Reviews Electronic Enclosure With Fan

Adafruit 1947 Touch Shield, 2.8\ TFT for Arduino with Capacitive Touch

  • This enclosure is only compatible with the Circuit Playground Express!.
  • This minimal but elegant acrylic case will turn your board into an electronic snowflake.
  • The enclosure is designed to snap together securely with no tools required.
  • lic case will turn your board into an electronic snowflake. The enclosure is designed to snap together securely with no tools required. You can still press all the buttons and slide the switch thanks to a clever plastic widget fitted inside.
  • The case winds around all the touch pads so you can still touch them or attach alligator clips.
Check Stock

GDSTIME 2 Pack 80mm x 25mm Dual Ball Bearings High Speed 4500RPM 12V DC Brushless Cooling Fan

  • ...tion】This 80mm high speed fan can be used for cooling / ventilation in CNC Controller Box, Car Audio Amplifier, Inverter, Power Supply, LED Grow Lights, Battery Box, Vivarium, etc..
  • 【Direct Replacement】as a standard size 80x80x25mm fan, it can be used to replace old broken 80 mm fans found in various electronics and machinery.
  • 【High Speed】This high rpm fan is designed to maximize airflow and suitable for noise tolerant environments.
  • Such as work shops, outdoor electric cabinets, truck, etc. max. 43.2 dBA @ 4500 RPM.
  • 【Powerful Airflow】The fan moves a lot of air.
  • you can use this fan for cooling a device or increasing ventilation or airflow at a particular place. Airflow: 59 CFM.
  • 【Dual-Ball Motors】The fan features a brushless motor.
  • precision dual-ball bearings have a lifespan of 50,000 hours and allows the fans to be laid flat or stand upright.
  • 【Easy to Install】Fan size (edge to edge): 3.15 x 3.15 x 0.98 in. (80 x 80 x 25 mm).
  • Hole to Hole Distance: 2.82 x 2.82 in. (71.5 x 71.5 mm).
  • The fan can be used as both intake or exhaust fan inside your electronic enclosure or server chassis.
  • 【XH 2.54mm 2 Pin Plug】It is a 2-pin connector fan with 11.8 in. enough long power wires.
Check Stock

Altelix Light Ivory Vented NEMA Enclosure 14x11x5 (9

  • Durable Commercial Grade Light Ivory Polycarbonate + ABS NEMA Box with Reinforced Hinges, Dual Latches, Tamper-Proof Locking Screw and Provision for Padlock. IP24 Rated.
  • Dual 3" Vents and Thermostat Controlled Cooling Fan. NEMA Type 3R, 3RX / IP24..
  • Inside Space for Equipment Up to 9" x 8" x 3.2" Max. Outside Dimensions: 13.4 x 10.4 x 4.7 Inches..
  • Plug-and-Play Enclosure. Includes pre-wired 120 VAC outlets and 5 foot USA 3-prong power cord..
  • Ideal for Protecting Wi-Fi Equipment, Security and Surveillance Equipment, Concealment of Electronic Devices, Industrial Automation, Home Automation, Sprinkler / Irrigation Timers, Warehouses, Public Areas as well as ideal for rapid deployment systems..
Check Stock

StarTech.com USB 3.0 / eSATA 5-Bay Hot-Swap 2.5/3.5” SATA III Hard Drive Enclosure with UASP – 5-Bay SATA 6 Gbps Enclosure for HDD / SSD (S355BU33ERM)

  • Connect five hot-swappable 2.5/3.5″ SATA III hard drives to your computer externally through USB 3.0 with UASP or eSATA.
  • Compatible with USB & eSATA enabled laptop & desktop computers and 2.5in & 3.5in SATA hard drives.
  • External Hard Drive Enclosure / USB 3.0 eSATA HDD Enclosure / 5 Bay Hard Drive Enclosure / USB 3.0 or eSATA Back-up Drives.
  • Expand the storage capacity of a small form factor system or laptop.
  • Add a 5-bay hot-swap enclosure to a server or workstation.
Check Stock

