Reviews Engine Block Heater Cord

Silicone Oil Pan Heater Pad 4x5', Self-Adhesive Engine Block Heater Pad- 150W 120V, Transmission Fluid Reservoir and Hydraulic Fluid Heater Pad with Thermal Protector 68' Long Power Cord

  • [PREVENT ENGINE WEAR ON COLD WINTER STARTS]- When your car driving in a low temperature environment, it is difficult to start. Using the 120V /150W Silicone Heater Pad, Oil Pan Heater Pad can throw off a lot of heat and Warm up Quick to 194 degrees Fahrenheit (90 C) and easy to start by improving the flow of fluids in cold winter, which can limit cold startup motor bearing and ring wear ..
  • [PREMIUM MATERIAL]- 150W/120V Silicone Electric Heating Pads made of hard-wearing silicone, Car Battery Heater Pad has the functions of fast heat generation, good thermal efficiency, pressure resistance, abrasion resistance, and water resistance, which has a long useful life. You can rest assured to buy Heating Pad in this cold winter..
  • [GOOD ADHESION AND EASY TO INSTALL]- Installation is simple with the self -adhesive. Clean the surface of the oil pan thoroughly and keep the power cord away from any hot exhaust surfaces or moving parts. Tear off the 4 x 5”(10.2cm x 12.7cm) paper back of the Car Engine heating pad, stick the pad to a clean surface, Sticks amazingly well. and then plug the power cord into the socket..
  • [SAFETY WARMING]- There is an automatic thermal protector inside the Oil Pan Heater Pad, which keeps engine block heater pad’s temperature at a cer....
Check Stock

Silicone Heating Pad, 2 x 5inch Car Universal Oil Pan Heater 50W Battery Heater Pad 120V Engine Block Heater Pad with 68Inch Long Power Cord

  • Heating Technique: In the cold winter, use our 120V 50W silicone heating pad to turn on the power before starting the engine, and continue to evenly heat the metal surface to make the oil reach the perfect temperature.
  • Improve Engine Oil Flow: Continue to transfer heat to reduce the consistency of the oil, keep the engine oil as a thin liquid, help you better lubricate the engine, reduce wear, and extend the service life of the engine and gearbox.
  • High-Quality Material: Our oil pan heater is made of wear-resistant silicone, waterproof, oil-proof, and low-temperature resistant, the entire surface is heated evenly, strong adhesive makes it fixed on the metal surface. Please note: it is very hot after heating, please use a thermostat (not included) to adjust the temperature.
  • Simple Operation: Clean the metal surface, tear off the backing of the engine heating pad and stick it firmly to the outside of the oil pan or other metal surface, insert the 2-core power cord into the socket, and the heating starts immediately, after 10-15 minutes, unplug the power cord and start the vehicle to resume normal operation.
  • Adaptability: The size of the engine block heater is 2 in x 5 in, and the power cord is about 68 inches. It is only suitable for automotive parts with m....
Check Stock

Kat's Frost Plug Engine Heater - 1-3/4\ NPT (44.5 MM) 600 Watt w/ 120 Volt Farmer Bob's Parts K7FR

  • Freeze Plug Heater, also referred to as a block heater or frost plug heater is the most reliable and efficient way to pre-heat your engine. Operates by being directly submerged into coolant and heating the block. Most efficient and reliable way to pre-heat engine block..
  • 10609, 815705, GE24, K7FR, K962705, 11609.
Check Stock

2-Pack Silicone Car Heater Pad Engine Oil Heater Pad - 4' x 5' Self-Adhesive Oil Pan Heater Pad Battery Heater Pad Engine Block Heater Pad with Thermal Protector 68' Long Power Cord 150W 120V

  • In the cold winter, use these two engine heater pads before starting the car to bring the oil to the right temperature and thus reduce oil consistency, which will lubricate the engine better and reduce its wear..
  • Peel off the paper backing from the oil pan heater pad and stick the pad to a clean metal surface, then plug the power cord into the outlet. Once attached, the pad will be less likely to be removed..
  • Composed of hard-wearing silicone, these two engine block heater pads are absolutely waterproof, oil-proof, low-temperature resistant and durable enough to serve you for a long time..
  • These 150W/120V oil pan heater pads have a built-in automatic thermal protector that keeps the heating temperature at a constant 90°C, effectively preventing safety hazards caused by high temperatures..
  • 【Warm Tips】 Our engine heater pads are only suitable for automotive parts with metal surfaces, such as oil pan, reservoir and transmission pan. Because of the importance of safety and product life, we do not recommend other uses..
Check Stock

