Reviews Engine Oil Change Pan

Lisle 38780 22' Square No-Splatter Pad

  • 22” Square Pad Protects Floors & Work Area from Messy Oil Splatter..
  • Insert 22" square pad in transmission drain funnels or larger oil drain pans, before oil change to eliminate oil splatter..
  • Porous material allows fluid to quickly pass through into funnel or pan..
  • Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents..
  • Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents.Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents..
  • Important: Not for coolants or fluids that will be recycled in the vehicle. Material fibers may contaminate the fluid..
Check Stock

Zerostart 3400072 Silicone Pad Heater Engine Oil, Transmission Fluid, Reservoir and Hydraulic Fluid Heater, 2¼\ x 4\ | 120 Volts | 125 Watts

  • Quickly Warm Your Engine - In the cold winter days, use silicone car engine heater pad will fast heat up your engine oil pan ensure that your engine and transmission fluid circulates efficiently before starting.
  • Heat Up Oil Flow - Self-adhesive oil pan heater pad battery heater pad engine block heater pad will improve oil flow, transmits heat to keep engine oil as a thin fluid, giving you instant lubrication when starting your engine, reduces engine wear and tear.
  • Silicone Covered & Thermostatically Controlled - Silicone coating resists oil, acid, and water, and adds strength and longevity to these oil pan, reservoir and transmission pan.
  • heat for 10 to 15 minutes that keeps the heating temperature at a constant 194 F /90°C, increases engine longevity and extends transmission life.
  • Built-In Overheat Protector - 4 x 5 inch/10.2 x 12.7cm car engine heater pad is rated at 120 volts and produces up to 150 watts, oil pan heater pads built-in automatic thermal protector, effectively preventing safety hazards caused by high temperatures.
  • Easy Set Up - Easy to install, as car engine heater pad requires little mechanical ability, before use, please wipe clean the dust on the surface to keep it dry, and peel off the paper backing from the oil pan heater pad and a....
Check Stock

Car Engine Heater Pad, 4 x 5 inch Car Universal Engine Heating Oil Pan Heater Pad 120V Silicone Electric Battery Heater Pad 150W Engine Block Heater Pad w/Overheat Protector 68\ Long Power Cord

  • Quickly Warm Your Engine - In the cold winter days, use silicone car engine heater pad will fast heat up your engine oil pan ensure that your engine and transmission fluid circulates efficiently before starting.
  • Heat Up Oil Flow - Self-adhesive oil pan heater pad battery heater pad engine block heater pad will improve oil flow, transmits heat to keep engine oil as a thin fluid, giving you instant lubrication when starting your engine, reduces engine wear and tear.
  • Silicone Covered & Thermostatically Controlled - Silicone coating resists oil, acid, and water, and adds strength and longevity to these oil pan, reservoir and transmission pan.
  • heat for 10 to 15 minutes that keeps the heating temperature at a constant 194 F /90°C, increases engine longevity and extends transmission life.
  • Built-In Overheat Protector - 4 x 5 inch/10.2 x 12.7cm car engine heater pad is rated at 120 volts and produces up to 150 watts, oil pan heater pads built-in automatic thermal protector, effectively preventing safety hazards caused by high temperatures.
  • Easy Set Up - Easy to install, as car engine heater pad requires little mechanical ability, before use, please wipe clean the dust on the surface to keep it dry, and peel off the paper backing from the oil pan heater pad and a....
Check Stock

FOUR UNCLES Oil Changer Vacuum Fluid Extractor Pneumatic/Manual 6.5 Liter with Pump Tank Remover and Brake Bleeding Hose Convenient Oil Change & Fluid Change Tool No Leaks No Overfills

