Reviews Electrical Equipment Parts

Akfix A60 Electrical Contact Cleaner Spray - Non-Corrosive Flux Remover, Electronic Spray Cleaner for Computers, Keyboard, Monitor Screen, Battery, Safe Metal Cleaner | 1 Pack, Can, 6.7 Oz.

  • Since the electrical components and equipment are so delicate, regular cleaners should not be used to clean them. Here is Akfix A60 Contact Cleaner for that! Spray and finish it thanks to its special formula..
  • - The essential characteristic of our electronic cleaner spray is the capacity to swiftly evaporate, leaving no residue..
  • Effectively removes dirt, light oil, grease, flux and dust from electrical equipment and electronic devices. It is recommended to be tested on sensitive plastics, adhesive-mounted or stressed parts..
  • - This contact cleaner is equipped with a unique non-corrosive formula to make the connectors and contact parts more efficient to use..
  • A60 metal cleaner spray is an economic cleaning spray that is ideal for computer, battery, keyboard, and digital equipment. You can easily use it to clean any type of metal connector and contact..
Check Stock

Micarta Paper XX Phenolic Sheets .188\ (3/16\) Thick x 12\ x 36\ 3 pcs

  • Bakelite is a man-made synthetic chemical substance. Once it is heated and formed, it will solidify and can no longer be molded into other things. Because it has the characteristics of non-absorption, non-conductivity, high temperature resistance, and high strength, it is widely used in electrical products..
  • Bakelite board is also called phenolic laminated paperboard. It made of phenolic resin made from high-purity, Wood boards made of resin adhesives..
  • Good electrical performance at room temperature, good mechanical processing performance, specific gravity 1.45, warpage ≤ 3‰, with excellent electrical, mechanical and processing properties..
  • The insulating board is suitable for insulating structural parts in motors and electrical equipment with high mechanical performance requirements. Good mechanical strength, mainly used in the processing of insulating parts in test fixtures, silicon rubber button molds, fixture plates, mold splints, table polishing pads, packaging machines, tea trays, combs, etc..
Check Stock

Aopin 3 Pin Freezers Compressor 1/6HP 125W 15 Ohm Thermal Overload Protector + Refrigerator PTC Start Relay 1Pcs

  • ►Tip: When purchasing overload protection parts, carefully compare the parameters and appearance of the replacement parts to avoid....
  • ►It is suitable for maintenance and assembly of refrigerators and freezers of various brands.
  • ►The PTC chip 3pin 15 ohm starter, butterfly relay compressor electrical equipment.
  • ►The replacement must be checked and the electrical parameters of the original should be consistent..
  • ►The refrigerator doesn't work? First, check whether your refrigerator compressor is damaged by the start relay! Refer to your manual to ensure that....
Check Stock

GOONSDS Bakelite Board 2PCS Laminate Raw Materials for Laboratory and Silicone Rubber Mold,10x100x150mm

  • Bakelite is a man-made synthetic chemical substance. Once it is heated and formed, it will solidify and can no longer be molded into other things. Because it has the characteristics of non-absorption, non-conductivity, high temperature resistance, and high strength, it is widely used in electrical products..
  • Bakelite board is also called phenolic laminated paperboard. It made of phenolic resin made from high-purity, Wood boards made of resin adhesives..
  • Good electrical performance at room temperature, good mechanical processing performance, specific gravity 1.45, warpage ≤ 3‰, with excellent electrical, mechanical and processing properties..
  • The insulating board is suitable for insulating structural parts in motors and electrical equipment with high mechanical performance requirements. Good mechanical strength, mainly used in the processing of insulating parts in test fixtures, silicon rubber button molds, fixture plates, mold splints, table polishing pads, packaging machines, tea trays, combs, etc..
Check Stock

GOONSDS Insulation Electrical Board Bakelite Phenolic Board Sheet Laminate Raw Materials for Laboratory and DIY,300x300x5mm

