Reviews Edge Beveling Tips

Tenryu MP-25580CB 10 80t miter pro blade

  • ATAFR (Alternative Top Alternate Face w/ Raker) Extra sharp cutting tips reduce load on saw. Face beveling diverts cutting load left and right instead....
  • Fully-hardened, expertly-tensioned tool steel bodies for true and accurate cuts..
  • High-grade, fine grain carbide tips for long life..
  • Super-fine grit honing of carbide edge for clean, smooth cuts..
  • Additional resin bond-filled expansion slots for even quieter cutting..
Check Stock

4 Pieces Edge Leather Beveler Craft Edge Beveler Cutting Beveling Leather Skiver Tool for DIY 1.5 mm 1.2 mm 1.0 mm 0.8 mm

  • 4 Sizes: heads of these leather bevelers have 4 different sizes, including 1.5 mm, 1.2 mm, 1.0 mm and 0.8 mm, different sizes can easily satisfy your....
  • Anti-rust material: the beveling tool is made of steel with a good wooden handle, lightweight and portable, sturdy and durable.
  • Reasonable bevel angle: these leather beveling tools have peaked edges and proper cutting angles, allowing you to trim and flatten edges of leathers....
  • Leather cutting tool kit: you will get 4 pieces leather edge bevelers with different sizes, enough quantity for you to use.
  • Multi-usage: these leather edge skiving bevelers are suitable for handbags, wallets, belts, leather bags and backpacks, etc., good gifts to people who....
Check Stock

BLUEROCK Tools Model CG-211Y Manual Pipe Cutting Machine - Track Torch Burner

  • Manual (No Electricity Required) 87" Chain Links for up to 24" Pipe.
  • Complete Torch Head Assembly with standard B-fittings, valves.
  • Torch Holder Assembly with adjustable straight or beveling angle mount and bars.
  • Cutting Tips: Includes #1, #2, #3 Acetylene GO2 (Similar to Airco brand). This unit can use Propane Tips as well with this set up..
  • Small and large wheel sets for both small and large pipes.
Check Stock

Dante Products Burner Pipe Silver

  • BLUEROCK CG-211C PIPE GAS CUTTING MACHINE.
  • Complete Motorized Magnetic Torch Pipe Cutting Kit Includes:.
  • CG-211C Motorized Machine with power control box and cords.
  • Complete Torch Head Assembly with standard B-fittings & valves.
  • Torch Holder Assembly with adjustable straight or beveling angle mount and bars Cutting Tips Qty 3 Acetylene G02 (Assorted Sizes. Similar to Airco....
Check Stock

Tenryu DA-185S-SL 7-1/4\ Saw Blade

  • New vibration dampening system featuring TENRYU resin filled laser cut body slots..
  • Meticulous, hand hammer plate tensioning for a flatter blade and truer cuts..
  • ATAF (Alternate Top Alternate Face) Extra sharp cutting tips reduce load on saw. Face beveling diverts cutting load left and right instead of straight on. Creates a better shearing action - especially in cross-grain, natural wood.
Check Stock

YVOKERN Leather Edge Bevelers with Polished Ebony Handle Leather Edge Tool French Wide Mouth Sharp Leather Skiver Edge Skiving for Leather Craft DIY Cutting 10MM

  • 5 sizes: The blades of the leather beveling machine have 5 different sizes, 4mm, 6mm, 8mm,10mm,12mm. Different sizes can easily meet your various....
  • The Leather edge beveler sharp arc-shaped shovel head design, the blade is sharp enough, can be used directly, no additional grinding is required, and....
  • The Leather edge tool with ebony smooth handle，the ergonomically rounded shape can minimize hand fatigue and comfortable to hold..
  • Professional French wide mouth peeling tools are good tools for all leather crafts, suitable for amateurs, beginners and experienced tanners to make....
  • Any place on the back of thin leather on this Leather edge beveler is light and portable. It is a good gift for people like leather DIY..
Check Stock

3M Flap Disc 577F, T27 Quick Change, Giant, 7 in x 5/8-11, 40

  • Alumina zirconia mineral with a grinding aid provides more cutting power than aluminum oxide across all metal types.
  • Flaps combine grinding and blending into one step for time savings.
  • Heavyweight polyester-backed flaps provide longer life on high-pressure applications such as sharp-edge work and beveling.
  • Quick change disc simplifies disc changes.
  • For those really big jobs, try the 3M giant flap disc 577F with 25 percent more thickness for aggressive cut and durability.
Check Stock

scottchen PRO Diamond Beveling Chamfer Bit 1-7/8 48mm x 5/8 -11 for Marble Glass Ceramic Countersink Hole Trimming for Angle Grinder

