Reviews Embedded Development Board

Ingcool Raspberry Pi Pico Microcontroller Board with Pre-soldered Header Low-Cost, High-Performance,Based on RP2040 Chip, Dual-core Arm Cortex M0+ Processor,Flexible Clock Running up to 133 MHz

  • Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces..
  • Raspberry Pi Pico Board incorporates Raspberry Pi's own RP2040 microcontroller chip, with dual-core Arm Cortex M0+ processor running up to 133 MHz, embedded 264KB of SRAM and 2MB of on-board Flash memory, as well as 26x multi-function GPIO pins..
  • For software development, either Raspberry Pi's C/C++ SDK, or the MicroPython is available..
  • There're also complete development resources and tutorials to help you get started easily, and integrate it into end products quickly..
  • This is a Raspberry Pi Pico with Pre-soldered Header,it is easier to connect with another items..
Check Stock

Seeed Studio LoRa-E5 Development Kit - Based on LoRa-E5 STM32WLE5JC, LoRaWAN Protocol and Worldwide Frequency Supported.

  • ✨【Ultra-low Power Consumption and High Performance】LoRa-E5 Mini Development Board is an easy-to-use compact development toolset for you to unlock the powerful performance of the LoRa-E5 STM32WLE5JC. It consists of a LoRa-E5 Mini Board, an antenna(EU868/US915), a USB type C cable, Sticker and a 1X12pin male pin headers..
  • ✨【Easy Testing and Rapid Prototyping】The sleep current of LoRa-E5 modules on board is as low as 2.1 uA(WOR mode). It is a user-friendly board for easy testing and rapid prototyping..
  • ✨【Full GPIOs Led Out to Rich Interfaces】LoRa-E5 Dev Board also has rich interfaces, including RS-485, Grove, and etc. Developed to unlock the full functionality of the LoRa-E5 module, LoRa-E5 Mini Dev Board has led out full 28 pins of LoRa-E5 and provides with rich interfaces including Grove connectors, RS-485 terminal, male/female pin headers for you to connect sensors and modules with different connectors and data protocols, saving your time on wire soldering..
  • ✨【Long-distance Transmission Range to 10km】LoRa-E5 Mini Dev Board features an ultra-long transmitting range of LoRa-E5 up to 10km in an open area, extremely low chip power consumption, and user-friendly interfaces. Note: Ideal value in open area..
Check Stock

Orange Pi 5 8GB Rockchip RK3588S 8-Core 64 Bit Single Board Computer, Up to 2.4GHz and 8K Video Codec Support Development Board Run Orange Pi/Ubuntu/Debian/Android 12 OS (Pi 5 8GB+ Power Supply)

  • ... [8K VIDEO CODES SUPPORT]: Orange Pi 5 up to supports 8K @ 60fps, the powerful video codec allows for clearer images and more detailed picture quality which greatly improves the user experience..
  • [ABUANDENT INTERFACES]: Orange Pi 5 development board provides abundant interfaces, including HDMl 2.1 output, 26 PIN expansion port, M.2 PCle2.0, USB Type-C port, Gigabit LAN port, 2*USB 2.0, 1*USB 3.0, etc. The Orange Pi 5 can be widely used in tablets, edge computing, artificial intelligence, cloud computing, AR/VR, intelligent security, smart homeand other fields, covering AloT various industries.Orange Pi 5 will let you to enjoy technology life!.
  • [SUPPORT OPEN SOURCE]: Orange Pi 5 single board computer can build computer, wireless server, games, music sounds, video and speaker. The Orange Pi 5 development board can run Orange Pi OS(Droid)/Ubuntu/Debian/Armbian/Linux/Android 12 OS..
  • [PACKAGE LISTING]: 1*Orange Pi 5 development board, 1*5V4A type-c power supply(Depends on set you ordered) NOTE: It will take 10-15 days if the parcel is shipped from China, Not as long as Amazon suggests. T....
Check Stock

Digilent Zybo Z7 Zynq-7000 ARM/FPGA SoC Development Board Zybo Z7-20

  • Zybo Z7 comes in two APSoC variants: Zybo Z7-10 features Xilinx XC7Z010-1CLG400C. Zybo Z7-20 features the larger Xilinx XC7Z020-1CLG400C. Either....
  • A feature-rich, ready-to-use embedded software and digital circuit development board with a rich set of multimedia and connectivity peripherals to....
  • Built around the Xilinx Zynq-7000 AP SoC, with 650MHz dual-core Cortex-A9 processor and DDR3 memory controller with 8 DMA channels.
  • On board user interfaces include 6 push buttons, 4 slide switches, 5 LEDs, 2 RGB LEDs, and more.
  • Expansion opportunities with six Pmod connector ports, over 30 FPGA I/O, four Analog capable 0-1.0V differential pairs to XADC, and more.
Check Stock