  • Bakelite is a man-made synthetic chemical substance. Once it is heated and formed, it will solidify and can no longer be molded into other things. Because it has the characteristics of non-absorption, non-conductivity, high temperature resistance, and high strength, it is widely used in electrical products..
  • Bakelite board is also called phenolic laminated paperboard. It made of phenolic resin made from high-purity, Wood boards made of resin adhesives..
  • Good electrical performance at room temperature, good mechanical processing performance, specific gravity 1.45, warpage ≤ 3‰, with excellent electrical, mechanical and processing properties..
  • The insulating board is suitable for insulating structural parts in motors and electrical equipment with high mechanical performance requirements. Good mechanical strength, mainly used in the processing of insulating parts in test fixtures, silicon rubber button molds, fixture plates, mold splints, table polishing pads, packaging machines, tea trays, combs, etc..
Check Stock

GOONSDS Bakelite Phenolic Board Sheet 2PCS Laminate Raw Materials for Laboratory and Electrical Machinery Parts,150x200x5mm

  • Bakelite is a man-made synthetic chemical substance. Once it is heated and formed, it will solidify and can no longer be molded into other things. Because it has the characteristics of non-absorption, non-conductivity, high temperature resistance, and high strength, it is widely used in electrical products..
  • Bakelite board is also called phenolic laminated paperboard. It made of phenolic resin made from high-purity, Wood boards made of resin adhesives..
  • Good electrical performance at room temperature, good mechanical processing performance, specific gravity 1.45, warpage ≤ 3‰, with excellent electrical, mechanical and processing properties..
  • The insulating board is suitable for insulating structural parts in motors and electrical equipment with high mechanical performance requirements. Good mechanical strength, mainly used in the processing of insulating parts in test fixtures, silicon rubber button molds, fixture plates, mold splints, table polishing pads, packaging machines, tea trays, combs, etc..
Check Stock

GOONSDS 6 PCS Bakelite Board Laminate Raw Materials for Silicone Rubber Mold and Electrical Machinery Parts,100x150x3mm

  • Bakelite is a man-made synthetic chemical substance. Once it is heated and formed, it will solidify and can no longer be molded into other things. Because it has the characteristics of non-absorption, non-conductivity, high temperature resistance, and high strength, it is widely used in electrical products..
  • Bakelite board is also called phenolic laminated paperboard. It made of phenolic resin made from high-purity, Wood boards made of resin adhesives..
  • Good electrical performance at room temperature, good mechanical processing performance, specific gravity 1.45, warpage ≤ 3‰, with excellent electrical, mechanical and processing properties..
  • The insulating board is suitable for insulating structural parts in motors and electrical equipment with high mechanical performance requirements. Good mechanical strength, mainly used in the processing of insulating parts in test fixtures, silicon rubber button molds, fixture plates, mold splints, table polishing pads, packaging machines, tea trays, combs, etc..
Check Stock

GOONSDS Bakelite Phenolic Board Sheet 10 Pieces Laminate Raw Materials for Silicone Rubber Mold, Length 100mm, Width 100mm,Thickness 4mm

  • Bakelite is a man-made synthetic chemical substance. Once it is heated and formed, it will solidify and can no longer be molded into other things. Because it has the characteristics of non-absorption, non-conductivity, high temperature resistance, and high strength, it is widely used in electrical products..
  • Bakelite board is also called phenolic laminated paperboard. It made of phenolic resin made from high-purity, Wood boards made of resin adhesives..
  • Good electrical performance at room temperature, good mechanical processing performance, specific gravity 1.45, warpage ≤ 3‰, with excellent electrical, mechanical and processing properties..
  • The insulating board is suitable for insulating structural parts in motors and electrical equipment with high mechanical performance requirements. Good mechanical strength, mainly used in the processing of insulating parts in test fixtures, silicon rubber button molds, fixture plates, mold splints, table polishing pads, packaging machines, tea trays, combs, etc..
Check Stock

Micarta Linen LE Phenolic Sheets .250inch (1/4inch) Thick x 12inch x 36inch,Natural(KS-2356-21-10)

