Reviews Engine Oil Filling Machine

Outboard Motor, 6hp Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System (2 Stroke 6 hp)

  • Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm（17.32inches） (inclusive) transom height.
  • Hangkai two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
  • Hangkai two-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
  • Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
  • The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adopts an international standard air intake system and compression ratio, which can effectively improve combustion efficiency and thus reduce fuel consumption. It....
Check Stock

BJTDLLX 2 Stroke 12 HP Outboard Motor 169CC Heavy Duty Fishing Boat Engine Marine Engine with CDI Ignition System Water Cooling System

  • 【2-stroke 12HP Outboard Engine】Displacement: 169CC.
  • Control System: Tiller control Starting System: Manual start..
  • 【Details】Control System: #93 gasoline.
  • Recommended Propeller range: 3 -9"1/4''x8".
  • Recommended Lubricant: 2 Stroke Lubricating oil.
  • 【Advantages】water cooling technology improves the reliability of the whole machine.
  • light weight, easy to carry, unique appearance, large fuel tank capacity. Standard fuel tank capacity: 24L..
  • 【Reminder】The oil must be two-stroke special oil. The two oils must be mixed evenly.
  • after use, the fuel in the carburetor must be completely discharged. Mixing ratio: fuel: oil=50:1..
  • 【Gear Oil Filling Method】There is a screw on the gear box, unscrew the screw to add gear oil. Each outboard engine is filled with gear oil before leaving the factory, so it does not need to be refilled for the first time. After that, add it according to personal use and check it every ten hours..
Check Stock

Engine Oil, Fluids, Gasoline, Liquids, Kerosene Funnel with Flexible Spout Extension

  • Chemical-resistant polyethylene construction. The wide neck and wide spout allow for rapid filling of fluids without spilling.
  • Use for engine oil, gasoline, kerosene, engine fluids, etc..
  • Wide Neck and Wide Spout for Rapid Filling.
  • 7-1/2 in. funnel with removable 8 in. flexible extension, 40 fl. oz. capacity.
  • The flexible spout is removable and makes it easy to get in hard to reach areas. The flexible spout is also corrosion resistant.
Check Stock

Hanchen Liquid Filling Machine Automatic Bottle Filler 1-135 Fl Oz Digital Liquid Filler Cosmetic Oil Filling Machine for MCT Oil, Milk, Water, Juice, Essential Oil with 2 Heads Diaphragm Pump

  • [TWO INDEPENDENT CHANNELS] Two filling channels on this double head liquid filling machine are independent and complete. Therefore, liquid in two tubings won’t influence each other, it can be used for filling two kinds of liquid at the same time, DOUBLE your work efficiency, and filling two different volumes at the same time..
  • [HIGH EFFICIENCY 135 Fl Oz/Min PUMP] With a high filling speed of 135 oz./min, the diaphragm pumps installed on this bottle filling machine can fill a 10 oz. bottle within 5s! And the accuracy is up to 1%. It can greatly improve the work efficiency of customers who have the need of small batch production..
  • [WIDE APPLICATION] This liquid filling machine is an ideal filling equipment for small batch production in cosmetics, beverage, daily chemical, and other industries. It is suitable for thin (water-like or oil-like), particle-free, non-corrosive liquid, such as cosmetic oil, beer, beverage, essential oil, MCT oil, 45% alcohol, water, glass detergent, etc..
  • [SUS304 ANTI-DRIP DISCHARGE NOZZLE] Unlike plastic discharge nozzle used by other vendors, we adopts SUS304 material to make a long hollow discharge nozzle. 4mm and 6mm nozzles are included in the package, for bottles/pouches with different openings. Equipped with an check va....
Check Stock

HUYOSEN 62CC 2-Cycle Gas Powered Chainsaw, 20-Inch Chainsaw, Cordless Handheld Gasoline Power Chain Saws for Cutting Trees, Wood, Garden and Farm(HN-C6220E)