  • 【2 WAY USAGE】Pneumatic and manual mode to fit any condition. The pneumatic mode provides higher speed while manual mode requires no other equipment to work with..
  • 【SPEEDY EXTRACTION】Fast extraction speed of 1.8L /min. The oil change pump extracts engine oil in a 4 cylinder car within 5 minutes at pneumatic mode..
  • 【NO OIL LEFT】 Vacuum Fluid Extractor comes with 5 kinds of tubes with different diameter go into the bottom of oil pan. The fluid extractor can be used to remove fluids from engine oil to brake fluids. It has a 6.5L reservoir, 3.28 feet flex hose and 3 extra dipstick hoses to reach the very bottom of the reservoir and suck up every drop of oil..
  • 【Easy to Use】With FOUR UNCLES oil extractor, you don’t have to get under the car anymore to do fluid changing and there is no mess to clean afterward. Just simply open the hook and insert tube to change engine oil..
  • 【WORK FREELY】Not limited to places, change oil anytime, anywhere. Perfect for working on a car in the garage, also suitable for using outdoors on boats, truck, or lawn mowers..
Check Stock

Aocoom-QingCang 6.5 Liter Oil Changer Vacuum Transmission Fluid Extractor Pneumatic/Manual Fluid Evacuator with Pump Tank Remover and Brake Bleeding Hose Engine Oil Change & Fluid Change Tool

  • 【2 USAGES】Pneumatic and manual mode to fit any condition. The pneumatic mode provides higher speed while manual mode requires no other equipment to work with..
  • 【SPEEDY EXTRACTION】Fast extraction speed of 1.8L /min. The oil change pump extracts engine oil in a 4 cylinder car within 5 minutes at pneumatic mode..
  • 【NO OIL LEFT】Vacuum Fluid Extractor comes with 4 kinds of tubes with different diameter go into the bottom of oil pan. The fluid extractor can be used to remove fluids from engine oil to brake fluids. It has a 6.5L reservoir, 1*3.5 ft flexible hose and 3 * 3.39ft extra dipstick hoses to reach the very bottom of the reservoir and suck up every drop of oil..
  • 【EASY to USE】With oil extractor, you don’t have to get under the car anymore to do fluid changing and there is no mess to clean afterward. Just simply open the hook and insert tube to change engine oil..
  • 【WORK FREELY】Not limited to places, change oil at any time. Perfect for working on a car in the garage, also suitable for using outdoors on boats, truck, or lawn mowers..
Check Stock

ATPEAM Oil Changer Vacuum Fluid Extractor | Manual Engine Oil Extractor Oil Changer Vacuum Fluid Extractor Pump Tank Remover 7L

  • 7L Oil Extractor: The manual oil extractor is made of high-quality polypropylene for durability and resistance to corrosion and rust. Its capacity can....
  • Four Fluid Extractor Hoses: The manual fluid extractor comes with four suction hoses to change different sizes for various conditions. Along with the....
  • Fluid temperature range: 35°F- 200°F/1°- 95°C.
  • Easy To Use: You can change engine oil and transmission fluid by merely opening the hood, inserting an appropriate hose to the bottom of the oil pan.....
  • Wide Application: The fluid extractor is widely used to extract the engine oil, brake fluid, ATF fluid, and other non-corrosive and non-thick fluid of....
Check Stock

ATPEAM Oil Changer Vacuum Fluid Extractor | Manual Engine Oil Extractor Oil Changer Vacuum Fluid Extractor Pump Tank Remover 9L

  • 9L Oil Extractor: The manual oil extractor is made of high-quality polypropylene for durability and resistance to corrosion and rust. Its capacity can....
  • Four Fluid Extractor Hoses: The manual fluid extractor comes with four suction hoses to change different sizes for various conditions. Along with the....
  • Fluid temperature range: 35°F- 200°F/1°- 95°C.
  • Easy To Use: You can change engine oil and transmission fluid by merely opening the hood, inserting an appropriate hose to the bottom of the oil pan.....
  • Wide Application: The fluid extractor is widely used to extract the engine oil, brake fluid, ATF fluid, and other non-corrosive and non-thick fluid of....
Check Stock