  • 【Function】The beveling chamfer bit designed to enlarge or trim round holes in ceramic, glass, granite stone tile marble etc. Also suitable to....
  • 【Application】The diamond beveling bit is 60 degree, 1-7/8”(48mm) diameter fit for the hole size from 3/16” to 1-3/4”. Note: it’s not for....
  • 【Material】Durable steel with diamond plating provide long lasting, even diamond particle will bring a smooth beautiful hole finish..
  • 【Using Tip】The diamond beveling chamfer bit suitable for both wet and dry use. Wearing mask and gloves to protect yourself during working..
  • 【Dimension】1-7/8”(48mm) diameter x 5/8”-11 threads arbor for angle grinder use only. Grit: #80. Degree: 60..
Check Stock

Tenryu PRF-20348CBN 8\ Carbide Tipped Saw Blade ( 48 Tooth MTCG Grind - 5/8\ Arbor - 0.087 Kerf)

  • Ultra-thin, perfectly tensioned steel plates for true run. This saves precious battery power and life..
  • Precision honed, high-grade carbide for easy, smooth cuts and long life..
  • Tooth configurations to meet specific cutting material and thickness applications..
  • ATAF (Alternate Top Alternate Face): Extra sharp cutting tips reduce load on saw. Face beveling diverts cutting load left and right, instead or straight on. Creates a better shearing action - especially in cross-grain, natural wood..
  • For finer cuts on 6-1/2-Inch cordless saws..
Check Stock

Tenryu MP-25560AB 10\ Carbide Tipped Saw Blade ( 60 Tooth ATAFR Grind - 5/8\ Arbor - 0.11 Kerf)

  • Individually hammer tensioned steel plates for true run..
  • Specially selected grade of carbide for excellent work in plastic..
  • TENRYU'S super fine honing leaves a mirror-like finish on the carbide for clean and melt-free cuts..
  • An excellent blade for use in plastic and acrylic materials..
  • ATAF (Alternate Top Alternate Face): Extra sharp cutting tips reduce load on saw. Face beveling diverts cutting load left and right, instead or straight on. Creates a better shearing action - especially in cross-grain, natural wood..
Check Stock

YVOKERN Leather Edge Bevelers, with Polished Ebony Handle Leather Edge Tool, 4/6/8/10/12MM French Wide Mouth Sharp Leather Skiver Edge Skiving for Leather Craft DIY Cutting (4MM)

  • ✨5 sizes: The blades of the leather beveling machine have 5 different sizes, 4mm, 6mm, 8mm ,10mm amd 12mm. Different sizes can easily meet your various needs..
  • ✨The Leather edge beveler sharp arc-shaped shovel head design, the blade is sharp enough, can be used directly, no additional grinding is required, and the peeling is smooth and uniform..
  • ✨The Leather edge tool with ebony smooth handle，the ergonomically rounded shape can minimize hand fatigue and comfortable to hold..
  • ✨Professional French wide mouth peeling tools are good tools for all leather crafts, suitable for amateurs, beginners and experienced tanners to make leather wallets, handbags, backpacks, belts, purses, etc..
  • ✨Any place on the back of thin leather on this Leather edge beveler is light and portable. It is a good gift for people like leather DIY..
Check Stock

ABRASIVE STONE CUP, 4\x 2\x 36 GRIT

  • Weiler Tiger AO 3 x 3 inch type 18R plugs deliver the right combination of performance and value. Aluminum oxide grains in combination with a strong bond deliver long product life and a consistent cut-rate when grinding metal. The type 18R shape features a rounded face that is ideal for ID cleaning, hole edge beveling, smoothing weld seams, removing gates and parting lines, and cleaning castings in hard-to-reach places. These plugs offer a 5/8-11 inch arbor and are designed for use on die grinders. Whether you are in a fab shop, foundry, or shipyard, you can count on Tiger AO cones and plugs to get the job done fast and done right..
  • Aluminum oxide grains provide an even, sharp, clean cut-rate and consistent performance..
  • Strong resin bond delivers a long cutting life..
Check Stock

OWDEN 3Pcs Leathercraft Modeling Tools 3Pcs Sizes S,M,L Leather Carving Modeling Tools kit.

  • OWDEN Brand 3Pcs. modeling tools kit with a red PVC pouch..
  • There are 6 worktips in 3 different size tools (S,M,L).
  • The small size tool (point and stylus) to draw beautiful and smooth lines on the leather..
  • The medium size tool (medium and large points spoon) for figure carving and to smooth beveling marks..
  • The large size tool (Medium and large round spoon) for figure carving and to smooth beveling marks..
Check Stock