JacobsParts WT32-ETH01 ESP32 Module Ethernet WiFi Bluetooth Development Board 100Mbps RJ45

  • The issue with the top soldered pins has been resolved, they are now shipping with separate unsoldered pins WT32-ETH01 is an embedded serial to Ethernet module based on the ESP32 series WT32-S1 MCU. The module integrates an optimized TCP/IP protocol stack, which is convenient for users to easily complete the networking functions of embedded devices while reducing development time cost. In addition, the module is compatible with half-pad and through-hole connectors..
  • The board width is a universal width and therefore, it can be directly soldered to boards, connectors, or even breadboards, which is convenient for users to use in different scenarios..
  • ESP32 series IC is an integrated 2.4GHz Wi-Fi and Bluetooth dual-mode SOC, with ultra-high RF performance, stability, versatility and reliability, as well as ultra-low power consumption..
  • ESP32 Module: WT32-S1 240MHz dual core microprocessor 4MB SPI flash memory Oboard 10/100Mbps RJ45 Ethernet (LAN8720A PHY) 802.11n WIFI Bluetooth 4.2.
Check Stock

Module A9G Board, A9G Development Board GSM/GPRS + GPS/BDS Module Wireless Data Transmission + Positioning Board

  • ★[A9G Development Board] – The A9G development board is a versatile development board based on A9G GPRS / GSM + GPS / BDS module that can be used to validate the basic communication functions and peripheral functions of the A9G module..
  • ★[Multifunction] – A9G development board with the basic phone / SMS, GPRS networking communications, GPS / BDS dual-mode positioning capabilities..
  • ★[Specification] – A9G development board contains a lithium battery charging management, microphone, speaker interface, USB communication interface, multiple user keys / led, TF card slot, accelerometer, I2C2 interface, ADC interface..
  • ★[External Interface] – A9G development board camera expansion board, an external 30W / 200W camera.A9G development board coin machine expansion board, can be external traditional coin machine..
  • ★[After-Sale Service] — Good day. every effort to provide customers with satisfactory service.If you have ANY questions, please email us and BELIEVE us, we will reply you soon..
Check Stock

waveshare Original Raspberry Pi Compute Module 4 IO Board for All Variants of Compute Module 4,with Real-Time Clock Dual MIPI DSI/CSI Interfaces,USB Connectors

  • The Compute Module 4 IO Board is a companion board for all variants of Raspberry Pi Compute Module 4(supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products..
  • The Compute Module 4 IO Board is designed to allow you to create systems quickly using off-theshelf parts such as HATs and PCIe cards, which might include NVMe, SATA, networking, or USB. The major user connectors are located along one side to make enclosures simple..
  • Connectors: Standard Raspberry Pi HAT connectors with PoE support. Standard PCIe Gen 2 x1 socket. Various jumpers to disable specific features, e.g. wireless connectivity, EEPROM writing..
  • RTC : Real-time clock with battery socket and ability to wake Compute Module 4 Video: 2 x MIPI DSI display FPC connectors (22-pin 0.5 mm pitch cable) Camera: 2 x MIPI CSI-2 camera FPC connectors (22-pin 0.5 mm pitch cable).
  • USB: 2 x USB 2.0 connectors. Micro USB socket for updating Compute Module 4. Ethernet: Gigabit Ethernet RJ45 with PoE support..
Check Stock

DollaTek SIMCOM SIM900 GSM GPRS Quad-Band Modules 2G Development Shield Board for R3 Mega with Antenna

  • Quad-Band 850/900/1800/1900 MHz - could work on GSM networks in all countries around the world, work with Uno Mega.
  • Embedded TCP / UDP stack - allows you to upload data to a Web server | RTC supported | selectable serial port | Jac speakers and headphones.
  • Note: This is a new version (64M version), SMS support MMS: Multimedia message and Short Message Service - so it is possible to send small amounts of data over the network (ASCII or raw hexadecimal).
  • The shield allows you to get SMS, MMS, GPRS and audio via UART by sending AT commands (GSM 07.07, 07.05 and SIMCOM enhanced to commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module (They are all 2V8 logic) present on board..
  • Application: M2M (Machine 2 Machine) Applications.Remote control of appliances.Remote Weather Station or Wireless Sensor Network.Vehicle tracking system with a GPS module.Good to learn GSM / GPRS mobile phone development, control development of remote equipment, wireless meter reading, smart appliances, ultra long distance control, etc..
Check Stock

