Reviews Electrical Clamp

BTMETER AC/DC 1000A Clamp Multimeter, 4000 Counts Digital Clamp-on Meter with Data Logging Measure Amp Volt Ohm Capacitance Frequency Temperature Continuity, Electrical Tester 570T-APP

  • ...er size 1.77 inches (45mm), allows you non-contact measuring multiple wires at the same time. ❗Please separate the hot and neutral conductors or they will cancel each other out and give zero amp reading, just clamp on the LIVE line for accurate amperage testing❗.
  • ⚡【Electrical Data Logger】Get rid of hand-written notes or complicated maths. With this intelligent clamp amp meter, all electric measurements will be displayed on your phone or tablet, auto graph a trend chart, support to sharing out in Excel, TXT format. This clamp-on ammeter is reliable on remotely troubleshoot electrical problems in HVAC, household, commercial, etc..
  • ⚡【Clamp Meter with Temp Test】 Comes with thermocouple probe for high temperature measurement with range of -4 ~ 1832℉(℃/℉ optional). Designed with tough edge cover to withstand jobsite drops. Qualified with electrical IEC 61010-1, CAT IV 600V, CAT III 1000V, Class 2, Double insulation safety standards..
  • ⚡【Easy to Use】With loads of functions to help you get the jobs done all in this one versatile digital clamp multitester. Data Hold to freeze reading for easy reading.
Check Stock

Fieldpiece SC680 - Wireless Power Clamp Meter

  • Mid-size clamp meter has every parameter for electrical and thermal HVACR testing in one meter.
  • One of the most durable clamp meters in the industry that gives higher accuracy VAC & AAC readings on VFD with True RMS sensing technology.
  • Ranges include temperature, capacitance, microamps DC for flame diode tests, and everyday electrical ranges for HVACR.
  • Auto and manual ranger with safety features including a high-voltage LED and beeper, a continuity warning, push button non-contact voltage (NCV).
  • Detachable leads and alligator probe tips for safe and easy one-handed testing.
Check Stock

OWON Current Clamp Meter Multimeter CP-05+ Clamp Current Probe 200KHz 400A for Oscilloscope 4A 40A 200A 200-400A Test Range with BNC Connector

  • ...le.Low noise level, and high detection accuracy..
  • ¡¾Easy to Use¡¿The current clamp has range selection settings, set by a slider switch on the handle of the probe. In use there is no need to break into the circuit or disturb the isolation as the opening jaws simply clamp around the current carrying conductor. No electrical contact is required. These current clamps have been designed for use with oscilloscopes..
  • ¡¾Portable¡¿Special value kit for electrical professional who is looking to add on DC and AC current measurement capabilities to their DMM. Includes a roomy carry case to hold and protect your meter and current clamp, plus extra storage for your AC/DC Current Probe. Auto zero at power on, relative zero correction .Low noise level, and high detection accuracy. 100% money back guarantee & 1YEAR WARRANTY..
Check Stock

Wireless Bluetooth Clamp Meter, INFURIDER YF-7200APP 6000 Counts Auto-Ranging Digital Voltmeter Ammeter Measures DC AC Volt Amp Ohm Clamp on Multimeter with Capacitance,Temp,Diode Tester

  • ...value easily in darkness.The volt amp meter feature with data hold,low battery indication.Compact and portable design make the amperage meter easy to carry and use..
  • 【NCV Function】Our clamp on multimeter with non contact voltage function,can detection effectively check electrical status through measuring without touching any wires.Light and sound alarm if detects AC voltage 90-1000V or live wire.Easy to use for troubleshooting your electrical and household problem..
  • 【Safety Current Clamp】This ammeter with overload protection in all range,safety measure AC DC current with the clamp,so you don’t have to strip any wires.You MUST separate the live wire and neutral conductors when you measure AC current,otherwise the degree will always be zero.INFURIDER provide an 365-DAY worry-free warranty and efficient customer service..
Check Stock

Amprobe AT-8030 Advanced Industrial Wire Tracer Kit

  • Traces AC/DC circuits from 0 - 600 V. The transmitter and receiver are CAT IV 600 V safety rated for electrical circuits in industrial environments.
  • Offers two output frequency modes for optimal tracing- 6 kHz for energized circuits- 33 kHz for de-energized circuits.
  • Features three power modes: “High” power mode for normal circuits, “Low” power mode for precision tracing in difficult areas and "Clamp" power mode provides a boosted induction signal via the optional signal clamp.
  • Includes a Signal Clamp (CT-400) clamp-on attachment for inducing a signal in wires where you don’t have access to bare conductors.
Check Stock