COMPLETE & UNABRIDGED 1984 CORVETTE FACTORY REPAIR SHOP & SERVICE MANUAL - INCLUDES; 1984 Hatchback, '84 Convertible,

  • 【Warm Up Your Engine Quickly】In cold winters, use Silicone Heater Pad for 10-15 minutes to ensure your engine and transmission fluid circulates efficiently before starting. For those cold mornings, the device quickly heats the oil to the right temperature..
  • 【Improve Oil Flow】You will get 2 Car Engine Heater Pad. When plugged in, Engine Warmer will transfer heat to keep engine oil a thin fluid, giving you instant lubrication when you start the engine, this reduces wear and extends the life of the engine & transmission..
  • 【Thermostatic Control】Car Battery Heater Pad rated power 120 volts, 150 watts, built-in automatic thermal protector keeps the heating temperature at a constant 194°F/90°C, effectively preventing safety hazards caused by high temperature..
  • 【Built to Last】Made of wear-resistant silicone. Oil Pan Heater Pads are waterproof, oil-proof, acid-proof and low-temperature resistant. Only designed for use on automotive metal surfaces such as engine oil pan, fuel tank, reservoir, transmission, etc. Not for personal use or on plastic..
Check Stock

Learn Numbers, Shapes and Colors at the Amusement Park with Max the Glow Train

  • Heated Engine: Help you start car quickly. In cold winter, use silicone heating pad to heat the engine and transmission before starting the car, reduce the consistency of the oil to keep the oil as a thin liquid, thus better lubricating the engine and reducing wear and tear, extending the life of the engine and transmission and starting the car quickly..
  • Replaces Block Heaters: Magnets do not work on aluminum oil pan, which is what most cars have. Oil pan heaters are suitable for both cast iron and aluminum engine oil pans.Economical and convenient solution..
  • High Quality Material: Made of high quality silicone, waterproof and oil-proof, the waterproof design of the silicone and power cord connection reduces the risk of short circuit. The hotter the upgraded silicone is the stronger the adhesion. Fast heating, then constant at 194 ℉ / 90℃, prevent the safety hazards caused by high temperature..
  • Easy to Install: Clean and dry the flat surface of the device, peel off the paper backing and apply the oil pan heater, using magnets/adhesives can extend the adhesion time (magnets and adhesives not included).
Check Stock

ABN Silicone Heater Pad Car Battery Heater Pad Engine Block Heater Pad Oil Pan Heater Pad, 4x5 Inch – 120V 250 Watt

  • KEEP YOUR ENGINE WARM: On a cold winter day, use the ABN 250-Watt 4x5 Inch Silicone Rubber Heater Battery Heating Pad 10 or 15 minutes prior to start up for perfect engine oil temperature.
  • Device heats the oil quickly up to 194 degrees Fahrenheit (90 C) for those cold start mornings.
  • IMPROVE OIL FLOW: Transmits heat (to a built-in maximum temperature of 194 F / 90 C) to keep engine oil as a thin fluid, giving you instant lubrication when starting your engine.
  • Increases engine longevity and extends transmission life.
  • EASY TO INSTALL: Clean application surface, peel off paper backing to adhesively attach 4-inch x 5-inch (10.2cm x 12.7cm) pad to outside of clean oil pan or other metal surface, then plug the 5.75-foot (1.8m) 2-prong power cord into any wall outlet for instant warming.
  • Once applied, the stick on oil pan heater remains permanently installed on any metal surface (seal edges for longer adherence.
  • BUILT TO LAST: Flexible heating pad is rated at 120 Volts and 250 Watts.
  • Constructed with silicone coat covering for oil resistance, acid resistance, and added strength and longevity.
  • Power cord stays attached : not removable.
  • FOR AUTO WARMING: 250-watt car engine heater pad designed to heat fluids with any ....
Check Stock

M14 x 1.5MM Stainless Steel Magnetic Oil Drain Plug with Neodymium Magnet Fits for Honda Acura Ford GM Mazda Hyundai KIA And More Vehicles