StarTech.com 3.5" External Dual Hard Drive Enclosure Raid USB-C and USB-A SATA 6Gbps 2 Bay USB 3.1 SSD/HDD Enclosure (S352BU313R)

  • Create high performance external storage with a dual SATA HDD RAID array through USB 3.1 (10Gbps).
  • 2-Bay 3.5" HDD Enclosure with RAID support, including RAID 0, RAID 1, JBOD and SPAN (BIG).
  • 2-Bay hard drive enclosure supports SATA I/II/III (up to 6Gbps) and USB 3.1 Gen 2 (backward compatible with USB 3.0 / USB 2.0).
  • Dual 3.5" HDD/SSD/SSHD External Drive Enclosure provides high speed, high-capacity external data storage for your USB-C or USB-A laptop or computer (both USB-C and USB-A cables included).
  • Solid aluminum enclosure with metal hard-drive mounting tray and built-in fan to assist in heat dissipation / 2-drive 3.5" HDD/SSD RAID enclosure / 2-bay 3.5in enclosure / 2-bay 3.5" HDD RAID enclosure / 2-bay 3.5" SSD enclosure / Dual 3.5" HDD enclosure / Dual bay SATA enclosure / 2-bay 2.5" RAID enclosure.
Check Stock

MistCooling Hydro Breeze Bully Fan (30\ Oscillating 1500 Psi Pump 6 Nozzles)

  • ...to 40 Feet - Fan Size: 24'' or 30'' oscillating - 3 Speed - Fan UL507 rated for outdoor and Indoor use -Built in Air-cooled OHV gas engine Generator -5 hours’ run-time with -1 Gallon Fuel Tank Easy to hook with any Garden Hose or Faucet Built in 5 Micron Filtration - Built in Thermal Safety Switch Outdoor Durable enclosure.
  • System: Does Not Require Water or Electric Connections - Portable Power Generator - 30 Gallon Water Capacity - 7-10 hours of run time per fill - 30'' High Velocity Oscillating Mist Fan - 6 Nozzle Mist Ring.
  • - Specially Designed Rolling Cart with All Terrain Tires - Creates large volume of ultrafine mist - UL rated fan for outdoor use - Ultrafine Brass/Stainless Steel Mist Nozzles - 160 Or 1500 PSI HP mist pump in steel enclosure - Stainless Steel Mist Ring on HP System - Lightweight yet durable aluminum frame cart - Corrosion Resistant.
  • Fan: Rust resistant Powder Coated Finish High Output Performance 3 Speed full chain Industrial Grade Aluminum Blades Fully Adjustable Wall Mount 10ft Pre-wired For Indoor Outdoor use OSHA Approved Grill.
  • SS Misting Ring: Made with Industrial Grade 3/8'' Rigid Stainless Steel 316 Compatible with all High and Mid Pressure Mist Pumps Pre-threaded nozzle slots for 10/24 Thread Rated for up to 2000PSI Att....
Check Stock

Zulkit Project Box ABS Plastic IP65 Waterproof Dustproof Electrical Junction Box Enclosure Black 3.94 x 2.68 x 1.97 inch (100x68X50mm) (Pack of 2)

  • Product Name: Waterproof Junction Box, Electrical Boxes, Project box.
  • Outer Size of project enclosure: 3.94" x 2.68" x 1.97"(100x68X50mm)(L*W*H).
  • Inner Size of electronic enclosure: 3.7" x 2.4" x 1.7"(93X61X44mm)(L*W*H)- - (Allowable Error: ±2mm).
  • High Quality Material: Made of ABS material, Sturdy and terrific for making those DIY projects. Easy to drill and shape openings for many items like meters, LCDs, sockets, LEDs, buttons and so on..
  • IP65 Waterproof & Dustproof Rating: Solid construction and IP65 waterproof & dustproof rating to protect against dust, corrosion and splashing water, durable for years use.
  • Package Content: 2 x Junction Boxes, Ideal for electronic projects, Arduino enclosure, power supply units, temperature controller box, etc..
Check Stock

