Reviews Engine Cylinder Heads

OEMTOOLS 37138 Compression Tester Gauge Set, Compression Tester Automotive, Engine Compression Tester with Flexible Hose, 14mm and 18mm Adapters

  • ESSENTIAL CYLINDER COMPRESSION TESTER: Monitor the health of your engine with an accurate reading from our tester.
  • Featuring a 14mm and 18mm adapter for spark plug ports.
  • Read the condition of your engine’s cylinders with our easy-read pressure gauge.
  • ACCURATE COMPRESSION READINGS: Our engine compression gauges give you an accurate reading of engine's compression.
  • The compression test kit's flexible rubber hose extension allows you to easily access spark plug ports.
  • GREAT FOR CARS AND TRUCKS: Maintaining your vehicle’s engine is essential to the longevity of the vehicle.
  • Work on cars and trucks with the cylinder compression test kit's 2-step 14mm and 18mm adapters to determine the health of your cylinders.
  • DIAGNOSITC TOOL: Diagnose problems with your vehicle’s cylinders using our engine compression test kit.
  • Valves sticking, cracked cylinder heads, worn cylinder walls, and more can be diagnosed with our cylinder compression tool.
  • PRODUCT SPECIFICATIONS: This compression tester kit features a flexible rubber hose extension to reach spark plug ports.
  • (2) 2-step adapters sized 14mm and 18mm for cars and trucks.
Check Stock

ICT Billet 4pc LS Cylinder Head Install Alignment Dowel Pin Steel LT Gen 3 Gen 4 Gen 5 LSX LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 LR4 L82 L83 L84 L86 L87 LT1 L8B 551275

  • Replace Your Rusty or Missing Dowels Before you Assemble Your Engine.
  • These are Required when Installing Cylinder Heads on Your LS Engine.
  • Compatible with all Gen 3 4 and 5 LS/LT Series Engine.
  • Includes 4 Dowel Pins Enough to install 2 cylinder heads.
  • Stock replacement cylinder head bolts also available for LS engines.
Check Stock

Moroso 68456 Fabricated Aluminum Valve Covers, Fits Big Block Chevy Engines w/Big Chief/Big Duke Heads

  • Fits: BBC with Dart Big Chief and Brodix Big Duke Style Cylinder Heads. Does not fit Dart Big Chief II, 11 Degree Cylinder Heads. Clears Jesel and T&D style Rocker Shaft Assemblies 3" Tall Fabricated entirely from superior quality aluminum, ultra-lightweight One-piece billet rail is CNC machined to ensure a precision flat surface for superior sealing Airtight sealing allows the engine to pull greater vacuum for improved ring seal and power Designed with a broad, flat surface for engine builder engraving Can be polished, chromed, power coated or left as-is for a race look Studs not included *Not legal for sale or use on pollution-controlled vehicles.
Check Stock

XS-Power 93-01 HONDA PRELUDE H22A1 H22a4 h22a HEADER GASKET exhaust manifold gasket

  • Sturdy & Durable: This complete cylinder head is made of premium aluminum material, which can endure high pressure, and overheating, not easy to be....
  • Precisely Matched: It adopts advanced casting skills to build a high strength and stiffed cylinder head assembly, with an accurate dimension to help....
  • Superior Performance: The engine cylinder heads feature a compact structure, sits above the cylinders on top of the cylinder block. It traps or....
  • Complete & Assembled: Each of our cylinder head has gone through very strict quality inspections before being taken out of the factory and all of them....
  • Vehicle Fitment: This is a Cylinder Head, 2.4L SOHC 22R 22RE 22REC Engine Type, which is compatible with 1985-1995 4Runner 2.4L SOHC 8v 4Cyl, 1985....
Check Stock

Alumaseal ASBPI12 1 Oz Radiator Sealer

  • Using nanotechnology, this product fills in cracks & crevices other products can't, making a stronger, more solid bond than competitors' products.
  • Compatible with all types of anti-freeze.
  • Use on aluminum engine blocks, cooling systems, cylinder heads, engine blocks, freeze plugs, head gaskets, heaters cores, iron engine blocks, metal radiators, plastic radiators, radiators, water pumps.
Check Stock

PAGOW Spark Plug Boot Wire Removal Tool Ignition Coil Puller for Volkswagenn Audi VW Hand Install Repair Tool

  • Best Compatibility: The spark plug wire puller installer can perfect match with Volkswagen and Audi vehicles with standard prong plug caps on each side (not recommended for non-VW/Audi plug leads). Volkswagen – New Beetle 2.0 engine AZJ (AEG), Golf IV & V 1.6 engine (AVH), 1993-2005 2.0L 4 cylinder (AZG), 1998-2006 1.8L 4 cylinder (BBW), 2006 and later 2.0L 4 cylinder turbo (BDC).
  • Audi – 1998-2006 1.8L 4 cylinder turbo (BEV), 2006 and later 2.0L 4 cylinder turbo (BGD)..
  • Size Inforamtion: The size of spark plug boot removal tool kit: 12.6inch (32cm) overall length, 3.75inch x 0.4inch x 1.2inch (9.5cm x 1cm x 3cm) handle, 9.25inch (23.5cm) shaft, 2.2inch x 0.8inch (5.6cm x 2cm) boot end..
  • Wide Applications: The spark plug puller tool suitable for Bora, Mercedes, Smart, and other Volkswagen and Audi vehicles with similar engines and standard prong plug caps on each side..
  • Easy to Use:Perform spark plug change when engine is cold to prevent the heads from stripping. After pulling the plugs, we recommend applying lubrication to make the job easier. When installing wires, refrain from pushing too hard without the tabs aligned on the tool to prevent the boot end from spreading and getting stuck..
  • Material:The handle of ignition coil puller is made of hard p....
Check Stock