Digital Clamp Meter, ACEGMET 6000 Counts AC Current Amp Meter Non Contact Voltage Tester AC/DC Voltage Tester with Amp, Volt, Ohm, Continuity, Diode and Resistance Test 600A Clamp Multimeter

  • ...ues. It handles up to 600 AC amps, 600 AC/DC voltages, and 6000 ohms of resistance. All to do is utilize its broad jaws that are 32mm in size. With them, you can comfortably measure the current without interrupting the power. you can see that the current meter is basic and compact enough to take around for resident electrical tasks. In addition, the overall interface is also effortless to understand.
  • It should be both accurate and durable because you – as an electrician, have to work in harsh environments. Their body must also be well-made to withstand falling or some substantial external impacts. Digital clamp meter offer a safe, effective way to test electric currents without stripping wires. Whether you are a homeowner or a professional electrician, you can use a multimeter clamp to troubleshoot and resolve electrical issues. The dimensions are precise and quickly relayed to you..
  • A amp clamp meter is a handheld device. As such, it should be portable, durable, and easy to use. It is a amp tester with a glowing LCD screen. Always opt for a model that works well in both dim and bright conditions. You might be testing a wire in a vehicle or a crawlspace. Where ever your electrical work takes you, you want to be well-prepared. we were able to gar....
Check Stock

Woods Clamp Lamp with 10 Inch Reflector and Bulb Guard (300 Watt Bulb, 6 Foot Cord)

  • VERSATILE LAMP CLAMP: Lets you direct light where you want. Ideal for use in office or home.
  • Ideal for a temporary heat source for pig and chicken brooders.
  • CLAMP LIGHT FEATURES: An attached 6 foot cord 18 AWG SPT-2.
  • spring clamp grips that will not damage surfaces.
  • PORTABLE, ON-DEMAND LIGHT SOURCE: The adjustable clamp lamp sports a nifty size. Easy to carry around and set up alternative light.
  • SATISFACTION GUARANTEED: A leader in a wide variety of electrical and electronic products, surge protectors, garden lights, timer products and other accessories, deliver strong performance every day.
  • GROW LIGHT CLAMPING LAMP: Can be used as a grow light during the cold months for indoor plants. Makes a great light source for indoor gardens.
  • INDOORS CLAMP-ON LAMP: Has a metal guard to protect the bulb. Can be used as a desk lamp clamp, table lamp clamp, bedside lamp clamp, or a studio work light.
Check Stock

VCT Xenon Timing Light Automotive Tools Cars Truck Engine Auto Shop DIY Mechanic Tool

  • FEATURES · Xenon Automotive Timing Light · Bright Xenon Bulb Makes Timing Mark · High.
  • CARS & TRUCKS Pro Xenon Automotive Timing Light Tune Up F10 This Item Is Brand New!.
  • Very Easy To Read · Highly Accurate At Any Speed · Clamp-on Inductive Pick-up.
  • Trigger Activated · Dependable Solid State Circuit · Automatic Reverse Polarity & Overload.
  • Protection · 4FT Long Electrical Wire of Clamp · 4FT Long Test Electrical Wire · Work.
  • Use in Shady areas for best use. Light is hard to see in bright light/sun light.
  • Working time to be within 5- 10 minutes, DO NOT USE longer that 10 min at a time, you will over heat the unit causing damage to timing light..
Check Stock

allsun AC/DC Current Mini Clamp Meter Probe Tester Handheld Digital Electrical Clamp Multimeter CAT III Max.Input 400A/600V 50Hz-60Hz LED

  • 〖Quick and Accurate AC/DC Amp Clamp Meter〗 is based on Hall Effect technology and is designed to be used in conjunction with multimeter for ac and dc current measurements..
  • 〖Max. Jaw Opening〗The Clamp measures the AC current in a conductor up to 33mm without interrupting the circuit, Max. Conductor Size: ∅ 28mm..
  • 〖Power/Low Voltage Indication〗When the battery's voltage is enough, the LED lights green. When the battery's voltage is less than about 7.5V, the LED lights red indicating that the battery is not high enough and should be replaced immediately..
  • 〖Multifunctional & Easy to use〗Range Switch, Used to turn on/ off the Current Probe as well as to select the desired,range, ZERO Button, AC/DC Button, AC/DC Button..
  • 〖Handheld Electrical Tester〗AC/DC Current Probe Digital Clamp Multimeter, it's suitable for the electrical repair,quality assurance.
Check Stock

