Reviews Enamel Primer

TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood (Gray, Quart)

  • ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
  • for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition.
  • COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
  • apply a second coat only if a higher build is needed.
  • to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer.
  • EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
  • boat primer is chromate-free and lead-free.
  • DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
  • marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint.
  • AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
  • do not apply Topside Primer thicker than recommended or it may not cure properly.
Check Stock

Majic Paints 8-20986-8 Tractor & Implement Spray Enamel Paint, Aerosol, Gray Primer

  • Use on equipment, implements, tools, etc. where a hard enamel finish is desired.
  • Special heavy-duty alkyd formula with excellent adhesion.
  • Authorized by USDA for use in federally inspected meat and poultry plants.
  • Colors match Tractor Truck & Implement Enamel in gallon and quart containers.
Check Stock

Louie's Backyard Cookbook: Irrisistible Island Dishes and the Best Ocean View in Key West (Roadfood Cookbook)

  • ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
  • for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition.
  • COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
  • apply a second coat only if a higher build is needed.
  • to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer.
  • EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
  • boat primer is chromate-free and lead-free.
  • DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
  • marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint.
  • AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
  • do not apply Topside Primer thicker than recommended or it may not cure properly.
Check Stock

KILZ Restoration Primer, Interior, 5 Gallon

  • ... ADVANCED FORMULA: The innovative modified acrylic epoxy formula provides superior adhesion and the performance of oil-based and shellac primers with the easy clean-up, low odor and low VOC of water-based. This formula also dries hard and sands easily which makes for a great enamel undercoater..
  • MULTIPLE SURFACES: Use on most interior surfaces including drywall, wood, plaster, masonry, brick, painted metal, ceramic tile, glass and most other glossy surfaces. Surfaces should be free of dust, grease, chalk, rust and peeling paint prior to application. Use as a subcoat for flooring and carpets to block pet odors. Works with oil, alkyd and water-based paints..
  • SUPERIOR COVERAGE: This 5-gallon pail of KILZ RESTORATION interior latex primer covers approximately 1,500-2,000 square feet per gallon. Dries to touch in 30 minutes and can be recoated or topcoated after one hour..
  • KILZ primers have been trusted by pros for nearly 50 years! Famous for providing high quality primer products that provide solutions to a wide variety of painting problems, KILZ is consistently ranked as one of the most....
Check Stock

TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood White Gallon

  • ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
  • COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
  • apply a second coat only if a higher build is needed.
  • EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
  • DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
  • marine paint primer is easy to sand, then just wipe clean and....
  • AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
Check Stock

TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood White Quart

  • ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
  • COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
  • apply a second coat only if a higher build is needed.
  • EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
  • DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
  • marine paint primer is easy to sand, then just wipe clean and....
  • AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
Check Stock

KILZ Restoration Primer, Interior, 1 Gallon

  • ...h latex or oil-based paint. Use on properly prepared interior surfaces, such as: brick, ceramic tile, drywall, glass, masonry, painted metal, plaster, stucco and wood. Performance of oil and shellac / Blocks tough stains (heavy water, grease and typical interior stains) and odors. Dries hard, sands easily - a great enamel undercoat.
  • Use on: drywall, woodwork, plaster, masonry, brick, painted metal, ceramic tile, glass and most other glossy surfaces. Use on properly prepared surfaces free of dust, grease, chalk, rust and peeling paint. Mix well before using. Apply with brush, roller or airless sprayer..
  • This is a 1-gallon can of KILZ Restoration Latex Primer, Sealer, and Stain blocker for interior surfaces in white. Covers approximately 300-400 square feet per gallon. KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend Rankings..
  • Performance of oil and shellac / Blocks tough stains (heavy water, grease and typical interior stains) and odors.
  • Dries hard, sands easily - a great enamel undercoat.
  • Use on: drywall, woodwork, plaster, masonry, brick, painted metal, ceramic tile, glass and most other glossy surfaces.
Check Stock

INSL-X SXA11009A-04 Stix Acrylic Waterborne Bonding Primer, 1 Quart, White

  • Premium-quality, acrylic-urethane bonding primer-sealer with unparalleled adhesion to the most challenging surfaces, including glossy tile, PVC, vinyl, plastic, glass, glazed block, glossy paint, pre-coated siding, fiberglass, and galvanized metals..
  • Bonding primer for drywall, plaster, ceiling, acoustical tile, wood trim and doors, Formica, ceramic tiles, glossy surfaces, PVC plastic, masonry walls, wood, trim, shutters, masonry, stucco, concrete, cement block, galvanized metal, aluminum, and other challenging surfaces..
  • Bonds to "hard-to-coat" surfaces and can be top coated with almost any product..
  • Fully cures in temperatures as low as 35 °F..
  • 75 - 100 square foot coverage for interior or exterior use.
  • Low VOC and easy soap and water cleanup..
  • Excellent enamel holdout, providing a great base for an even topcoat finish..
  • Before painting, review the INSL-X STIX label for proper preparation and application tips..
Check Stock

DAP

  • For wet, oil or dry sanding primer, sealer, varnish, lacquer, enamel and other top.
  • Tufback Durite sheets - contractor grade.
Check Stock

Dental COLTENE SwissTEC SL Bond Adhesive 5ml

  • One bottle of self-etching primer for effective one-step conditioning of cut enamel and dentin without rinsing.
Check Stock

Fannie May Harry London Gourmet Chocolates S'mores Snack Mix Crunchy Cereal & Fluffy Chocolate-Covered Marshmallows - 18 oz.

  • Premium-quality, acrylic-urethane bonding primer-sealer with unparalleled adhesion to the most challenging surfaces, including glossy tile, PVC, vinyl, plastic, glass, glazed block, glossy paint, pre-coated siding, fiberglass, and galvanized metals..
  • Bonding primer for drywall, plaster, ceiling, acoustical tile, wood trim and doors, Formica, ceramic tiles, glossy surfaces, PVC plastic, masonry walls, wood, trim, shutters, masonry, stucco, concrete, cement block, galvanized metal, aluminum, and other challenging surfaces..
  • Bonds to "hard-to-coat" surfaces and can be top coated with almost any product..
  • Fully cures in temperatures as low as 35 °F..
  • Coverage: 300 - 400 square feet per gallon..
  • Low VOC and easy soap and water cleanup..
  • Excellent enamel holdout, providing a great base for an even topcoat finish..
  • Before painting, review the INSL-X STIX label for proper preparation and application tips..
Check Stock

KILZ Original Primer 13OZ CASE of 12

  • Cover stain, QT, Oil based stain killer primer/sealer.
  • High-hiding formula blocks most stains and helps seal water, smoke and nicotine stains.
  • Sticks to interior and exterior surfaces and sands easily.
  • Great for new construction, remodeling or repainting work and priming small projects.
  • Dries-quickly on interior surfaces and helps provide enamel undercoating performance.
  • Use on exterior surfaces to help deliver full penetration and flexibility on surfaces.
Check Stock

Zinsser Cover Stain Classic Oil 100

  • Adhesion with Flexibility: Zinsser Cover Stain Classic Oil 100 is a low VOC, oil-based specialty primer that combines excellent adhesion with flexibility.
  • Stain Blocking Power: It features stain blocking power for interior and exterior surfaces damaged by fire, water, and smoke.
  • Ideal For: Cover Stain Classic Oil 100 has excellent enamel holdout which makes it ideal for bare wood.
  • Operating Temperature: For best results apply only when air, material, and surface temperatures are between 40-degree and 90-degree-F (4-degree and 32-degree-C).
Check Stock