Reviews Engine Crank

VIVOHOME Heavy Duty Steel 2 Ton / 4000lbs Engine Hoist Load Leveler Shop Crane Cherry Picker with 2 Chains

  • MECHANIC'S BEST FRIEND - The VIVOHOME Heavy-Duty Hoist Load Leveler allows for easy engine handling and positioning.
  • It attaches between the engine block and the crane to let you lift the engine safely and easily.
  • With this handy tool, reinsertion of motor and transmission will also be perfectly balanced.
  • HEAVY-DUTY MATERIALS - Made with high-quality steel that is highly resistant to wear and corrosion, it ensures safe operation and prolonged service life.
  • The maximum lifting capacity of 4000 lbs. provides you with enough power to lift a variety of engines or other heavy items.
  • EXCELLENT SUPPORT CHAINS - Designed to easily attach to the engine, 2 supporting chains offer added strength and allow for accommodating engines of different sizes.
  • They help share the heavy load and keep the engine steady so that it won’t sway or fall off during the process.
  • CONVENIENT CRANK HANDLE - It comes with a fine-tuning crank handle that can be operated by one hand to adjust the horizontal tilt, making it easier to carry off-center loads.
  • It mainly helps steady the engine and tilt it to slide in the transmission and engine mount.
  • MULTIPLE APPLICATIONS - This hoist load leveler can be applied to engine hoists, shop cranes and cherry pickers.
Check Stock

Crankshaft Pulley Removal Install Tool Crankshaft Damper Remover Puller Compatible with Jaguar Land Rover 3.0 V6, 5.0 V8 303-1437 303-1438 303-1439 303-1440 303-1441

  • Applicable Engine: 3.0Lt AJ-126/306PS, 5.0Lt AJ133/508PS, 508PN, OEM Equivalent 303-1437.
  • Applicable Vehicle Model: fit Jaguar F-Type, XE, XF, XFR, XJ, XJR, XK8, XKR 2009 to 2018.
  • fit Land Rover Discovery 4/Discovery, fit Range Rover, fit Range Rover Sport 2009 to 2018.
  • Remove and Install Crank Pulley: Set of tools required for the removal of the front crankshaft pulley (Crankshaft Vibration Damper) fitted to the Jaguar and Land Rover 3.0lt v6 and 5.0lt V8 petrol engines.It is a must have for removing and installing for land rover jag crank pulley.
  • Worked Perfectly: The crankshaft pulleys used on these engines are tightened to 200 Nm 270 degrees so are very tight to undo and must be held by a substantial holding tool which the kit provides. Also included in the kit are the puller component’s required to remove the pulley without damage.
  • Quality Gurante: Crankshaft crank puller pulley set made of high quality heavy steel, high hardness, strong and durable.All tools have undergone rigorous engine testing, to ensure that thecrankshaft pulley t....
Check Stock

Zeda 80 Performance Bicycle Engine Kit with Dio Reed Valve & OKO Carb - Silver - Motorized Bike (36 Tooth)

  • Take your 2-stroke motorized biking to the next level with this complete Dio performance kit including the engine, mounting hardware, and stock exhaust pipe.
  • The included Dio reed valve, OKO carb, K&N style air filter (or optional velocity stack), and modified Dio cylinder round out this performance package that will yield tons of torque and increased speed.
  • For even more power and performance it can also be paired with our Zeda88 performance pipe (select from the drop down above).
  • or pick up a Dio Upgrade Kit for just $99.
  • Kit includes: 2.95 HP 2-stroke engine, modified Dio cylinder with piston, 21mm OKO flat side carburetor, 6 flap Dio reed valve, K&N style mesh air filter.
  • Performance parts: stainless steel allen bolts, enhanced balanced crank, upgraded bearings + 60% thicker crank case around bearings, stuffed crankcase, large intake port (40mm bolt hole width), round exhaust port 40mm crank stroke (more powerful, efficient, and reliable), type B piston (high wrist pin), long rod (89mm).
Check Stock

DONSP1986 2”Cup Wide Pedal Crank Kit One-Piece Crank for 2- Stroke Motor,Gas Motorized Bicycle 48cc/66cc/80cc

  • Compatible with 2" cup/2" bottom bracket of bike frame.
  • This item can't work with pulling start 2 storke engine kit..
  • Wide Pedal Crank Kit, One-Piece Crank 44T sprocket, fit on well on normal 26 inch bicycle.
  • Two styles of sprockets are delivered at random . This product Comes with 12months Warranty. Any questions,please contact us firstly !We can help you....
Check Stock