Yottamaster 4 Bay RAID Hard Drive Enclosure 2.5' 3.5' USB3.0 to SATA3.0 External HDD SSD Enclosure,RAID Drive Storage Support 72TB & RAID 0/1/3/5/10/JBOD RAID Mode [FS4RU3]

  • 【72TB Enterprise-class Storage Capacity】This 4 bay raid enclosure supports 4 hard drives with a max capacity of 72TB(18TB for single disk).Great for video editing, photo backup, storage of R&D technical documents, archival backup, music libraries, financial records, storage of video surveillance recordings and corporate data storage. With 4 indicator lights to monitor the operating status of each hard drive. Plug-and-play hot swapping..
  • 【Full RAID function, Flexible Storage Solution】Yottamaster 4 bay raid drive enclosure is the ultimate storage solution for demanding video workflows on location and in the studio. Supports RAID 0/1/3/5/10/JBOD/CLONE/Normal RAID modes.
  • Manage massive amounts of media from multiple cameras on location or in the studio with up to 72TB of RAID storage in one system..
  • 【Support 2.5"/3.5" HDD & SSD】The raid enclosure is designed for both 2.5" SSDs where speed is the priority and for 3.5" HDDs when it's important to maximize the storage capacity. The removable aluminum trays allow for easy installation and replacement of the drives. Your hard drives can be firmly fixed on the tray by provided screws, which can effectively protect your hdds from shock and interface damage..
Check Stock

ORICO 5 Bay Hard Drive Enclosure USB 3.0 to SATA 3.5 inch Enclosure Magnetic Tool-Free External HDD SSD Enclosure Storage Case Built-in Fan for Data Backup NAS Expansion Up to 80TB 5x16 - DS500U3

  • Tool-Free Installation -- The orico 3.5 hdd enclosure designed with magnetic chips on the cover, no screws and tools needed to helps you easily install the hard drives in 3 seconds to saving your time and improving your working efficiency..
  • Up to 80TB Large Capacity -- The usb hard drive enclosure can support all 3.5 inch SATA hard disks and up to 80TB for every single 16TB storage disk, convenient for enterprise data backup and exchange, also a good tools for the nas expansion..
  • Super-Speed Transmission -- Multi bay usb 3.0 hard drive enclosure, internal SATA, with 2.5 inch and 3.5 inch SATA HDD / SSD connect USB 3.0 high-speed, the 5 bay 3.5 sata hdd enclosure with the speed transmission reaches up to 5Gbps, about 20% faster than the traditional USB2.0..
  • Built-in double ball bearing fan -- A built-in 120mm double ball bearing fan which has good performance on high rotating speed and long service life, the 5 bay 3.5inch enclosure with design of large-area honeycomb holes in the rear panel can helps the heat dissipation..
  • Multi-protection -- Anti-over voltage, over-current, overheat, short-circuit, leakage and other multiple protection designs to ensure the security of data transmission of the usb3 external drive enclosure. Compatible with Supports Windo....
Check Stock

SainSmart Large 3D Printer Enclosure, 20.9'' x 24.2\ x 28.9\

  • Consistent Temperature: The SainSmart 3D Printer Enclosure reduces heat losses and prevents external factors that might alter your prints, keeping the printing area at a consistent temperature, delivering stable and smooth printing results..
  • Noise & Dust Reduction: A enclosure helps to reduce the annoying fan noise while printing, making it more viable for home and school use. It also protects your printers from dust..
  • Safe to Use: The lining of enclosure uses pure aluminum film material, equipped with stainless steel supports, stable structure and a large space. Folding storage, easy to install and carry..
  • Better organize your printing area: the enclosure is equipped with multiple tool pockets and holders on each side, keeping your printing area clean and tidy..
  • With a large area measuring 73.5cm x 61.5cm x 53cm (20.9'' x 24.2" x 28.9"), this enclosure is compatible with Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 V2 Neo, Ender-3 S1 Pro, Ender-3 Max, Ender-3 Max Neo, Ender-5 Pro, CR-6 SE, CR-10, CR-10 Smart Pro..
Check Stock

