Reviews Engine Mount Bolt

14T Centrifugal Clutch and #420 Chain For Harbor Freight Predator 8HP 301cc Go Kart

  • 4 Stroke Engine, Semi Automatic (3 forward 1 reverse gear), electric start, single cylinder.
  • Front sprocket: 420 - 17mm - 14T, Ignition Method: CDI.
  • Top Engine Mount: 3.62'', Bottom Engine Mount: 3.23'', Bolt to Bolt: 5.98.
Check Stock

Motorized Bicycle Offset Wide Frame Chopper Mount Kit

  • SOLUTION FOR CHOPPER BIKES: The Speed Demon Off Set Chopper mount is the solution to those difficult chopper bike builds. Making engine mount fabrication a thing of the past, this bracket will sit in your frame and provide a mount for your two stroke engine. No welding required, it's all bolt on!.
  • HEAVY DUTY: Constructed of laser cut high grade steel, the bracket is designed to bolt directly to your frame and secure your engine. It's compact design takes very little space in your frame so that you have extra space for any accessory you want to instill along side your engine kit..
  • EASY INSTALLATION: Installation is a breeze, just use the supplied u-bolts and clamp your bracket to your chopper bike and install your engine directly to the bracket. It's that simple!.
  • UNIVERSAL FIT: This chopper mount kit is designed to work with most standard 48cc, 60cc, 66cc and 80cc 2-stroke engines as well as most chopper style bikes such as the OCC Schwinn Bikes, Micargi Jaos, Micargi Prado Deluxe, Micargi Mustang GTS, and many other chopper frame style bikes!.
  • PACKAGE INCLUDERS: 1x Speed Demon Engine Bracket, 2x U-Bracket Mounts, 1x V-Bracket Mounts, 2x Vibration Dampening Hoses, 1x Bag of Nuts and Washer.
Check Stock

45L PCC MOTOR Lifan 125cc Motor Dirt Bike Engine Basic 125M-B EN18-BASIC

  • Top Engine Mount : 92mm Bottom Engine Mount: 79mm Bolt to Bolt :152mm(6").
  • Bore x Stroke: 54mm x 54mm, this is a 'square' engine for best balance between power and torque.
  • Gears: 4-speed, manual clutch, All new 4 up System..
  • Buyer will receive Lifan 125CC Motor, Intake manifold, intake gaskets, Shifter, Kick Starter and Spark Plug..
Check Stock

125cc Engine Motor,4-Stroke Horizontal Single-Cylinder Air-Cooled Engine Motor Carburetor Wiring Harness and Exhaust Muffler With Pipe Kit ATV TRX125 ATC110

  • ♛ 【TYPE】Horizontal, single-cylinder, 4-stroke, air-cooled..
  • ♛ 【POWER】Start Method : Electrical Start.
  • Bore x Stroke : 52.4 × 55.5 mm, 119.7 mL.
  • Maximum net power/ rpm : 5.8 kw/ 7500r/ min±375 r/ min.
  • Maximum torque/ rpm : 8.5 N.m/5000r/min±250 r/min.
  • ♛ 【PACKAGE INCLUDES】125cc Engine Motor comes with:Wiring+ carby+Airfilter+ Chain case + Gasket As you see in the picture..
  • ♛ 【NOTE】 Installation Manual Is NOT Included.
  • Professional Installation Is Highly Recommended.（ Note: There is a .093 difference between the bolt hole and a spot on the bottom of the engine. Would like to use some sort of shim to prevent damage from product use）.
  • ♛ 【AFTER-SALES SERVICE】: 100% service Guarantee, please be assured the purchase. Our products are sent from the US/NJ and can be delivered quickly. If you have any questions or quality issue,please feel free to contact us..
Check Stock

125CC Engine Start Motor Semi Auto 3 SPEED w/Reverse and Wiring Harness For Go Kart ATV QUAD BUGGY 4 WHEELERS COOLSTER USA STOCK