N351 Pushrod Guide Plates, Fits Ford, 5/16 Inch

  • Guide plates are specifically designed to work with the Small Block Ford V8 engine.
  • Made from durable steel with a natural finish.
  • Will work on 351N cylinder heads with the 5/16" push rods.
  • Comes in a set 8 eight to do the entire engine.
Check Stock

S&S Cycle S&,S Cycle Super Stock Cylinder Head Kit

  • High port flow gives great performance now, and more later when additional upgrades are done.
  • Heads are fully assembled with springs and valves, and are available in silver or black powder-coat finish to match OEM components.
  • Compression ratios vary depending on cylinder heads chosen, pistons used and engine displacement.
  • Heads are machined for compression releases (sold separately).
  • S&S rocker boxes required when using S&S compression releases.
  • Do not include rocker arm components, intake manifold, gaskets or headbolts (requires eight long OEM length head bolts).
Check Stock

Motion Raceworks Vacuum Boost Reference Billet Aluminum Distribution Block

  • This billet aluminum vacuum/boost reference billet distribution block is made to simplify and clean up plumbing lines for boost and vacuum purposes on your boosted LS engine..
  • The design allows the block to be mounted universally or off the upper two most holes on LS1 cylinder heads front or rear as well as on a firewall, or anywhere else. This manifold is CNC machined from 6061 aluminum and features 8 separate 1/8 NPT ports and 2 1/4" NPT ports (on each end) giving you many different options for line routing and enough spaces for all of your boost reference signals.
  • This works great for plumbing to your boost reference fuel pressure regulator, manifold pressure wastegates, blow off valve, map sensor, boost controller sensor and many other items. Comes with two stainless button head bolts with the correct length and thread to mount block to cylinder heads..
  • Comes complete with 4 1/8" port plugs and 1 1/4" port plug standard..
Check Stock

COMP Cams 4705-16 ID Spring Locator Set of 16-1.300\ OD.570\ ID.060\ Thickness

  • ... to their appropriate installed height. Since they are available in multiple locator thicknesses, these locators eliminate the need to stack shims, while also adding to valvetrain stability and durability..
  • Protect Your Head - Valve springs should never be installed directly on aluminum heads. Protect your expensive cylinder heads by installing springs on our hardened steel spring locators..
  • Made to Measure - Made for both factory and aftermarket cylinder head dimensions, these spring seats are available for nearly any engine. With options in multiple O.D.'s (outside diameters), I.D.'s (inside diameters) and thicknesses, COMP has a locator to fit your valvetrain project..
  • Precision Machined for Consistency - Crafted in-house, using the best machining equipment, COMP Cams seats and locators are precision machined to ensure consistent thickness and inside/outside diameters for a perfect fit everytime..
  • Quality Guaranteed - COMP Cams' valve spring locators are made from a hardened steel alloy that not only protects expensive cylinder heads but also ensures the durability of valve springs, valve guides and retainers. Held to the tightest tolerances in the industry, our locators are a worthwhile investment for your next spring change..
Check Stock

100cc 2-Stroke Bicycle Engine Kit Full Air-Cooling Motor Bike Modified Set Motorized Motor Bike Modified Tool offering Max Speed 48km/h

  • The bicycle engine kit contains the necessary items to turn your pedal bicycle into a motorized bicycle..
  • The 50mm diameter single-piece cylinder head increases the load-bearing capacity, reduces the working temperature and makes it easier to start..
  • The choke lever on the handlebar provides more fuel when the choke door is opened instead of restricting air, which is very suitable for cold weather..
  • This bicycle kit uses high-quality wear-resistant iron sleeve cylinders and enlarged cylinder heads, so that the machine has the effects of high....
  • Modifying a thick bike, you can stop or start the engine while riding..
Check Stock

Gumout 510016 All-in-ONE Complete Fuel System Cleaner 10oz Pack of 6

  • The ALL NEW CarbonClear technology combines the PEA cleaning power you have come to trust with PIBA, and a patented technology for a better clean.
  • Complete fuel system cleaner improves performance across the fuel system.
  • Conditions fuel to fight corrosion, extending the life of key engine parts.
  • Reduces friction and wear in the upper cylinder, improving horsepower and fuel economy.
  • Cleans direct and indirect fuel injectors, intake valves and ports, piston tops, cylinder heads, and combustion chamber.
Check Stock

AA Performance Products 92 x 69mm 1835cc Piston & Cylinder Kit, Fits VW

  • This is a new set of 92mm VW Aircooled Type 1 Pistons and cylinders. This kit does require machine work on the cylinder heads and case.
  • Fits 90.5/92 Case, 90.5/92 Heads. The 39.8mm Compression Height will work with small stroked cranks 69, 74, and 76.
  • Kit includes: 4 Cylinders, 4 Pistons, 1 set of Piston Rings and 4 Pins and clips..
Check Stock