Honeywell SV9641M4510 Upgraded Replacement for Furnace Smart Gas Valve

  • These controls communicate directly with an electronic fan timer (ST9160 Electronic Fan Timer for single stage applications.
  • ST9162 Electronic Fan Timer for two-stage applications) in typical forced warm air furnace applications.
  • It can directly interface with the appropriate power supplies and a system thermostat for additional appliance applications.
  • When controlled directly by a thermostat, these controls do not provide a post purge function, because power to the control is removed when the thermostat call for heat ends.
  • The Systems are suitable for a wide range of fan-assisted combustion gas-fired appliances including furnaces, rooftop furnaces, boilers, unit heaters, infrared heaters, water heaters and commercial cooking appliances.
Check Stock

Hydro Breeze Bully Fan - 30 Inch Oscillating Fan - With Portable Outdoor Generator - Outdoor Rated Fan- For Dust control, Outdoor Cooling, Warehouse Cooling - (30\ Oscillating 1500 Psi Pump 10 Nozzles)

  • ...0PSI) Air Throw: Up to 40 Feet - Fan Size: 24'' or 30'' oscillating - 3 Speed - Fan UL507 rated for outdoor and Indoor use -Portable Power Generator -5 hours’ run-time with -1 Gallon Fuel Tank Easy to hook with any Garden Hose or Faucet Built in 5 Micron Filtration - Built in Thermal Safety Switch Outdoor Durable enclosure.
  • System: Does Not Require Water or Electric Connections - Portable Power Generator - 30 Gallon Water Capacity - 7-10 hours of run time per fill - 30'' High Velocity Oscillating Mist Fan - 10 Nozzle Mist Ring.
  • - Specially Designed Rolling Cart with All Terrain Tires - Creates large volume of ultrafine mist - UL rated fan for outdoor use - Ultrafine Brass/Stainless Steel Mist Nozzles - 160 Or 1500 PSI HP mist pump in steel enclosure - Stainless Steel Mist Ring on HP System - Lightweight yet durable aluminum frame cart - Corrosion Resistant.
  • Fan: Rust resistant Powder Coated Finish High Output Performance 3 Speed full chain Industrial Grade Aluminum Blades Fully Adjustable Wall Mount 10ft Pre-wired For Indoor Outdoor use OSHA Approved Grill.
  • SS Misting Ring: Made with Industrial Grade 3/8'' Rigid Stainless Steel 316 Compatible with all High and Mid Pressure Mist Pumps Pre-threaded nozzle slots for 10/24 Thread Rated for up to 2000PSI At....
Check Stock

ORICO 4 Bay HDD Raid Enclosure USB External Hard Drive Enclosure Aluminum Magnetic SATA III Disk Storage Case Tool-Free for 2.5/3.5 SSD HDD Support 64TB(4X16TB) for Data Backup NAS Expansion NS400RU3

  • 【4 Bay Raid External Enclosure】-- The 4 bay hdd enclosure can support about 7 kinds of raid modes, you can use the raid function to combine your hard drive or improve your data transmission rate. More raid modes the 4 bay enclosure supports, more convenient in your daily work and life..
  • 【64TB Large Capacity Enclosure】-- The 4 bay sata enclosure can fits 3.5inch and 2.5inch with a bracket SATA SSD and HDD, and each slot can support up to 16TB hard disk, altogether 64TB, good for data storage and nas expansion for enterprises, self-media workers and who works with much data transfer. You can also use it to store large games, work materil, your family memories and backup of camera video..
  • 【Faster Enclosure, 1GB Files for 3 Seconds】-- By adopting high quality chip controller, the drive bay enclosure supports SATA III protocol, the data transfer rate can reach up to 5Gbps(MAX), it can backward compatible with USB2.0/1.0, very stability and easy to carry the huge data interaction of enterprise, reduce the delay..
  • 【Fast Cooling Hard Disk Enclosure】-- The drive bay enclosure is make by 4mm thickness aluminum board body and magnetic enclosure door. There's a cooling fan which the diameter is 92mm built in the usb drive bay enclosure, with a honey....
Check Stock