Reviews Efi For Ls Swap

GSL392 Inline Fuel Pump & 58 PSI Fuel Filter Regulator 58 PSI LS Swap Fuel Pump EFI Conversion Fuel Filter Pressure Regulator 255LPH High Pressure External Pump 6AN Fittings 400-939 GSL392-400-939

• REPLACEMENT 58 PSI FUEL FILTER REGULATOR - Fuel pressure regulator filter kit comes with 6AN adpater fittings for LS Swap , which can deliver 58 PSI (4 BAR) to your fuel rail and return unused gas to the tank. Besides, it can ensure the clean fuel is delivered properly to your engine with a 10 micron fuel filter, which play an important role in protecting the daily operation of the engine, and extending the engine service lifespan..
• GSL392 HIGH PRESSURE FUEL PUMP - LS Inline fuel pump is designed to start higher-pressure fuel racing or performance-purpose vehicles stably and safely, which can help to meet the requirements of most modern turbocharging applications. At 80 PSI, Yinlowa 255 lph high pressure fuel pump can flow around 132 liters (35 gallons) per hour.
• At that same 80 PSI the equivalent HP (high pressure) fuel pump can flow over 210 liters (50 gallons) per hour.
• FITMENTS - GSL392-400-939 Inline Fuel Pump fits EFI applications including turbo and supercharged, variety of pressures and flows available, including high pressure performance.
• 58 PSI Fuel Pressure Regulator AN-6 Fittings for LS Swap EFI Conversion i....

EVIL ENERGY 6AN 3/8 PTFE LS Swap EFI Fuel Line Fitting Kit E85 Nylon Braided Fuel Hose 25FT

• PTFE nylon braided fuel line kit mostly used in EFI LS system and can be used as fuel injection hose, ls engine swap and EFI conversion fuel line,....
• Inner Diameter: 5/16". Outside Diameter: 0.465inch. Please measure before purchase!(Includes: as shown in the picture.).
• Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. AN-6 nylon braided....
• PTFE fuel hose can be compatible with all automotive fuels, lubricants, and coolant..
• PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..

HOLLEY MODULAR LO-RAM EFI MANIFOLD KIT,TOP-FEED PLENUM,BLACK FINISH,COMPATIBLE WITH GM LS1,LS2 & LS6 GEN III & IV ENGINES

• Brand New Holley Modular Lo-Ram EFI Manifold Kit, Top-Feed Plenum, Black Finish, Compatible with LS1, LS2 & LS 6 Gen III & IV Engines (Part #300-620BK).
• The 300-620 top-feed plenum entry configuration is designed to allow the included Hi-Ram 105mm plenum top to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications was conceived to package with an air to water plenum mounted intercooler with a shorter overall height than possible with other existing intake manifolds..
• The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III & IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The fuel rail kits come with 2 sets of brackets: A set for long (usually standard length) fuel injectors & set for short (such as Pico, or LS7) fuel injectors..
• NOTE: Total Height: Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top - 9.07" (without intercooler installed) | Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top, w/ intercooler installed - 9.07" + intercooler thickness.
• Specs: Brand: Holley EFI | Color: Black | Construction: Cast | Emission Code: 3 ....

Fuel Filter/Regulator 4 BAR with -6AN Inlet and Outlets Stainless Steel for LS swaps and EFI conversion

• Fuel filter & pressure regulator for LS swap with no adapter fittings required..
• 58 PSI (4 BAR) regulated pressure output, perfect for LS swaps and many EFI conversions..
• Aftermarket 5 micron fuel filter and pressure regulator manufactured with AN -6 inlet and outlets..
• Connect directly to your -6AN hose or hard line..
• For custom/aftermarket application only. AN-6 ends will not fit hoses in original GM application..

Fuel Filter/Regulator 58 PSI Kit with AN-6 Fittings for LS swaps and EFI conversion

• Simple fuel supply for LS swap with AN-6 adapter fittings included..
• Your electric fuel pump works continuously & this bypass regulator passes excess fuel back into the tank so the pump can run freely. This filter-regulator is commonly installed near the tank so that only a short return line is required..
• This is a popular fuel supply solution for fuel injection (EFI / FI) retrofits and for swaps to modern engines like the GM Gen III and Gen IV "LS" V8s..

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

• ...(-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
• 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
• 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in half..