  • 【Main Parameter】ENGINE SIZE : 125CC GEAR SYSTEM : 3 FORWARD.
  • REVERSE Type : Horizontal, single-cylinder, 4-stroke, air-cooled Start Method : Electrical Start Bore x Stroke : 52.4 × 55.5 mm, 119.7 mL Top Engine Mount : 92mm Bottom Engine Mount: 82mm Bolt to Bolt :152mm (6") Compression ratio : 9.0: 1..
  • 【125CC Motor Engine 】A high performance engine, perfect for those comfortable with faster engines and have a desire to get up and go..
  • 【Wiring】1. Five wires (Plug): For gear indicator 2. Yellow wire: For storage battery 3. Pink (or Yellow) wire: For storage battery 4. Black & Red wire: For signal trigger 5. Green wire: For grounding 6. Blue & White: For trigger coil.
  • 【Application】Compatible with Ducar, Lifan, Gy6, Thumpster, Thumbstar, Go kart, Quad, Dirt bike, ATV, Pit bike, Dirt bike, Buggy, Pocket rocket etc..
  • 【100% Service Satisfaction】USA STOCK, delivery time need about 5-8 days. If you have any problems with the purchasing, please feel free to contact us. MONIPA are always at your service..
Check Stock

Predator 212cc mounting Plate kit - Engine Mount with Bolts fit for Harbor Freight Predator Engine 212cc 6.5hp

  • engine mount is for Harbor Freight Predator Engine 212cc 6.5hp.
  • Other engines with the bolt pattern dimensions below will also work..
  • The plate will need to be welded or bolted into place. This Heavy Gauge Steel Plate is 12" long x 5.25" wide. Bolt pattern is 6.5" long center to center , and 3-1/8" wide center to center. Bolt hole slots are 1.25" from end to end. Comes with automotive grade mounting hardware..
  • 1 Year Unlimited-mileage Quality Guarantee.
Check Stock

NEW SOUTHWEST SPEED TUBULAR TRANSMISSION CROSSMEMBER AND POLYURETHANE MOUNT FOR 1955-1957 CHEVY WITH POWERGLIDE, TURBO TH 350, TH 400, 700R4, MUNCIE, SAGINAW, 3 & 4 SPEED, TRIM-TO-FIT TRANSMISSION MOUNT WITH HARDWARE, TRI-5, BEL AIR, 150, 210, NOMAD, SEDAN DELIVERY, DELRAY

  • ...fortunately, It Won't Work With Any Of The Convertible Frames That Have The X-Braced Frame, That Encases The Drive Shaft..
  • This Crossmember Will Also Work With GM Manual Transmissions, Including Later Model Muncie & Saginaw 3 & 4 Speed Manual Transmissions, And Allows The Use Of Bellhousings That Don't Have The Rear Engine Mounts On The Bottom Of The Bellhousing. This Is Extremely Helpful When You Are Trying To Install Newer Model Engine And Transmission Combinations In The 55-57 Chevy. This Crossmember Moves The Rear Engine/transmission Mounting Location From The Bottom Of The Bellhousing To The Tail Housing On The Transmission. | * This Transmission Crossmember Kit Includes The Polyurethane Transmission Mount, Which Offers Added Strength Without The Harshness Of A Solid Mount, Making It A Smart Upgrade Over Traditional Rubber Mounts. | * This Crossmember Is Not A Universal Fit Unit. | * This Is A Direct Bolt-In And Also Increases Exhaust Pipe Clearance In Critical Areas..
  • Kit Includes: Southwest Speed 1955-1957 Chevy Tri-5 Tubular Auto/Manual Transmission Crossmember (# 400-7084) | * Adjustable Mounting Brackets | * Made From Heavy Gauge Steel Tubing | * Includes All Hardware To Mount Crossmember | * Black Powder Coated To Resist Corrosion | * Southw....
Check Stock