  • ... with fast stop chain brake, safer to use. Chain saw is provided with safety switch, to prevent accidental start to ensure user safety. Comfortable handle design, anti-skid shock absorption, long-term use is not easy to fatigue, so that the chain saw balance, maneuverable and comfortable to operate..
  • ◀【Automatic Filling Oil:】The automatic oil supply system can automatically fill bar and chain oil in the process of machine operation, reduce the wear of chain and guide bar, and increase service life.(Pay Attention to: after the machine is used, some oil will remain on the chain and flow back to the bottom of the clutch, and then drop oil. This is a common phenomenon with all kinds of chain saws, and there is no defect)..
  • ◀【Air Filter & Chain:】This chainsaw is fitted with a filtration system to ensure longer air filter life and reduce fuel consumption. HUYOSNE Professional gas chain saw, equipped with high quality chain and high hardness bar tough and wear-resistant, sharp and smooth, not easy to jam the chain, fast cutting and longer service life..
  • ◀【Superior Quality and Professional Service:】HUYOSEN Handheld Cordless Petrol Chainsaws has the advantages of simple to use,reliable and rugged. HUYOSEN Gasoline Powered Chain Saws support our....
Check Stock

BJTDLLX 2 Stroke 18HP Outboard Motor, 246CC Heavy Duty Fishing Boat Engine Marine Engine with CDI Ignition System Water Cooling System Boat Motor, Tiller Control Shaft 40CM/16inch, -Short Shaft

  • 【Reminder】The oil must be two-stroke special oil. The two oils must be mixed evenly.
  • after use, the fuel in the carburetor must be completely discharged. Mixing ratio: fuel: oil=50:1..
  • 【Gear Oil Filling Method】There is a screw on the gear box, unscrew the screw to add gear oil. Each outboard engine is filled with gear oil before leaving the factory, so it does not need to be refilled for the first time. After that, add it according to personal use and check it every ten hours..
Check Stock

Engine Oil Pump

  • Melling has added this oil pump that address oiling issues frequently found in Ford 4-valve engines. The M360HV high volume oil pump provides 20% additional oil flow to assist in increasing the engines oil pressure by filling the additional clearances created by wear. As a result the pumps exceed original equipment manufacturers specifications to meet the demanding lubrication needs of those engines..
  • The pump has been designed by Melling engineering as drop-in replacement to the original equipment oil pump. No modifications to the engine, pickup tube assembly or other components are required. All the features that make our stock replacement M360 oil pumps perform so well have been utilized in the new high volume pumps this includes the coated cast iron cover plates..
  • In comparison the M360HV is a 20% higher volume version of the M360 stock replacement oil pump. In addition, the M360HV pumps have a 20 psi higher pressure relief setting/.
  • Every pump is performance tested after it is machined, cleaned, and assembled at our Jackson, MI facility. Melling is global supplier of engine parts and is ISO/TS 16949 and ISO 14001 certified..
Check Stock

Penray 7501-4PK Concentrated Motor Flush - 1-Gallon Jug, Case of 4

  • Removes Deposits and Sludge Formed in Internal Combustion Engines.
  • Frees Valves, Lifters and Rings - Allowing Engine Oil to Circulate Freely.
  • Use Every 2-3 Oil Changes for Maximum Benefit.
Check Stock

EWK Engine Oil Funnel for Toyota, Lexus, Scion, Audi, VW, BMW, Mercedes, and VAG

  • 【 Wide Applications 】 For Toyota, Lexus, and Scion vehicles that use the half turn style oil filler caps. The provided adapter is design for BMW, Mercedes, VAG, Audi, VW and many others..
  • 【 Easy to Use 】 The neck of the funnel is wide enough for easy and fast oil pouring. You don’t even really have to aim to prevent the mess. The clear window allows you to monitor the oil flowing down to the engine safely during oil change..
  • 【 Time Saver 】 No need to hold the oil funnel even if your oil neck has a baffle. You can simply leave the whole oil bottle in the funnel to completely drain while retrieving and opening the next one..
  • 【 100% No Spill 】 The funnel seals to the engine oil fill port with a rubber gasket and the upper and lower portion of the funnel threaded together and sealed by an O-ring to make sure zero leaks during fast oil filling..
  • 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If there is any problem or concern with our products, please contact us for assistance..
Check Stock