Zeda 100 Complete 80cc/100cc Bicycle Engine Kit - Firestorm Edition 36 Tooth

  • New & Exclusive Limited Supply – High Performance Cylinder Head, Carb, CDI, Crank, Bearings & More.
  • Firestorm Zeda100 3+ HP Engine w/ single head/50mm Bore/40mm Stroke/US displacement 78.6cc.
  • Increased weight capacity, Low operating temps, Easy starting, Sustained power output across rpms.
  • Anti-corrosion coat/Angled LD/Z8C spark plug/SS allen bolts/60% Thicker crank case for bearings.
  • 40mm Intake/40mm Round Exhaust/more powerful & reliable crank stroke/Type B piston 89mm Long rod.
Check Stock

The Aviators

  • Engine leveler has a 3/4 ton (1,500 lb) load capacity and is made from rugged, top quality structural steel.
  • It's ideal for garage, workshop, and agricultural jobs.
  • Fully adjustable, with 3 position chain mount holes to accommodate various engine configurations.
  • Features (4) 14" length chains, each equipped with an L-bracket assembly.
  • Simply attach the chains to the engine and use the crank handle for quick and ease adjustments with the threaded shaft, which balances the load with ease.
Check Stock

Wild Badger Power 2 in 1 Multi Trimmer with Brush Cutter, Attachments Compatible, 26CC Full Crank 2-Cycle, Rubber Vibration Dampened Handle and Shoulder Strap

  • 【2 in 1 Multi-function】The Wild Badger Power 26CC trimmer Multi-Tool has a grass trimmer attachment for detail work along orders and a brush cutter blade for heavier grasses and brush clearing, It also includes a harness to relieve the strain on your arms and improve stability..
  • 【Powerful engine】 The grass trimmer adopt commercial grade 26cc full crank 2-cycle engine , engine life tested for 100+ hours and has double the life versus half crank engines. The full crank design delivers a fast start and smooth operation reducing emissions, increasing fuel efficiency and delivering longer life..
  • 【Easy to start and Comfortable operation】Tool free air filter cover for better assembly, maintain, and operation. Easy starter, start within 5 times pulling starter. The transmission is supported by a vented aluminum casing which greatly reduces vibration allowing you to work in comfort until the job is done. Economic comfort rubber vibration dampened handle. P-handle with foam for comfortable use..
  • 【Attachments compatible】 It easily connects to badger or other brand attachments and locks them in tight, only need change attachments that you can get another function tool, save money, save space..
  • 【Reliable customer service】 If you encounter any qual....
Check Stock

Engine Crankshaft Turning Socket Tool, Aluminum, 1/2" Drive, Compatible with Chevy BBC Big Block 366 396 402 427 454

  • FITMENT - This BBC Crankshaft Socket Fits Chevy Cars with The Big Block Chevy Engines as below: 366 (6.0 L) 1960-1990,396 (6.5 L) 1965-1972, 402 (6.6 L) 1970-1972,427 (7.0 L) 1962-1963,454 (7.4 L) 1970-1976.
  • BENEFITS - Crankshaft Turning Sockets are a necessity for engine building. This socket slips onto the crank and will make turning your crank a snap,besides non- damaging aluminum tool will rotate the crankshaft in the correct way.
  • FEATURES - 1/2 Breaker Bar or Drive Ratchet for Rotating the Engine, fits 1. 610 ID crankshaft port with 3/16" keyway.
  • QUALITY - Corrosion-Resistant & Machined From 6061 Billet Aluminum.
  • INCLUDES - (1)BBC Crankshaft Socket Tool.
Check Stock

Darton 300-018 Dry Cylinder Sleeve Kit for H22 & H23

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 3/4” to 1” diameter. It comes with 1.77"" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

Auto Express Honda GX390 13 HP Short Block Engine Crank Shaft Camshaft Crankcase New

  • Includes: Engine Block with Piston and rings, Piston Pin, Connecting Rod, Crankshaft, Crank Seals, Crankcase Cover, Camshaft Balancer, Shaft, Low Oil Sensor, Governor, Oil Dipstick/Fill Cap.
Check Stock

SPI Fix Kit 2010-2012 fits Polaris 800 Sleds 85mm Pistons Bearings & Fix Kit

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 1"-3/4"x1/4"-3/16" inch diameter. It comes with 2.01" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

ACL Bearing 8B1580HX-STD Engine Standard Size High Performance Rod Bearing Set (BMW M3 (E90) S65 V8), 1 Pack

  • ACL's main bearings are made of a softer metal so that you don't wear out your crank or engine block.
  • Additionally a thin layer of oil lubricates the connection between the bearings and the crank allowing the crank to "float" and reduce wear.
  • Proper support via main bearings is crucial to prevent oscillations and wear that can damage the crankshaft and other components as the motor moves further out of balance.
Check Stock

Wiseco 74.0Mm Black Anodized Piston Ring Compressor Sleeve By Jm Auto Racing (Rcs07400)

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 7/8" to 1" diameter. It comes with 2.01" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock