Reviews Electronic Regulators

HEAVY DUTY TORCH & CUT ATTAC

  • SET OF 2 REGULATORS - OXYGEN 249-499B and PROPANE 249-500B.
  • A Set of Pre-Set Regulators, one for the Oxygen Tank and the other for Fuel made by Smith Equipment, Regulators are designed to use with disposable tanks. Ideal for the Smith Little Torch, when using them in Hobby and Craft also for Jewelry Repair and soldering work..
Check Stock

27in Steel Wheeled Bag

  • SEAC MATE REG is the bag for scuba diving, designed to store and transport your regulators in complete safety while avoiding contact with the rest of your equipment..
  • SPACIOUS: SEAC MATE REG is spacious enough to hold both regulators and your computer..
  • EASY AND RESISTANT CASE: Easily adapts to the shape of your regulators, easy to carry, zip closure..
  • Made of 600D Polyester. Dimensions: Ø12.8" x 3.9". Colour Black..
Check Stock

Royal Gourmet GB8000 8-Burner Liquid Propane Event Gas Grill BBQ Picnic or Camping Outdoor Black

  • 8 stainless steel tube burners with 13,000 BTU each, total 104,000 BTU cooking power.
  • supporting gas system includes 2 sets of regulators for stable,....
  • 950 sq. in. cooking surface with 1/4" diameter porcelain wire cooking grates, grill more than 60 burgers or 120 hot dogs at once.
  • Electronic ignition system offers a reliable spark with every push.
  • 2 large capacity grease cups underneath firebox help grilling last long, draw-out....
  • 2 folding side tables offer additional prep and work space.
  • 2 levels of heavy duty shelves provide sufficient storage space.
  • Ideal for big events in Company, Church, School, Restaurant, or other commercial use (LP tanks are not included). Ignition Type-Electrical.
Check Stock

Royal Gourmet Event 8-Burner BBQ Propane Gas Grill with Cover, Picnic or Camping Outdoor

  • 8 stainless steel tube burners with 13,000 BTU each, total 104,000 BTU cooking power.
  • supporting gas system includes 2 sets of regulators for stable, even flame.
  • 950 square inches cooking surface with 1/4” diameter porcelain wire cooking grates, grill more than 60 burgers or 120 hot dogs at once.
  • Feature integrated folding windscreen to protect grilling.
  • Updated GB8000 II design avoids paint peeling while getting hot.
  • Durable stainless steel control panel with big knobs, electronic ignition system offers a reliable spark with every push.
  • 2 folding Aluminum surface side tables provide additional workspace, stable while setting 25 LBS stuff.
  • Large capacity grease collection underneath firebox helps grilling last long.
  • Together with 60 inch length waterproof cover to protect grill against any bad weather and keep it dry and safe for all seasons.
Check Stock

Biltek Dual Gauge Oxygen & Acetylene Solid Brass Regulator for Welding Victor Gas Torch Cutting - CGA540 and CGA200 Rear Mount Fitting

  • These Oxygen and Acetylene Regulators easily replaces the worn out regulators in your welding kit. An ideal item to have on hand for any welder..
  • Replacement Oxygen and Acetylene Regulators for Victor Style Welding Kits.
  • Single Stage Regulator with 2" Diameter Gauges.
  • Oxygen Outlet Pressure: 0-100 PSI | Acetylene Outlet Pressure: 0-30 PSI.
  • Compatibility: Fits Most Victor Style Torch Sets.
Check Stock

The Weekend Brewer Ball Lock Cornelius Keg Pigtails by

  • MUST HAVE for all cornelius keg owners. Allows for injecting CO2 in and dispensing beer out of standard ball lock kegs..
  • 5FT OF GAS TUBING allows for your CO2 tank to be placed in a convenient position. Competitor products make you compromise with only 3ft..
  • EASY CLEANING by removing the MFL disconnect and running water through the tubing. Most competitor products use barb disconnects with pex clamps which is extremely difficult to clean..
  • WORKS WITH ALL STANDARD REGULATORS. Includes swivel nut for mfl regulators. Remove swivel nut for barb regulators..
  • Upgrade your current regulator to our ultimate regulator that works with 5 types of CO2 tanks.
  • including paintball, sodastream, CO2 cartridges, and standard welding tanks. Search B071ZNP5BS to learn more..
Check Stock

The Weekend Brewer Ball Lock Cornelius Corny Keg Gas Line Assembly

  • MUST HAVE for all cornelius keg owners. Allows for CO2 injection of standard ball lock kegs. CM Becker Disconnect ensure a tight seal every time..
  • 5FT OF TUBING allows for your CO2 tank to be placed in a convenient position. Competitor products make you compromise with only 3ft..
  • WORKS WITH ALL STANDARD REGULATORS. Includes swivel nut for mfl regulators. Remove swivel nut for barb regulators..
  • EASY CLEANING by removing the CMB MFL disconnect and running water through the tubing. Most competitor products use barb disconnects with pex clamps which is extremely difficult to clean..
  • Upgrade your current regulator to our ultimate regulator that works with 5 types of CO2 tanks.
  • including paintball, sodastream, CO2 cartridges, and standard welding tanks. Search B071ZNP5BS to learn more..
Check Stock