Oil Fluid Extractor Pump Suction Gun Transparent Body Changer Vacuum 200cc Chamber Capacity Manual Water Suction Convenient Tool No Leaks No Overfills Hand Gear Transmission With Cartoon soft adhesive

  • 【OIL TRANSFER PUMP 】The electronic oil meter gun with rigid tube and manual tip or flexible hose and semi-auto tip, with the appropriate connection to establish a controlled flow through the meter. Used for filling fluid such as gear oil, engine oil, antifreeze, it is a great oil filling equipment for factories, gas stations, etc..
  • 【SPECIFICATIONS 】5-digit liquid crystal display for both volume each time and total.
Check Stock

Multifunctional A03 Manual Paste Liquid Filling Machine, Wine Bottle Filler 5-50ml, Stainless Steel lip gloss base Filling Machine for liquid cosmetic,Cream, Shampoo, Cosmetic, Honey

  • ①【Filling Capacity】5-50ml (liquid，paste or other liquid substance). Our A03 filling machine named lip gloss dispenser machine, cream filling machine, lotion filling machine, oil dispenser machine, wine bottle filler. Our A03 filling machine does not require electricity and gas, which is suitable for laboratory and small batch production..
  • ②【Corrosion resistant】The machine is suitable for acidic liquids, good wear resistance and high temperature resistance, and can be filled with paste liquids up to 200°C..
  • ③【Update filling machine】High-quality steel cylinder, water separator, stainless steel filling nozzle and anti-drip design can ensure accurate filling and product purity..
  • ④【Easy to clean】This machine is made of high-quality stainless steel, which runs stably and has a long service life. And the hopper is easier to disassemble and clean..
  • ⑤【Application】The manual filling machine is mainly used for the filling of liquid paste in the pharmaceutical, daily chemical, food processing and other industries. It can also be used for quantitative filling of sealed hoses. It is an ideal paste liquid filling equipment..
Check Stock

HUYOSEN 62CC 2-Cycle Gas Powered Chainsaw 20-Inch Chainsaw Cordless Handheld Gasoline Power Chain Saws for Cutting Trees Wood Garden and Farm HN-C6220E

  • High Outut Engine: HUYOSEN 62CC 4.1HP gas powered chainsaw with 20-inch bar and chain for cutting wood, trees and ice cube. Low-kickback function and....
  • Air Filter & Chain: HUYOSEN chainsaw is fitted with a filtration system to ensure longer air filter life and reduce fuel consumption.Tough and....
  • Automatic Filling Oil: The automatic oil supply system can automatically fill bar and chain oil in the process of machine operation, reduce the wear....
  • Comfortable and Safety Design: The ergonomic design paired with the cushion wrap handle, non-slip and shock-absorbing, can work long hours without....
  • The Warranty Service: We provide the 12-month warranty for the gas chainsaw, during the guarantee period, you can contact us via e-mail to solve your....
Check Stock

4HP Outboard Motor Boat Engine, 4 Stroke Heavy Duty Outboard Motor Fishing Boat Engine with Water Cooling System (4-Stroke 4HP)

  • ...marched with inflatable boats, rubber boats or fishing boats. ( Tips:The running-in period is about 10 hours or one month. Do not drive at high throttle during the running-in period.
  • Change the engine oil and gear oil after the running-in period, and the second change time is about 100 hours or six months later.
  • The machine must be erected in a reliable place when not in use.).
Check Stock