RULLINE Motor Mount Adapter Plate SBC Vehicle to LS Engine Universal Swap Bracket Small Block LS Conversion Adjustable LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 LR4 Billet

• 【LS Conversion】 These LS swap motor mounts will allow you to swap a 1997-2013 LSX style engine into any Chevy application that originally used 3....
• 【LS Swap】—— The Chevy LS engine swaps into MOST 60's and 70's Chevy pickups and cars such as Camaro, Nova, Chevelle, and Impala among others.
• 【4 Adjustable Positions】The ls motor mount kit Machined 6061 billet aluminum,Designed to allow four positions in order to accommodate the widest....
• 【Premium Quality】——Made of CNC Aluminum Alloy Material, they are precision-cut to provide a secure fit to the block and motor mount,These ls....
• 【Include】2 pcs ls motor mount adapter, 8 flat head bolts, and 6 flange M10-1.5 bolts..

A-Team Performance - Fabricated Intake Manifold w/Drive By Wire 102mm EFI Throttle Body - Compatible with LS LSX LS1 LS2 LS6 Black

• 102mm Black Intake Manifold with EFI Drive by Wire 0° Opening Throttle Body Complete with Gaskets, Hardware, Black Fuel Rails, & Fuel Crossover Line.
• Compatible with Chevrolet Small Block V8 GEN. III/IV (LS-Based) 4.8 L / 293 in3 (LR4) 5.3 L / 325 in3 (L33, L59, LM4, LM7) 5.7 L / 346 in3 (LS1, LS6) 6.0 L / 364 in3 (LQ4, LQ9, LS2).
• Compatible With Cathedral Port LS LSX LS1 LS2 LS6 heads.
• Hardware - 3mm (1/8") thick T6061 Sheet Aluminum construction.
• Durability - The intake will not bend or flex With Boost Or Vacuum.

Speedmaster PCE148.1008 Qualifier Intake Manifold

E-Tuner 4

• EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body Short, Silver.
• Compatible With: Chevrolet Small Block V8 Gen. III/IV (LS-based) · 4.8 L / 293 In3 (L20, Ly2) · 5.3 L / 325 In3 (Lc9, Lh6, Lh8, Lmg, Ly5) · 6.0 L / 364 In3 (L76, L96, LFA, LY6) · 6.2 L / 376 LN3 (L92, L99, LS3, LSA)Rectangle Port Intakes only!.
• Fabricated Aluminum Sheet Metal Intake Manifold -102MM Throttle Body -Fuel Rails & Cross Over -4-Bolt LSX - Gaskets & Hardware are included..
• Throttle Body is Dive by Cable Overview We Designed Our Fabricated Aluminum Sheet Metal Intake Manifold to Improve the Look and Performance of Your LS Engine..

Vortech 4GX218-150L V-3 Si-Trim EFI Truck LS-Engine Swap Supercharger Kit

• For use with 1999-2013 GM Truck Front Engine Accessory Drive (Not....
• Tuner Kit (Fuel & Tuning Components Not....

ICT Billet LS Billet Coil Brackets Holley EFI Smart Coil Pack LS1 LS3 LS2 LSX Swap ICT 551575

• Made in Wichita, Kansas From Aerospace Grade, USA Produced, Billet Aluminum.
• Includes Two brackets and mounting hardware.
• Compatible With All 1999-2013 LS OEM Engines Valve Covers.

LTI Universal 10ft Nylon Stainless Steel Braided 5/8\ AN10 PTFE E85 Fuel Line Hose Injection (BLACK, 10AN)

• ...lly designed to work in any automotive project. this hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility..
• PTFE Nylon Braided fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high temperature high pressure applications..
• Application: fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes. Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Pressure Rating: Maximum Working Pressure (psi): 2000 psi. Bursting Pressure (psi): 6000psi..
• This hose is made of high-quality PTFE on the inside that gives them high chemical and heat resistance, along with a braided Black Nylon outside which gives them high durability, extreme pressure resistance, and Professional installation is highly recommended..
• 10AN PTFE E85 Fuel Hose Length: 10ft. Inner Diameter: 0.5" (12.95mm). Outside Diameter: 0.62" (16mm) . Please measure before purchase! Fit for AN PTFE hose end fitting ONLY..
• We Provided 12 months warranty from the date of purchased. Free return within....