7Pcs ATTINY88 Microcontroller Development Board 16Mhz I2C and SPI 26-PWM Digispark ATTINY85 Nano V3.0 Extended Module

  • ATTINY88 micro development board based microcontroller development board similar to the board line, only cheaper, smaller, and a bit less powerful..
  • With the ability to use the familiar IDE the MH-ET LIVE Tiny88(16.0Mhz) is a great board to jump into electronics, or perfect for when an other board is too big or too much..
  • ATTINY88 micro development board has 26 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
  • ATTINY88 micro development board support for the IDE 1.0+ (OSX/Win/Linux).
  • The MH-ET LIVE Tiny88(16.0Mhz) is fully assembled except for the headersincluded and easy to solder them by yourself..
Check Stock

SparkFun IoT RedBoard - ESP32 Development Board -ESP32 WROOM MCU Module USB-C Connector Qwiic Connector MicroSD Card -ESP32 Dimensions: 2.3in x 2.7in x 1.08in

  • The IoT RedBoard is an ESP32 WROOM-equipped development board that has everything you need in an Uno with extra perks like USB-C, Qwiic, and more..
  • IoT RedBoard Features: CPU and On­Chip Memory. ESP32-D0WD-V3 embedded, Xtensa dual-core 32-bit LX6 microprocessor, up to 240MHz. 448KB ROM. 520KB SRAM. 16KB SRAM in RTC.
  • Also Features: Wi­Fi, 802.11b/g/n. Bit rate: 802.11n up to 150Mbps. A-MPDU and A-MSDU aggregation. 0.4µs guard interval support. Center frequency range of operating channel: 2412 ~ 2484MHz..
  • We've included 3.3V voltage translation and a Qwiic connector to the edge of the board to allow for quick and seamless connection to our ever-growing line of I2C based Qwiic products. The board even includes a microSD socket if your application requires you to log and save data to a memory card..
  • The IoT RedBoard can target a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming, and MP3 decoding..
Check Stock

AITRIP 5PCS ESP-WROOM-32 ESP32 ESP-32S Type-C USB Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino

  • Package: You will get 5 Pieces Type-C USB ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE Features:.
  • ESP32 development board support lua program, easy to develop, support LWIP protocol, Freertos, three modes : AP, STA and AP + STA..
  • Dual core ESP-32 development board, 2.4GHz Dual Mode Development Board.
  • Small size: ESP-32 dual-mode module is compact and easy to embed into your device, convenient to use.
  • The best power and RF characteristics are safe, reliable and scalable for various applications..
  • 5PCS ESP32 Development Board TYPE-C USB CH340C WiFi+Bluetooth Ultra-Low Power Consumption Dual Core ESP32-DevKitC-32 ESP-WROOM.
Check Stock

KeeYees 3pcs ESP8266 ESP-12E Development Board WiFi WLAN Wireless Module CP2102 for NodeMCU for ESP-12E for Arduino

  • The controllers are easy to program by using the CP2102-USB interface without having to press the flash and reset buttons before each flash operation..
  • The development board has integrating GPIO, PWM, IIC, 1-Wire and ADC all in one board. Support smart link smart networking..
  • The fast and affordable technology for WiFi. Make your development the fastest way combined with firmware for NodeMcu..
  • Modern, state-of-the-art LUA technology. It is an integrated unit with all available resources on board. It's very easy for Arduino projects or any development board with I / O pins..
  • Modern Internet development tools can use the built-in API to instantly put your idea on the fast track..
Check Stock

3 Pieces ESP WROOM 32 ESP32 Development Board 2.4GHz WiFi Dual Cores Microcontroller Integrated with Antenna RF Low Noise Amplifiers Filters

  • Package contains: you will get 3 pieces of ESP-32 2.4GHz dual-mode WiFi development boards, enough for your daily use and replacement.
  • Multiple functions: ESP32 development board integrates antenna switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules.
  • And the entire solution occupies the smallest printed circuit board area.
  • ESP-32 development board is safe, reliable and scalable to various applications, bringing you a lot of convenience.
  • Small size: ESP-32 dual-mode module is compact and easy to embed into your device, convenient to use.
  • Low power consumption: the development board uses 2.4GHz dual-mode Wi-Fi, chip ESP-WROOM-32, and 40nm low power consumption technology.
Check Stock