Learn Numbers, Shapes and Colors at the Amusement Park with Max the Glow Train

  • Heated Engine: Help you start car quickly. In cold winter, use silicone heating pad to heat the engine and transmission before starting the car, reduce the consistency of the oil to keep the oil as a thin liquid, thus better lubricating the engine and reducing wear and tear, extending the life of the engine and transmission and starting the car quickly..
  • Replaces Block Heaters: Magnets do not work on aluminum oil pan, which is what most cars have. Oil pan heaters are suitable for both cast iron and aluminum engine oil pans.Economical and convenient solution..
  • High Quality Material: Made of high quality silicone, waterproof and oil-proof, the waterproof design of the silicone and power cord connection reduces the risk of short circuit. The hotter the upgraded silicone is the stronger the adhesion. Fast heating, then constant at 194 ℉ / 90℃, prevent the safety hazards caused by high temperature..
  • Easy to Install: Clean and dry the flat surface of the device, peel off the paper backing and apply the oil pan heater, using magnets/adhesives can extend the adhesion time (magnets and adhesives not included).
Check Stock

Zerostart 3400072 Silicone Pad Heater Engine Oil, Transmission Fluid, Reservoir and Hydraulic Fluid Heater, 2¼\ x 4\ | 120 Volts | 125 Watts

  • Quickly Warm Your Engine - In the cold winter days, use silicone car engine heater pad will fast heat up your engine oil pan ensure that your engine and transmission fluid circulates efficiently before starting.
  • Heat Up Oil Flow - Self-adhesive oil pan heater pad battery heater pad engine block heater pad will improve oil flow, transmits heat to keep engine oil as a thin fluid, giving you instant lubrication when starting your engine, reduces engine wear and tear.
  • Silicone Covered & Thermostatically Controlled - Silicone coating resists oil, acid, and water, and adds strength and longevity to these oil pan, reservoir and transmission pan.
  • heat for 10 to 15 minutes that keeps the heating temperature at a constant 194 F /90°C, increases engine longevity and extends transmission life.
  • Built-In Overheat Protector - 4 x 5 inch/10.2 x 12.7cm car engine heater pad is rated at 120 volts and produces up to 150 watts, oil pan heater pads built-in automatic thermal protector, effectively preventing safety hazards caused by high temperatures.
  • Easy Set Up - Easy to install, as car engine heater pad requires little mechanical ability, before use, please wipe clean the dust on the surface to keep it dry, and peel off the paper backing from the oil pan heater pad and a....
Check Stock

Car Engine Heater Pad, 4 x 5 inch Car Universal Engine Heating Oil Pan Heater Pad 120V Silicone Electric Battery Heater Pad 150W Engine Block Heater Pad w/Overheat Protector 68\ Long Power Cord

  • Quickly Warm Your Engine - In the cold winter days, use silicone car engine heater pad will fast heat up your engine oil pan ensure that your engine and transmission fluid circulates efficiently before starting.
  • Heat Up Oil Flow - Self-adhesive oil pan heater pad battery heater pad engine block heater pad will improve oil flow, transmits heat to keep engine oil as a thin fluid, giving you instant lubrication when starting your engine, reduces engine wear and tear.
  • Silicone Covered & Thermostatically Controlled - Silicone coating resists oil, acid, and water, and adds strength and longevity to these oil pan, reservoir and transmission pan.
  • heat for 10 to 15 minutes that keeps the heating temperature at a constant 194 F /90°C, increases engine longevity and extends transmission life.
  • Built-In Overheat Protector - 4 x 5 inch/10.2 x 12.7cm car engine heater pad is rated at 120 volts and produces up to 150 watts, oil pan heater pads built-in automatic thermal protector, effectively preventing safety hazards caused by high temperatures.
  • Easy Set Up - Easy to install, as car engine heater pad requires little mechanical ability, before use, please wipe clean the dust on the surface to keep it dry, and peel off the paper backing from the oil pan heater pad and a....
Check Stock

ACDelco 91002 Professional Power Clean Cooling System Flush Tool Kit

  • Equipped with a pulsating gun assembly with a pre-set regulator for accuracy.
  • Hinders water line backflow to lessen water pump damage.
  • Large rubber tip for radiator necks and direct flushing of the engine block.
  • Small rubber tip on the whip hose for direct access to the heater core tube stubs.
  • 5?8 in and 3?4 in heater hose barbs for flushing heater cores or engine blocks.
Check Stock

COMPLETE & UNABRIDGED 1984 CORVETTE FACTORY REPAIR SHOP & SERVICE MANUAL - INCLUDES; 1984 Hatchback, '84 Convertible,

