Reviews Engine Machine

Outboard Motor, 6hp Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System (2 Stroke 6 hp)

  • Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm（17.32inches） (inclusive) transom height.
  • Hangkai two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
  • Hangkai two-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
  • Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
  • The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adopts an international standard air intake system and compression ratio, which can effectively improve combustion efficiency and thus reduce fuel consumption. It....
Check Stock

New Cylinder Engine Hone Kit 2\ to 3\ Honing Machine + 32 PCS.

  • Cylinder Engine Hone Kit 3-1/2" To 6-1/2" + 32 Stones+ 4x Extra Carriers.
  • Stone Grit::120, 180, 220, 320 , Machine Type:Honing Machine Function:HoningModel Year:2021.
  • Heavy Duty CYLINDER ENGINE HONE KIT - 3-1/2" To 6-1/2"HONING MACHINE WITH HONING STONES + Extra Set Of 4x Stone Carriers (As Shown In First Image) COARSE 120, MEDIUM 180, FINE 220, Extra Fine 320 COMPLETE HONING MACHINE - HONE KIT.
  • SIZE – 3-1/2" To 6-1/2" Heavy Duty CYLINDER ENGINE HONE KIT WITH HONING STONES COMPLETE HONING MACHINE - HONE KIT With HONING STONES 8x COARSE 120, 8x MEDIUM 180, 8x FINE 220, 8x SUPERFINE 320.
Check Stock

Vintage Rat Rod Pickup Truck Hot Rod T-Shirt

  • 【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel..
  • 【DIESEL ENGINE SPECIFICATIONS】Model：186F Туре：Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system：Direct injection Bore*stroke(mm)：86x70mm Displacement capacity(cc)： 406cc.
  • 【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
  • 【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth.
  • 【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields..
Check Stock

Block Cylinder Engine Hone KIT 2.5\-5.5\ HONING Machine with 4X HONING Stone

  • New Cylinder Engine Hone Kit 62 to 138 mm + 32 Stones+ 4x Extra Carriers.
  • Stone Grit::120, 180, 220, 320 , Machine Type:Honing Machine Function:HoningModel Year:2021.
  • Heavy Duty CYLINDER ENGINE HONE KIT - 62 to 138 mm HONING MACHINE WITH HONING STONES + Extra Set Of 4x Stone Carriers (As Shown In First Image) COARSE 120, MEDIUM 180, FINE 220, Extra Fine 320 COMPLETE HONING MACHINE - HONE KIT SIZE – 62 to 138 mm.
  • Heavy Duty CYLINDER ENGINE HONE KIT WITH HONING STONES COMPLETE HONING MACHINE - HONE KIT With HONING STONES 8x COARSE 120, 8x MEDIUM 180, 8x FINE 220, 8x SUPERFINE 320.
Check Stock

New Cylinder Engine Hone Kit 34 to 60MM + 32 Set of Stones+ 4X Extra Carriers

  • New Cylinder Engine Hone Kit 88 to 165mm + 32 Stones+ 4x Extra Carriers.
  • Stone Grit::120, 180, 220, 320 , Machine Type:Honing Machine Function:HoningModel Year:2021.
  • Heavy Duty CYLINDER ENGINE HONE KIT - 88 to 165mm HONING MACHINE WITH HONING STONES + Extra Set Of 4x Stone Carriers (As Shown In First Image) COARSE 120, MEDIUM 180, FINE 220, Extra Fine 320 COMPLETE HONING MACHINE - HONE KIT SIZE – 88 to 165mm.
  • Heavy Duty CYLINDER ENGINE HONE KIT WITH HONING STONES COMPLETE HONING MACHINE - HONE KIT With HONING STONES 8x COARSE 120, 8x MEDIUM 180, 8x FINE 220, 8x SUPERFINE 320.
Check Stock

GM 6.2 & 6.5 Liter Diesel Engines: How to Rebuild & Modify

  • 【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel..
  • 【DIESEL ENGINE SPECIFICATIONS】Model：186F Туре：Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system：Direct injection Bore*stroke(mm)：86x70mm Displacement capacity(cc)： 406cc.
  • 【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
  • 【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth.
  • 【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields..
Check Stock

Gasoline Boat Engine Motor 4 Stroke 15HP Inflatable Fishing Boat Gas Engine Motor 196CC Single Cylinder for 10-20ft Fishing Boats Foam Boats, Up To 12.5 Mile/H (15HP 4-Stroke Gasoline Engine)

