.5L/min, Engine Oil Flow Rate(40-60℃): 0.3L/min, Inlet Tube Length: 1.2m/47.2in, Outlet Tube Length: 1.4m/55.1in, Voltage: 12V, maximum current: 7A, maximum power: 80W.
  • 【NOTES】A, This oil transfer pump CAN NOT transfer WATER, GASOLINE, PETROL, FUEL or FLAMMABLE LIQUID. B, Please DO NOT misplace the direction of import and export, positive and negative poles and secure the hose clamps. C, Heat up your engine oil to 104°F-140°F before pumping. D, We tested oil pump before shipping, there might be little oil stain in the pump, kindly understand. E, To make it last longer, it’s recommended to keep a little oil inside when the extractor pump is not in use.
  • 【Premium Quality】The quality of oil change pump extractor varies widely. We are using pure copper for the motor and alligator. Good electrical conductivity, corrosion resistance and rust free, effectively avoid leakage or short circuit.
  • 【What You Get】The diesel change pump come with 2 outlet hose, 2 inlet hose, 4 hose locks and 2 battery clips. The hose clip enable to thoroughly seal the connection and prevent leaking. A....
Check Stock

Upgraded 80W Oil Change Pump Extractor SICOTOOL 12v Diesel Fluid Scavenge Suction Oil Transfer Pump with Hose for Car Boat Motorbike Truck ATV and Other Vehicles.

  • 【Portable 80w Oil Extractor Pump】: Lightweight and portable oil pumps bring a lot of convenience for you. Ideal oil pump for oil change.12V 80W....
  • 【Built in Over Current Protection】：Our this upgraded pump built-in overcurrent protection mode ,which can help to maintain the stable operation....
  • 【Easy to use】: Install the oil extractor inlet and outlet hose, tighten the hose clamps, connect the power clamps to the vehicles battery and....
  • 【Safe Operation】:To pump oil properly, before use,please heat up car engine to 104°F-140 °F (40℃-60℃) about 15 minutes in order to prevent....
  • 【What you get】:Package included: 1 x Pump.
  • 2 x Battery Clamps. Service warranty: 12month....
Check Stock

YaeTek Oil Change Pump Extractor, 12v 60w Marine Oil Change Pump Electric Oil Pump, Diesel/Engine Oil Scavenge Pump for Oil Changes in Car, Boat, Truck, Motorcycle

  • ...p has 1 outlet hose, 1 inlet hose, 2 hose locks and 2 battery clips. Please pay attention to the direction of import and export, positive and negative poles and lock hose lock before use. The suction power of the micro suction pump is limited. Please do not connect other extension tubes..
  • 【Do not pump】Except for engine oil and diesel,do not pump hot oil or when the car engine is running.Car engine must cool complately.Do not pump gas,paraffim,petrol or other inflammable liquids.Do not pump water and it is not suitable for storage or transportation of fuel or other liquids.Do not pump different oils into the same tank. Only pump warm motor-oil(40℃-50℃) do not pump off motor-oil, as long as the motor is running..
Check Stock

OKOOLCAMP Oil Change Pump Extractor -12V 60W Marine Oil Extractor Pump for Boat Truck RV ATV Diesel Scavenge Suction Pump 60W

  • Quick and Efficient- Oil Extractor Pump, a good helper for quick and clean oil changing. Diesel Flow Rate: 1.5L/min, Engine Oil Flow Rate(40-60℃):....
  • Premium Quality-Pure copper motor and conductive clips, with good electrical conductivity, corrosion resistance and rust resistance. Fully enclosed....
  • Easy to Use-Install the oil transfer pump inlet and outlet hoses, tighten the hose clamps, connect the power clamps to the vehicle battery and turn on....
  • Operation Tips-Except ENGINE OIL/DIESEL/BIODIESEL, this oil extractor CAN NOT extract WATER, GASOLINE, PETROL, FUEL or FLAMMABLE LIQUID. Before use,....
  • Widely application-This professional oil suction pump is lightweight, portable and easy to operate, it provides quick and clean oil changes, saving....
Check Stock

Upgrade Oil Change Pump Extractor, 12V 60W Motor Oil Diesel Fluid Transfer Pump Quick Oil Extractor Pump Scavenge Suction for Car Boat Motorbike Tractor Truck RV ATV

  • HIGH EFFICIENT: This oil transfer pump is an ideal equipment for quick easy and clean safety oil-changes. Flow Rate: 3L/min flow rate for engine oil, 4L/min for diesel. Voltage: 12V, maximum current: 5A, maximum power: 60W..
  • APPLICATION: This oil pump can change engine oil and diesel for cars, tractor, boat, motorbike, truck, RV and ATV and other 12V vehicles..
  • EASY INSTALLATION: You just need to place the inlet/outlet hoses at the appropriate positions, tighten the hose clamps, connect the power clamps anode and cathode to the car battery properly and press the button. Oil will be extracted by itself..
  • NOTE: To pump oil properly, please start the vehicle to heat up the oil (to 40~60 degrees)about 15 minutes. Otherwise, the oil change pump may have low suction or jammed..
  • WARNING: This oil pump is not use to extract water, gearbox-oil(too viscous) or flammable liquids (fuel, petrol etc)..
Check Stock