Black Engine Billet Motor Torque Mount Bracket kit for B16 B18 B20 D16

  • CNC machined from billet 6061-T6 aircraft aluminum and come with High Density Wear Resistant Polyurethane bushing inserts, with billet aluminum bolt sleeves..
  • Torque mounts will greatly reduce engine movement and allows for better shifting and clutch engagement as well as less chance of parts breakage..
  • Engine Billet Motor Torque Mount Fits 1992-2000 Honda Civic EG EK B-Series D-Series B16 B18 B20 D16.
  • Package Content : 2 x Torque Mount and Screw kit.
Check Stock

Dasen Chrome Triple Plating Mustache Engine Guard Highway Crash Bar Compatible with 2000-2017 Harley Softail FL

  • Fitment: Fit 2000-2017 Harley Softail FL.
  • Triple Plating Chrome (copper & nickle & chrome plating), high quality Chrome plated finish ,waterproof and durable material for rusting resistance and long service time..
  • Design for engine protection, strong frame connection and protect motorcycle bodywork and Engine parts, provide a more comfortable and slip resistant cushion for your foot..
  • Easy to install,not included instruction. Bolt into engine guard easily and quickly.(Replace OEM Part Number 49140-05B).
  • Package include: 1 x Engine Guard Crash Bar and mount hardware..
Check Stock

Autobahn88 Engine Torque Damper Kit, compatible with Nissan Skyline GTR R33 R34 RB26DETT BCNR33 BNR34

  • Fitment compatible with Nissan Skyline GTR R33 R34 RB26DETT BCNR33 BNR34.
  • The Engine Damper mounts in between your vehicle's engine block and firewall to effectively control horsepower and torque. Keep your motor supported as you slam through those gears while adding a nice showpiece under the hood. Creates less stress to engine mounts, giving you more power to the wheel.
  • Reduce Engine damping and bumping. Increase Lifespan of your Engine Mount.
  • Made by aluminum. Includes all thick and strong mounting kit.
  • Direct Bolt On. No modification is required that can DIY in 30 mins.
Check Stock

The ROP Shop | 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500

  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube (come installed).
  • This pump is for vertical gas engine driven units. In some instances, the pump may need to be removed to change engine oil. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4.5-7 HP. The pump has a hole in the leg for draining the engine oil. The pump includes a built-in pressure control valve, downstream chemical injection system and thermal relief valve.
  • This has the outlet facing the front. Some specific pressure washers may require longer bolts and spacers to mount the pump to your engine. These bolts and spacers are NOT included, but may be purchased at your local hardware store. Common bolt sizes: Two - 5/16" 18 x 2 1/2", One - 5/16" 18 x 3 1/2".
Check Stock

CDHPOWER Bicycle-Engines Black V-Frame Mounting Plate Kit,Heavy Duty 4-Stroke Mount Plate - Gas Motorized Bicycle 49cc

  • Bicycle-Engines Black V-Frame Mounting Plate Kit 4-Stroke Mount Plate for 49cc.
  • Brand new 4-stroke mount plate in black color that mostly apply on your favorite bike.
  • Measurement of Bolt Hole where the engine mounts:6.5mm*26.5mm.
  • Heavy duty industrial use 4-stroke mount plate.
  • 4-stroke mount plate Compatible with 49cc.
  • This product Comes with 12months Warranty. Any questions,please contact us firstly! we can help you solve the problem until you are satisfied..
Check Stock

Mutazu Chrome Frame Covers ABS Plastic for Suzuki Hayabusa GSXR 1300 (SC-10)

  • The Precision lower front engine cover is sculpted and defined for a clean appearance.
  • The cover conceals the lower portion of the frame, kickstand assemply, front engine stabilizer, floorboard mount, and the wiring leading to the voltage regulator.
  • Includes (1) lower frame cover and (1) 3/8-16 x 2.25" socket head cap screw.
  • Suggested for installation (not included): set of hex wrenches, set of hex bit sockets, and (1) torque wrench.
  • Compatible with Harley-Davidson: '17-'19 Electra Glides, Road Kings, Road Glides & Street Glides.
Check Stock