Reviews End Fitting Insulator
Electric Fence Insulator 20 PCS Black Ring Insulator Wood Post Insulator Screw-in Insulators Fence Ring for Agricultural Fencing Wood Post Insulators & Animal Husbandry Electronic
- 【Packing】: 30 PCS black electric fence insulator, made of metal and plastic material,strong and study construction..
- 【Size】: Screw-in Insulators size: Total length = 3.7"/95 mm, Self-tapping Screws Length = 1.8"/45 mm. the top mid ring approx 0.38 inch / 9.5 mm..
- 【High Quality Material】The Black Ring Insulator Made of metal and plastic material, high quality. High strength, good insulation, non-deformation, sun protection and rain. friendly for completely to people, pets and wildlife..
- 【Easy to install】: Self-tapping design can easily screw into timber fence by hand, no need tools any.easy to install for quick screw-in and labor-saving.if you not understand, please see to picture with up..
- 【Widely Use】Electric fence ring insulators for wire, multi-line, rope and electric fence tape, can be used as start, end, corner or line insulator.This electric fence insulators angled slot can hold electrified wire without energy loss. Electric fence ring insulators suitable for 8 gauge through 30 gauge high-tensile steel wires..
Check StockPintech Percussion LR-78 Electronic Drum Accessory
- 7/8in. L-Rod (large end fits directly in MCM or L-Rod rack clamp).
- L-Rod with large rubber vibration reducing insulator helps to reduce cross talk..
Check StockDukes and Ladders: A LitRPG/Gamelit Adventure (The Good Guys Book 5)
- The MFJ-16E01 is an extra strong fiberglass, 450 Ohm ladder line end insulator..
- It has a double weave ladder line for stress relief..
- It is built in with an SO-239 connector..
Check StockWriting Straight with Crooked Lines: A Memoir
- The MFJ-16E01 is an extra strong fiberglass, 450 Ohm ladder line end insulator..
- It has a double weave ladder line for stress relief..
- It is built in with an SO-239 connector..
Check StockEVIL ENERGY 6AN PTFE Hose End Fitting 90 Degree Black for PTFE Hose Only
- Please Attention that the 6AN PTFE hose end can be work with PTFE fuel line ONLY..
- Thread Size of 6AN PTFE Fitting is 9/16-18UNF and work with PTFE fuel line(Hose ID: 0.31 inch OD: 0.43-0.47 inch)..
- The PTFE hose end is reusable, just replace a new ferrule if you reinstall the fitting..
- EVIL ENERGY Provide plently kind of fuel fittings, Swivel, push-on lock, PTFE hose end and other fitting adapters..
- Warrany: EVIL ENERGY provide PTFE hose end 6-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock7004R Tuff Tainer - 16 Compartments (Includes (9) Zerust dividers)
- INDOOR / OUTDOOR RESISTANCE - Our tuff tying twine is perfect for a wide range of indoor and outdoor applications. Polypropylene is almost 100% waterproof and floats on water, making it useful for most marine and nautical applications. The synthetic fibers feature high-end resistance to temperature, oils, alkalis, and gasoline. Electricians choose polypropylene because it acts as a lightweight and flexible insulator..
Check StockWhitecap Industries G-3460SSC Stainless Steel Gas Spring - 12\ to 20\
- 【Material】 - M8 thread is made of PA66A5,simple design, good quality, durable..
- 【Feature】 - Gas spring strut joint connector end fitting..
- 【Advantage】 - Gas spring end fitting connector can be used over and over again,easy removal..
- 【Application】 - Gas spring end fitting connector is a good replacement of gas springs ball strut, and the gas springs are ideal motion control devices for lifting, holding, counterbalancing, and providing support for applications such as horizontally hinged doors, lids, hoods and canopies..
Check StockMFJ-16E01 Extra Strong Fiberglass 450 Ohm Ladder Line End Insulator with SO-239 Connector
- The MFJ-16E01 is an extra strong fiberglass, 450 Ohm ladder line end insulator..