ETCR2100A+ Digital Clamp Ground Earth Resistance Tester Meter 0.01Ω-200Ω

  • Clamp Size:Φ1.26"(32mm),Clamp table size: 10.24"×3.54"×2.6"(260mm × 90mm × 66mm).
  • Structural Feature：Clamp CT,and can measure the ground fault which can not be measured by traditional method.
  • Measuring ground system with loop, there is no need to disconnect the ground wire without auxiliary electrode, which means safer and faster.
  • Multi keyboard operation panel, new alarm and save functions.
  • This Clamp meter widely applied in ground resistance measurement, loop resistance measurement in fields such as electric power, telecommunications, meteorology, oil field, architecture and industrial electrical equipment, etc.
Check Stock

Aicevoos 528D Digital Clamp Meter Multimeter 4000 Counts Amp Voltage Tester Auto-ranging, Measures Current Voltage Temperature Capacitance Resistance Diodes

  • MULTIFUNCTION DIGITAL CLAMP METER: Accurately measure AC current (do not measure DC current)! AC/DC voltage, frequency , resistance, capacitance, diode, continuity and temperature tests are also available. This clamp meter is a very useful tool for solving industrial and household electrical problems.
  • NCV DETECTION FUNCTION: Non-contact voltage detection effectively checks the electrical status by measuring the strength of the electromagnetic field without touching any wires.
  • when the multimeter senses a weak AC signal, the indicator light will be on..
  • MULTIFUNCTIONAL: Support data hold, temperature measurement, automatic shutdown, low battery indication and continuity buzzer. High-definition backlit LCD display and LED flashlight make it easy to deal with dark environments..
  • PROFESSIONAL MULTIMETER: Auto-ranging dial design and NCV non-contact measurement. HOLD for data hold function,FUNC for function switching, REL for DC measurement zero adjustment..
  • LARGE JAW OPENING: The jaw opening measures AC current in conductors without touching or interrupting the circuit.To measure the current you need to clamp the meter around one of the wires and not the whole power cord. Its slim and compact size makes it easy to operate in tight spaces..
Check Stock

TYRAREX Automotive Test Probe 6-24V Auto Power Circuit Diagnostic Tool Electrical System Tester with LED Lights

  • 【AUTOMOTIVE POWER PROBE】This power probe is the best electrical tester for reducing diagnostic time in all 6 to 24 volt vehicle electrical....
  • 【POLARITY IDENTIFICATION】It can help you quickly identify the positive and negative polarity. When the probe touches the positive"+", the red....
  • 【EASY TO OPERATE】1. Unroll the unit's cable. 2. Clamp the red clip to the positive terminal of the vehicle's battery. 3. Clamp the black clip to....
  • 【WIDE APPLICABLE】Carry out the following tests on systems from 6V up to 24V quickly and efficiently. Equipped with a 4.5m cable that makes your....
  • 【Worry-Free After-Sales】We offer 7x24 hours friendly customer service to ensure your shopping experience. If you have any issues about the Power....
Check Stock

Tenma 72-7228 True RMS Compact Clamp Meter

  • 【Reliable Clamp Multimeter with True RMS】Accurate AC/DC voltage current, resistance, capacitance, frequency, temperature, diode, continuity test and non-contact AC voltage detection, the Clamp Meter is fully functional and easy to use for labs factories radio-technology and household..
  • 【Auto-Ranging with NVC】The meter will automatically select the appropriate auto range.
  • NCV detects the existence of AC voltage on conductors and cables in-wall, troubleshooting electrical problems in a safe and user-friendly way.
  • 【Clamp Measuring】Clamp jaw measures AC current up to 28mm without interrupting the circuit, which makes it much safer to use on mains cables and high current loads in vehicles.
  • 【Continuity Test & Overload Protection】 Designed to Safely and Accurately Confirm the Circuit Electricity with Low Voltage Indication and Overload Protection. Light Alarm If Detects the AC Voltage(90V-1000V) or Live Wire..
  • 【Features】high resolution, large backlit LCD screen and clamp light to improve visibility in dark place. Low battery display and automatic power off after 15 minutes inactivity. A soft zippered pouch included keeps everything neatly together and organized.
  • portable to carry and use. Widely used in your life..
Check Stock