  • 【Warm Up Your Engine Quickly】In cold winters, use Silicone Heater Pad for 10-15 minutes to ensure your engine and transmission fluid circulates efficiently before starting. For those cold mornings, the device quickly heats the oil to the right temperature..
  • 【Improve Oil Flow】You will get 2 Car Engine Heater Pad. When plugged in, Engine Warmer will transfer heat to keep engine oil a thin fluid, giving you instant lubrication when you start the engine, this reduces wear and extends the life of the engine & transmission..
  • 【Thermostatic Control】Car Battery Heater Pad rated power 120 volts, 150 watts, built-in automatic thermal protector keeps the heating temperature at a constant 194°F/90°C, effectively preventing safety hazards caused by high temperature..
  • 【Built to Last】Made of wear-resistant silicone. Oil Pan Heater Pads are waterproof, oil-proof, acid-proof and low-temperature resistant. Only designed for use on automotive metal surfaces such as engine oil pan, fuel tank, reservoir, transmission, etc. Not for personal use or on plastic..
Check Stock

ABN Silicone Heater Pad Car Battery Heater Pad Engine Block Heater Pad Oil Pan Heater Pad, 4x5 Inch – 120V 250 Watt

  • KEEP YOUR ENGINE WARM: On a cold winter day, use the ABN 250-Watt 4x5 Inch Silicone Rubber Heater Battery Heating Pad 10 or 15 minutes prior to start up for perfect engine oil temperature.
  • Device heats the oil quickly up to 194 degrees Fahrenheit (90 C) for those cold start mornings.
  • IMPROVE OIL FLOW: Transmits heat (to a built-in maximum temperature of 194 F / 90 C) to keep engine oil as a thin fluid, giving you instant lubrication when starting your engine.
  • Increases engine longevity and extends transmission life.
  • EASY TO INSTALL: Clean application surface, peel off paper backing to adhesively attach 4-inch x 5-inch (10.2cm x 12.7cm) pad to outside of clean oil pan or other metal surface, then plug the 5.75-foot (1.8m) 2-prong power cord into any wall outlet for instant warming.
  • Once applied, the stick on oil pan heater remains permanently installed on any metal surface (seal edges for longer adherence.
  • BUILT TO LAST: Flexible heating pad is rated at 120 Volts and 250 Watts.
  • Constructed with silicone coat covering for oil resistance, acid resistance, and added strength and longevity.
  • Power cord stays attached : not removable.
  • FOR AUTO WARMING: 250-watt car engine heater pad designed to heat fluids with any ....
Check Stock

Vehicle Maintenance Log Book: Car Repair Journal / Automotive Service Record Book / Oil Change Logbook / Auto Expense Diary / Engine Autolog / Automobile, Truck Or Motorcycle Owner Gift Notebook

  • 【Warm Up Your Engine Quickly】In cold winters, use Silicone Heater Pad for 10-15 minutes to ensure your engine and transmission fluid circulates efficiently before starting. For those cold mornings, the device quickly heats the oil to the right temperature..
  • 【Improve Oil Flow】You will get 2 Car Engine Heater Pad. When plugged in, Engine Warmer will transfer heat to keep engine oil a thin fluid, giving you instant lubrication when you start the engine, this reduces wear and extends the life of the engine & transmission..
  • 【Thermostatic Control】Car Battery Heater Pad rated power 120 volts, 150 watts, built-in automatic thermal protector keeps the heating temperature at a constant 194°F/90°C, effectively preventing safety hazards caused by high temperature..
  • 【Built to Last】Made of wear-resistant silicone. Oil Pan Heater Pads are waterproof, oil-proof, acid-proof and low-temperature resistant. Only designed for use on automotive metal surfaces such as engine oil pan, fuel tank, reservoir, transmission, etc. Not for personal use or on plastic..
Check Stock

MICTUNING 13Amp 125V AC Port Plug with 16" Integrated Heavy Duty Extension Cord and Water-resistant Cap - Black

  • ★POWERFUL AC PORT PLUG – Use 3x16AWG (1.31mm2) heavy duty wires, rated at 13-amps, 125-volts for peak performance, easily supplying power for your device.
  • ★2018 UPGRADED VERSION – Re-design of power cord outlet, located in the center of the back, makes the plug ideal for battery charger, engine block heater, home appliances, etc.
  • ★WEATHERPROOF – The snap-fit watertight cap well protects the plug against all the snow, ice, freezing rain and even works well in Western Colorado winters.
  • ★FLEXIBLE CONNECTION – 16″ integrated extension cord offers plenty of flexibility for your application, directly connecting the cord to the existing power source.
  • ★EASY INSTALLATION – No extra hand wiring nor cable modification required, just need a 2-inch drilling hole, simply flush mounted with 3 screws for a decent OEM look. WHAT YOU’LL GET:2 Year MICTUNING WARRANTY and lifetime best customer service, 1x AC Power Port Plug, 3x Screws..
Check Stock

BMI Engine Block Heater Compatible with: Kubota Tractor M B & L Series 3, 4 & 5 cyl Engines

  • Also referred to as Freeze Plug heaters, or simply Block Heaters. The most reliable and efficient way to pre-heat your engine. Operates by being directly submerged into coolant and heating the block. Requires mechanical ability to install..
Check Stock