  • ...stroke universal gasoline fishing engine, this gasoline engine power directly drives the propeller to rotate at a high speed through the coupling drive shaft to generate driving force to push the boat forward..
  • 【INGENIOUS STRUCTURE DESIGN】Ingenious design, simple structure and light weight. The propeller-mounted machine adopts the structure of the gasoline engine to directly drive the propeller, eliminating the need for complex mechanisms such as clutches and transmissions, making the product structure very simple and practical, and the frame and armrests are made of high-quality pipes..
  • 【MAIN PARAMETERS】Model: GB420, Displacement: 420CC, Power: 9KW, Horsepower: 15HP, Speed: 3600 RPM, Speed: up to 12.5 mile/h, Starting method: Manual Start, Fuel type: ≥ 92 unleaded gasoline, Fuel tank capacity: 203 fl oz, Engine oil volume: 37 fl oz, Bore diameter: 3.5'', Bracket size: 92'' x 16'' x 7.5'', Machine size: 18'' x 18'' x 14''. (Package includes: 1 x GB420 Gasoline Engine + 1 x Bracket.).
  • 【WIDE APPLICATION】Economical and practical gasoline bost engine with strong applicability, can be widely used in the installation and use of 10-20ft small wooden boats, tin boats, bamboo rafts, foam boats, fishing boats, fishing boats, glass fiber reinforced p....
Check Stock

Viewer Questions: Fuel System Requirements When Converting From Gas to Diesel

  • ...n install the throttle cable as needed..
  • 【Fast Heat Dissipation】4 Stroke single cylinder air cooled vertical engine has an air-cooled diesel engine made of aluminum alloy with reinforced and thickened treatment, which makes it have good heat dissipation and protect the machine..
  • 【Small Space Occupation】Tiller crude oil engine has compact structure and small size, occupying less space than other engines..
  • 【Wide Range of Application】Heavy duty single cylinder air- cooled diesel motor engine is suitable for road cutting machine, grinder, water pump, microtiller, air conditioner compressor, microtiller, etc. Packing list:Screw driver + 14-17mm wrench + connecting plate set screw + fixed key + screw gasket + and a 10-12mm wrench+Diesel engine..
Check Stock

186F 9HP Diesel Engine 4 Stroke Single Cylinder 406CC Forced Air Cooling Diesel Engine for Agricultural Machinery

  • 【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel..
  • 【DIESEL ENGINE SPECIFICATIONS】Model：186F Туре：Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system：Direct injection Bore*stroke(mm)：86x70mm Displacement capacity(cc)： 406cc.
  • 【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
  • 【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth.
  • 【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields..
Check Stock

New Cylinder Engine Hone Kit 62 to 138 mm + 32 Stones+ 4X Extra Carriers

  • New Cylinder Engine Hone Kit 34 TO 60MM + 32 Set Of Stones+ 4x Extra Carriers.
  • Heavy Duty CYLINDER ENGINE HONE KIT - 62 to 88 mm HONING MACHINE WITH HONING STONES.
  • Extra Set Of 4x Stone Carriers (As Shown In First Image) COARSE 120, MEDIUM 180, FINE 220, Extra Fine 320 COMPLETE HONING MACHINE - HONE KIT SIZE – 62 mm to 88 mm.
  • Heavy Duty CYLINDER ENGINE HONE KIT WITH HONING STONES COMPLETE HONING MACHINE - HONE KIT With HONING STONES 8x COARSE 120, 8x MEDIUM 180, 8x FINE 220, 8x SUPERFINE 320.
Check Stock

Runleader Digital LED Engine Hour Meter,RPM &Temperature Display,Maintenance Reminder,External Powered Operating for Lawn Mower Generator Dirtbike Paramotor Outboard Motor Marine Compressor

  • TACH/HOUR METER----It is a multifunctional meter include functions Engine temperature meter gauge,TOT hours,JOB timer,Maintenance service timer,Tachometer..
  • TEMP METER GAUGE----Use the temperature sensor to measure engine real-time temperature value.
  • Programmable over-temperature alert reminder.
  • Maximum temperature value is viewable and resettable..
  • HOUR MERER----TOT hours help you to track how many hours are the engine/machine working.
  • JOB timer is used to measure the time of a particular work job such as change oil, it is resettable.
  • Maintenance timer is countdown tracking, remind the arrived status by red light and waring icon..
  • TACHOMETER----Record the real-time RPM value when engine is on, help to adjust engine idle.
  • Programmable engine firing patterns to keep the RPM value more accurate.
  • Flashed red light & warning icon for Alert RPM.
  • Data retained when engine /machine shutdown.
Check Stock

Diesel Motor Engine,3.6Kw 4 Stroke Single Cylinder Air Cooled Vertical Engine,Heavy Duty Diesel Motor Engine for Road Cutting Machine,Grinding Machine

  • 【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel..
  • 【DIESEL ENGINE SPECIFICATIONS】Model：186F Туре：Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system：Direct injection Bore*stroke(mm)：86x70mm Displacement capacity(cc)： 406cc.
  • 【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
  • 【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth.
  • 【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields..
Check Stock

DLE Engines 30-C28#3 DLE30 Electronic Ignition

  • 【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of....
  • 【DIESEL ENGINE SPECIFICATIONS】Model：186F Туре：Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system：Direct....
  • 【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
  • 【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread....
  • 【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage....
Check Stock