The ROP Shop | 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500

  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube (come installed).
  • This pump is for vertical gas engine driven units. In some instances, the pump may need to be removed to change engine oil. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4.5-7 HP. The pump has a hole in the leg for draining the engine oil. The pump includes a built-in pressure control valve, downstream chemical injection system and thermal relief valve.
  • This has the outlet facing the front. Some specific pressure washers may require longer bolts and spacers to mount the pump to your engine. These bolts and spacers are NOT included, but may be purchased at your local hardware store. Common bolt sizes: Two - 5/16" 18 x 2 1/2", One - 5/16" 18 x 3 1/2".
Check Stock

PLUMIA 12V 100W Oil Change Pump Extractor, Upgraded Oil/Diesel Fluid Pump Extractor Scavenge Suction Transfer Pump, Marine Electric Oil Pump, For Boat, Car, Motorcycle, ATV, RV, Truck, Motorbike

  • ...l pumps are needed by everyone, simple operation does not need to spend too much time to practice, widely used in motorcycles, Car, scooters, Boat, quad bikes, trucks, Ship, forklifts, Marine, Power generation machinery, tractors, lawn mowers and various machinery to change the oil..
  • 【SAFE OPERATION】- Except for engine oil and diesel, the oil pump must not draw any flammable liquid or water to avoid accidents. Before use, be sure to heat the car engine to 104 ° F-140 ° F, Avoid clogging the oil pump due to oil solidification..
  • 【ENGINE OIL CHANGE MADE EASY】 - DC 12V 100W has enough power, you only need to clamp the conductive clip on the motor and open the switch to start it, so that you can complete the oil pumping work smoothly and effectively, replacing the traditional oil change method and reduce tedious workload (diesel flow: 1.7L / m, oil flow 0.35L / m)..
  • 【ACCESSORIES & PRECAUTIONS】- The oil pump has 2*outlet hose, 2*inlet hose, 4*hose locks,1*screwdriver, 1*Oil-proof gloves, 2*battery clips, 1*user's manual. Please pay attention to the direction of import and export, positive and negative poles and lock hose lock before use. The suction power of the micro suction pump is limited. Please do not connect other extension tubes..
Check Stock

Lotyes Quick Oil Change Pump, DC 12V 60W Oil Diesel Fluid Pump Extractor Transfer Pump & Tubes Kit for Car, Boat, Motorbike, Truck, RV, ATV and Other Vehicles

  • ...s needed, the hoses and hose clamps in the package can prevent leakage during the extraction process..
  • Easy installation: Install the oil extractor inlet and outlet hose, tighten the hose clamps, connect the power clamps to the vehicles battery and switch the button on..
  • Versatility: This oil transfer pump can change engine oil and diesel for cars, boat, motorbike, truck, RV and ATV and Other Vehicles. WARNING: THIS PRODUCT CAN NOT USE TO EXTRACT WATER, GEARBOX OIL OR FLAMMABLE LIQUIDS(SUCH AS FUEL,PETROL,GASOLINE,ETC)..
  • What You Get: Lotyes oil extractor pump, outlet hose, inlet hose, hose clamps, battery clamps, user guide. We are certain that you will love the design and high quality of the product. Because you are our number 1 priority, we are offering premium customer support and money-back service for a risk-free purchase..
Check Stock

YSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Differential Transfer Case Gear Gearbox Power Steering Coolant with Pump Assembly Tank

  • YSTOOL fluid extractor and dispenser tool kit includes 3PCS 1M dipstick tubes, can insert into engine dipstick tube to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess. Also can insert into any insertable pipe or tank to change non-corrosive and low-consistency liquids (such as differential fluid, transfer case fluid, gear oil, power steering fluid, coolant, water) in vehicle, jet ski, lawn mower or other small engine.
  • This ATF engine oil refill tool set provides 15PCS ATF adapters to fit a variety of vehicle models, add oil from fill plug or help to push transmission fluid into the engine through the drain plug on the transmission pan. All the 15PCS metal adapters are marked with NO. and well packed in a case, compatible with Ford, BMW, Nissan, Honda, Audi, VW DSG, VW CVT, Skoda, Porsche, Benz, Mini Cooper, Kia, Toyota, Hyundai, Infiniti, VOLVO and Lexus. You can find appropriate models by applicable manual.
  • YSTOOL pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. Absorb, transport and distribute liquids under safe and clean conditions. The consistent conversion of the 2-way control valves (blue screw valve and air inle....
Check Stock