  • 【Function】The Purpose of Designing a Magnetic Oil Drain Plug is Simply to Ensure a Better Engine Performance by Keeping The Metal Debris Away and Keep The Engine Oil Stored to Increase The Engine Life..
  • 【Compatible】Sized around M14x1.5, This Engine and Transmission Oil Pan Plug Is Compatible with Almost Any Vehicle Having The Same Size Thread. Great Replacement for Car, Boat, Motorcycle and Other. It Goes Best with Most of the Models of Kia, Ford, GM, Hyundai Acura and Other.Please Check Your Thread Pitch Before Purchase..
  • 【Easy Installation】M14 x 1.5 stainless steel oil drain plug It is recommended that you wipe the debris off the magnet every time you change the oil..
  • 【Premium Quality】Made of High Quality Material. Tested & Certified to Meet or Exceed OEM Quality Standards..
  • 【12-Month Warranty】The Stainless Steel Magnetic Oil Drain Plug come with 12 Months Warranty. Hassle-free Return and Refund Policy. Please Buy it with Your Confidence..
Check Stock

Oil Filter Wrench, Engine Oil Funnel, and Drain Tool Set Compatible with Toyota Lexus Scion Camry Tundra Highlander 2.0-5.7L Engine with Oil filter mesh, 64mm Cartridge Style Oil Filter (Red)

  • This set contains tools needed for oil change : Heavy oil filter wrench, copper drain tool, nylon clamp and multifunctional engine oil funnel, Oil filter mesh..
  • Compatible With : For most Toyota, Lexus, and Scion vehicles. Such as RAV4, Camry, Tundra, Highlander, Sienna, Sienna, Tacoma, Sequoia, Avalon, Corolla, FJ Cruiser, Venza vehicles. Please note that ：It does not fit the 1.8L engine or vehicles that use disposable spin - on style oil filters.
  • Quality Wrench : which is very suitable for the 64mm cartridge type oil filter. It has a regular 14-sided shape, and the distance between the opposite sides is 64mm, so it will fit a 64mm traditional tank filter..
  • Clean & Fast Oil Change : The drain tool makes the oil change process much cleaner by directing oil flow right into your oil pan to prevent splatter.The multifunctional funnel can be directly connected to the neck of the oil filter element, by fixing the funnel with a comfortable nylon clip. The nylon clip has a retainer and thread to fix the funnel, which will be very sturdy when used..
  • Good Customer Service : We aim to provide good quality product and sincere service for our customers, If you have any questions about the product, please feel free to contact us We will solve it for you ..
Check Stock

WEIAND FABRICATED OIL PAN KIT,7 QUARTS,GOLD ZINC FINISH,9" DEPTH,REAR SUMP,DRAG RACING,COMPATIBLE WITH 1979-1993 FORD MUSTANG 351W CONVERSION

  • ...een underneath. Weiand aluminum oil pans helped them get down the strip with 7-quart oil capacity and fins to keep them cool!.
  • Times and styles have changed, but Weiand is back and proud to announce their latest release of fabricated oil pan kits for Big Block Chevy, GM LS-engines, Small Block Ford & Mopar B/RB engine applications!.
  • Features: Oil Pan Kit comes complete with the following: application specific oil pan, oil pan gasket, oil pump pickup and pan mounting bolt kit | Trap door baffles keep oil under control during hard acceleration | Increased oil capacity to keep high perfomance engine oil systems fed properly | Gold Zinc Finish | Popular applications for drag race applications.
  • Specs: Application: 1979-1993 Mustang 351W | Brand: Weiand | Crank Scraper Included: No | Dipstick Location: None | Emission Code: 5 | Finish: Gold Zinc Finish | Material: Stamped Steel | Oil Pan Capacity: 7.0 Quarts | Oil Pan Depth: 9.00" | Oil Pan Type: Fabricated | Product Type: Oil Pan Kit | Sump Location: Rear | Windage Tray Included: No.
Check Stock