  • ✤ Insulating rod has the characteristics of insulation and no static electricity, making it a mold for insulating switches, variable resistors, and machinery for electronic products..
  • ✤ Good physical properties: The insulating rod has a certain degree of temperature resistance and is used for tooling molds. Instantaneous temperature resistance of 140°C, long-term temperature resistance of 90°C, and can be used in a variety of high-temperature environments..
  • ✤ Product application: It is suitable for electrical machinery, electrical equipment and insulating structural parts with high mechanical performance requirements, and is used in electronic workshops, chemical machinery, aviation industry, petrochemical and other fields..
  • ✤ Excellent insulation: high mechanical strength, toughness and wear resistance, dimensional stability, corrosion resistance. Excellent performance, good electrical performance at room temperature, and good mechanical processing performance..
  • ✤ Material: Phenolic resin. The insulating rod corrosion resistance, precision machining processes.Anti-insulation,high hardness,easy processing,non-absorbent, non-conductive.widely used in electrical products..
Check Stock

QTEATAK 2pcs 9v Battery Holder with Switch and Lead Wires

  • 1. It is suitable for DIY and maintenance of all kinds of dc equipment, with screw hole at the bottom and wire preinstalled, it is easy to use..
  • 2. Easy to install: The battery is very convenient to install and replace the battery, and it is not easy to damage other parts..
  • 3. Tough material: using tough material, high strength, good toughness, not easy to crack..
  • 5.Applications: toys, electronic DIY, bread board power supply, LED lighting power supply, low voltage electrical equipment, remote control, radio,....
Check Stock

AIMIMI Bakelite Rod Brown Insulating Sticks Phenolic Resin Electrostatic Prevention Suitable for Structural Parts Length 500mm,Diameter,35mm

  • ✤ Insulating rod has the characteristics of insulation and no static electricity, making it a mold for insulating switches, variable resistors, and machinery for electronic products..
  • ✤ Good physical properties: The insulating rod has a certain degree of temperature resistance and is used for tooling molds. Instantaneous temperature resistance of 140°C, long-term temperature resistance of 90°C, and can be used in a variety of high-temperature environments..
  • ✤ Product application: It is suitable for electrical machinery, electrical equipment and insulating structural parts with high mechanical performance requirements, and is used in electronic workshops, chemical machinery, aviation industry, petrochemical and other fields..
  • ✤ Excellent insulation: high mechanical strength, toughness and wear resistance, dimensional stability, corrosion resistance. Excellent performance, good electrical performance at room temperature, and good mechanical processing performance..
  • ✤ Material: Phenolic resin. The insulating rod corrosion resistance, precision machining processes.Anti-insulation,high hardness,easy processing,non-absorbent, non-conductive.widely used in electrical products..
Check Stock

WE4M527 - OEM Upgraded Replacement for GE Dryer Timer Control

  • The GE Appliances WE4M532 Timer is a genuine OEM (Original Equipment Manufacturer) part designed and engineered to exact specifications.
  • Replacement GE Appliances Dryer Timer controls the electrical components and the duration of the dryer cycles.
  • GE Appliances WE4M532 Dryer Timer has electrical specifications of 115V AC - 60Hz.
  • High quality GE Appliances OEM WE4M532 Dryer Timer is manufactured with premium materials for durability and exact fit, be sure to follow instructions in owners manual when installing this part.
  • Repair your appliance with confidence when you choose Genuine GE Appliances Parts & Accessories.
Check Stock

Buyers Products 1809065 Hitch Plate , Black

  • 1/2" hitch plate with 2" receiver tube fits ford 1999-2008+.
  • Pre-Punched holes fits multiple electrical adaptors.
  • More Than Just Parts: From snow and ice equipment to toolboxes, hydraulics, towing, truck and trailer hardware to our innovative lighting products-it's amazing what Buyers Products can do for your truck.
  • We Do Things The Right Way: We design products like we're building them for ourselves, because we are.
  • Our teams are staffed with engineers and experts who know how to make a product exceptional.
  • Durable and Dependable: Founded in 1946, Buyers Products has become a leader in the truck equipment industry though our commitment to customer care, innovation, and value across our range of products.
Check Stock