NABOWAN Solid Rubber Sheets,Strips,Rolls 1/8\ (.125\) Thick x 11.8\ Wide x 47\ Long, Thin Neoprene Rubber, Perfect for DIY Gasket Material, Sealing, Liner, Shield, Padding, Mat

  • Excellent resistance to heat (dry air),Remains flexible at low temperatures of -40ºC.Keep constant even at high temperatures, Good electrical insulation.Continous use Temp: -60 To 200 Celsius Degrees,hardness: 60+/-5 Shore A,Material: Silicone Rubber sheet.
  • Resistant to ultra-violet light, ozone and weathering processing,pharma ceutical and cosmetic manufacturing area.
  • Keep constant even at high temperatures, Good electrical insulation.
  • Application:Gasket, diaphragm, Automotive, and lighting sectors, control devices, welding curtains, regulators, pumps,LED and electronic components.
  • Package Included: 8x8x1/8"(203x203x 3mm)Red silicone rubber sheet Roll.
Check Stock

Air Regulator with Gauge 125 psi 180F

  • Includes: Air Gauge, Pipe Size - Regulators: , Pipe Size (Regulators): 1/4".
Check Stock

PISCSID 74505-06 HARLEY Voltage Regulator Rectifier Fit For Harley Davidson Electra Glide Classic 2006-2008,ROAD KING CLASSIC 2006-2008,2006-2008 FLT FLH Street,498269,498276

  • COMPATIBLE MODELS: Voltage Regulator Rectifier Fit for 2006 2007 2008 Glide 2006 2007 2008 Road Glide 2006 2007 2008 Road King 2006 2007 2008 Street Glide.
  • OEM NUMBER: Replaces HARLEY-DAVIDSION voltage regulator part numbers:H 74505-06 74505-06A 498269 49-8269 498276 49-8276. Please check OEM number before buying..
  • HIGHT QUALITY: Voltage regulator rectifier ueses original stabilivolt and advanced heat conduction system to control the output. Voltage stabilize at 12V to Protech Battery System, Lights,Reduce Load, and Extending Mortorcycle Service Life.ALL Regulators have been Tested Strictly to make sure every regulator have original HARLEY regulator Performance..
  • GOOD MATERIAL:Voltage rectifier regulator use high quality aluminum Shell , highest grade and thick aluminum substrate , high-performance electronic components..
  • SATISFAY AFTERSELL SERVICE:All Voltage Regulator Rectifier will Test Before Shipping. If you have Any Dissatisfaction with Our Product, Please let us Know and we will.
Check Stock

SÜA Oxygen Regulator Welding Gas Gauges

  • CGA-540 Inlet Fitting, (Connection to Tank).
  • 9/16" - 18 RH Type B-B Outlet Fitting, (Connection to Hose).
  • Max Inlet Pressure: 3000 psi - Delivery Pressure Range: 0-145 psi.
  • Medium to Heavy Duty Regulators - Body: Forged brass, Bonnet: Powder Coated, UV resistant Code Color Composite Knob.
  • ***READ THIS BEFORE YOU BUY*** Please check all the Pictures with the Dimensions of the Connectors, and make sure that these Regulators fit your Tanks and Hoses..
Check Stock

2 Piece Dual Welding Gas Gauges Oxygen (CGA-540) and Acetylene (CGA-510) Regulators Combo

  • Replacement Oxygen & Acetylene Regulators.
  • Oxygen Outlet Pressure: 0-200 PSI | Acetylene Outlet Pressure: 0-30 PSI.
  • Please check the item specifications carefully before buying, and make sure that these Regulators fit your Tanks and Hoses..
Check Stock

Molence DIY Electronics Components Kit Assortment, Resistors 1818PCS, LED, Triode, Capacitors, Diodes, PCB, Potentiometer, Variable Resistance, Stabilivolt for Arduino UNO MEGA2560 Raspberry Pi MCU

  • This kit Includes 1818pcs of the most important and useful electronic components. Would be a great gift for a family member or friend who tinkers with electronics..
  • 820PCS 1/4W 1% Tolerance Metal Film Resistor.
  • 100% compatible for Arduino UNO, MEGA, Raspberry Pi, PLC, Microcontroller..
  • All of electronics components are well packed and assorted in a re-use storage case, convenient to carry and use..
  • The product undergoes rigorous inspection before leaving the factory. If you are not satisfied with the product, please feel free to contact us and we will provide a full refund..
Check Stock