- It has a double weave ladder line for stress relief..
- It is built in with an SO-239 connector..
Check StockEVIL ENERGY Fuel Filter Regulator 58 PSI Kit for LS Swap EFI Conversion
- ... Installation: fuel filter regulator kit for LS Swap EFI Conversion can be installed anywhere between the tank and the engine, although it is usually installed in the engine compartment to make it easy to obtain even more uniform fuel pressure. Mounting bracket and rubber insulator are included to make installation a breeze..
- Package Included: 1pcs fuel filter/regulator, 1pcs 3/8'' EFI push on lock fitting for inlet, 1pcs 5/16'' EFI push on lock fitting for return, 1pcs 6AN male to 3/8 male push on EFI fitting for outlet..
Check StockKegerator Tower Insulator for Beer Tower - Neoprene Design - Perfect Fit for Kegerator Tap Tower - Easy to Use Beer Tower Cooler Accessory (3.0\ Diameter Beer Tower)
- MAINTAINS ICY COLD BEER TOWERS: Upgrade your beer dispenser with this simple to use Neoprene kegerator tower insulation sleeve. Ensure that every pour from your draft beer tower comes out icy cold. Even the first!.
- END FOAM NOW: Maintain a constant temperature throughout your kegerator system with a Keg Tower Insulator. Beer warms rapidly as it travels through a poorly insulated beer tower. Our product reduces foamy pours and wasted beer..
- SAVE ELECTRICITY WITH LITTLE EFFORT: The added insulation of a Keg Tower Insulator will reduce kegerator energy consumption. Unlike kegerator tower cooler chiller fans, our product takes only seconds to install..
- MINIMIZE CONDENSATION: Kegerator towers sweat. Condensation buildup is a sign of poor insulation and will lead to corrosion and rust. Increase the lifetime of your kegerator with a beer tower cover..
- HIGH QUALITY MATERIAL AND BUILD: Crafted from high quality Neoprene with heavy-duty double stitching. Easy to clean and guaranteed to last. 3” Diameter and 11.5” Height. Ideal for double tap beer towers..
Check StockQMINOX 2 Inch × 1.5 Inch Sanitary Fitting End Cap Reducer Stainless Steel 304 Sanitary Concentric Reducer Tri Clamp Clover
- End Cap Reducer Ferrule Size 64mm = 2 Inch Tri Clamp.
- End Cap Reducer Ferrule Size 50.5mm = 1.5 Inch Tri Clamp.
- Concentric End Cap Reducer Fitting to Connect 2 Pipes of Different Diameters That are Along The Same Pipe Axis.
- Sanitary Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
- Stainless Steel 304 Sanitary Fitting for Resistance to Corrosion and High Temperatures.
Check StockOatey 43551 Replacement Ring, for Use with 4 in Closet Flanges, 3-Inch or 4-Inch, Brass
- 3 countersunk holes and 3 closet bolt slots for secure attachment to the floor.
- 3-Inch Spigot Closet Flange fits inside the hub end of 3-Inch Schedule 40 DWV fitting.
- 4-Inch Spigot Closet Flange fits inside the hub end of 4-Inch Schedule 40 DWV fitting.
- Solvent weld into fitting-short throat length is perfect for use in tight spaces and where the fitting is close to the sub-floor.
- Four mounting slots for proper fit and alignment of closet bolts to the toilet.
Check StockPower Steering Hose Kit for 1982-88 T-Bird Steering Rack to GM Pump
- Adapts an aftermarket 1982-1988 T-Bird/Cougar type rack to a GM Type 1 Saginaw pump.
- Pressure line has a 5/8"-18 male inverted flare fitting at the pump end.
- Adapter for the GM pump, to allow it to work with both metric O-ring and standard inverted flare style threads on the power steering pump fitting..
- Features a -6AN to an 9/16"-18 O-ring fitting on the rack end.
Check Stock